Sewhat is so accurate!

Cat, I have a purple Tutto too! I bought mine for my Juki when I foolishly thought I might be lugging that monster (though not as heavy as the 15000) to class. I bought it from the Overstocked site an

Favy, My dealer told me to never use the seatbelt to secure the machine. He said he's seen screens crack due to this. Ceil

I have the machine on the second level and just strip her down and carry her. At 72 I can still manage. My dealer told me to just put the machine on the floor of my car, in the back behind the driver.

Update: The fusible fleece in the binding worked great. I cut it at 3/4 inch to go into my 2.25 binding and while next time I'd cut it thinner, it worked fine. Had to trim the binding close and the co

Thanks again, Favy, Then I'll take you up on your offer as I'm not able to visualize what you mean now that my backing is already on the quilt. Thank you. Ceil

Favy, Thank you so much but I don't think I gave enough information. The backing is already stitched down both between the blocks, the outer edges and also 1/8 inside the edges. I've been trying to re

Thank you all! I will try out these suggestions on some scraps today. And yes, I guess if this had happened when I was younger, I would have just put it down to not paying attention or too much going

Please help! I finally almost finished by Patchwork Pets quilt by AnitaGoodesign and was about to put the binding on when I noticed that when I trimmed the outer border pieces, I cut off all the batti

No, my dealer just put it back to the standard. I could not believe that I hadn't checked it so now put a post it note whenever I change something. Someday I'll have to figure out what the machine "re

Also make sure that you have the foot height set correctly. I tried everything (or so I thought) then brought my machine to my dealer who found that I had the foot height set wrong for embroidery and

My dealer told me that the safest place for my machine was on the floor behind the driver with no cover. I put a large old towel around it. I travel almost 3 hours when I visit him yearly. Ceil

I would never have learned to use my machine fully without the My15000 app! The workbook (which I have along with the addendums) is fine but not a substitute for the app in my opinion.

The newest edition of the workbook is complete and won't have any addendums. If you have the original version, that one has two.

Kathy, Leaders are small pieces of fabric that you put under you needle to begin to sew and then you sew off (leaving a few stitches in between) onto your project. It's very useful to use to begin and

You can also use a leader/ender to stop those goobers.

Thanks, Jim. I am a bit of a worrier but did manage to use it without a further problem for about another half an hour. So, hopefully, it is just a glitch. If it doesn't recur beforehand, I will menti

In the middle of an embroidery project, I had taken the hoop off to trim the fabric and the machine started making a ticking sound. I looked at the screen and it had various color stripes on it which

Roberta, It was a while ago but I either used a Superior Thread's size 12 topstitch, or the Janome purple tip, which I believe is a 14 ball point needle. I'm sorry that I don't remember and have start

I did one with a heavier stabilizer (I think it was cutaway but can't remember) and a wash away topper. I do remember that, after struggling to get the think into the hoop, I realized that I should be