I think what you want is on Page 64 of the manual. I don't know if you can save it to the machine, but you can import it from a USB drive.

I got it, thank you.

Cancel my precious email. I'm new to this machine and was pressing the wrong button. Cover Plate comes off fine.

The bobbin thread in my S9 became tangled. I got what I think are all the threads out, but my bobbin cover plate won't open. The button that slides sideways doesn't work. The plate is on crooked just

Our embroidery machines often malfunction when left unattended. Gremlins in the factory sneak in an Operator Proximity Detector, which lets the machine you have left it alone. It immediately goes wonk

I got the update installed OK. Thank you, Cat, for your help.

I found it and have saved the .pdf with the instructions. I inserted the USB into the machine and turned it on while holding down the needle up-down and lock stitch buttons. I got a yellow screen with

I am finally getting around to update my light blue Skyline S9. I followed the instructions so I have a USB stick with the extracted files on it. I put the USB stick into the machine and turned it on.

The Janome S9 group is on Facebook, but there are few postings. However, I find the Janome Sewing Classroom group there very helpful.

The book "Dream Sewing Spaces" by Janette Raney-Black has lots of ideas and an excellent section on ergonomic measurements for you sewing space. As for a chair, I have an office chair with no arms, a

It turns out that my needle threader works just fine. Operator error. I was holding the thread while using the needle threader in my S9. My husband suggested that I search online for the problem and o

I have a Skyline S9 and find that the 1/4" foot that came with it is not 1/4" from the center (default) needle position and the guide on the foot, page 90 of the manual. It is a generous 3/8". To get

I'm so glad that it was a cheap, easy fix. I learned to hold the bobbin with thread dangling down. If it makes a P it is Perfect so go ahead and install it. If it makes a q, quit and turn it over. Wit

My needle threader hasn't worked since I used a Klase needle I received as a gift when I ordered from Nancy's Notions. The needle threader caught in the needle eye and I had a time getting it out. I p

I have the S9, which I think is sort of a baby 15000. My needle threader is not "automatic" I manually push down on the threader lever. It works intermittently. Sometimes right away, sometimes only af

And "p" stands for perfect and "q" stands for quit. I learned that when I got my S9 last year.

It's called "Measuring Made Easy" the tape is the "Two Easy Tape" by Lorraine Henry. --- Kathleen Chevalier western Pennsylvania, USA Sent: Monday, September 4, 2017 7:36 AM To: janome12000@yahoogroup

It is my understanding that Verizon is discontinuing its email service. To change your email address on all your groups look at the very bottom of this, or any other janome12000 group posting, where y

Does anyone use pre-wound bobbins for embroidery in their machines. I have the S9. I have a ton of pre-wound bobbins left from my Pfaff 7570, whose motherboard bit the dust after 10 years. --- Kathlee

After the posts about the Janome machine updates page, I checked it out. I was surprised to find an update for my S9. I did register the warranty for my machine online, though I did not get an acknowl