You could download your designs from websites to your MAC straight to a thumb drive or you could use something like Dropbox which is free, and then move it to the windows 7 laptop/pc so if that’s all

Yes just make sure you have a good virus and malware program on it. There’s lots of people still using XP because the programs they use won’t work on anything later. Just be aware that newer programs

The rule of thumb for changing needles is approx every 8 hours of stitching. But some stabilisers like water soluble blunts needles quicker. I normally change needles when I’m starting a new project,

In windows 10 right click the zipped folder, click extract all that will leave you with the zipped folder and an unzipped folder. Move the zipped folder somewhere safe so that you have the original do

Are they old bobbins, they are plastic and can become brittle, if the bobbin is wound to tight that can also cause them to break. Some of my bobbins are starting to yellow (only way I can describe it)

I have a Janome 6600P semi industrial and it copes with all my heavy stuff. I wouldn’t put heavy stuff on my 12000 or my 15000, (similar to the 14000), I think they need lighter work on them, because

I haven’t got the 500e, but this happens with a lot of purchased designs, the start is away from the centre so the machine moves to the first stitch. When I want to pull the bobbin up I press the star

You won’t be able to use the wifi functions because the 14 isn’t wifi enabled. But I used the acudesign with dropbox and transferred to USB from Dropbox on my PC. You can get a USB that fits iPad and

I have my bobbin warning set to 0.5, from when I get the first warning to it stopping when in embroidery mode, I know I have around 3000 stitches. If it stops before the end of the design I gauge whet

Hi Jim, I’ve tried the 12000 foot pedal, it worked ok so it doesn’t look like it’s the socket on the machine, so husband is going to have a closer look at the 15000 pedal, he’s wondering if there’s a

Thanks Jim, he’s taken it apart and cleaned it out, he said it wasn’t bad inside, just a few bits of thread. Given the state of the carpet in there I’m surprised. 😂. He’s put a meter on it and it seem

Hi Jim, my foot pedal on my 15000 is throwing up an error message every few minutes, will the foot pedal from my 12000 work on the 15000? If I have to buy a new pedal, can I just buy the large pedal,

I’ve found it disengages when it’s too thick, if you’re using the narrower one which is the zipper, that might be why, it might need the wider foot.

I have found that bobbins jump around more if I have used a non branded bobbin that fits Brother, Janome and Singer. Once I bought Janome bobbins I found they fit better, the other bobbins are a diffe

I have the Quiltmaker 15000 upgraded from the 2.11 version, 12000, 350e and a 6600P, I use Schmetz Microtex needles with all of them, have no issues. I was using a Janome blue tip needle on my 15000 f

You can turn auto correction off in settings, general, keyboard, then about second switch down.

On the 15000, you load the design from the inbuilt library or from a USB ( you might want to edit it or change it, add designs to it) go into edit. Edit the design if need be, on the right of the edit

I’m in the UK I use the Sulky Polymesh cut away, I buy from Amazon.

I’ve never used the tape, I always cut the stabiliser wide and fabric wide enough to fold over the edge towards the inside if the hoop and put the magnets on that grips it all sufficiently, and if I f

Can the 14000 be upgraded to take the new plate and feet? The wifi might not be the only difference since the 15000 is now the Quiltmaker, had added feet, including the new ruler foot etc., and the ne