I'm super excited. I was able to get a good deal which delighted me because my new machine had been used in a quilt expo. The embroidery kit was unopened, but the machine box was open and because of t

Thanks for the feedback! My dealer called and said to come by and pick up the missing hoop.

I'm a newbie. I just got my 15000 and am wondering if it is normal to hear a chirp or adjusting sound every time I start to sew. I notice that the light on the presser foot button blinks at the same t

Jim, Thanks so much for the reply. Sheri in Texas

I'm new to embroidery and have only had my 15000 for 4 months. This weekend I was stitching an embroidery design and the bottom thread was showing on top. When I looked, there was tension setting for

Jim, thank you. That makes sense now. I was using the yellow dot bobbin holder, 40 wt. polyester on top and the Janome prefil bobbin on the bottom. After I found the SET screen adjuster, all went well

Donna, Thank you for the blue dot bobbin case suggestion. I'm working on quilting a quilt right now and this makes the back side look better Sheri

I am sooo excited and honored. I hope this doesn't sound like bragging since I am still on a huge learning curve for quilting, but I got the following email from the Houston Quilt Festival: "Congratul

Thank you - I have added my pictures to the Photos section of this group. It's showing up under my name and "Rainbow Fan". By the way - it is a Judy Neimeyer patter.

Cas, yes the quilting except for the stitch in the ditch was done as embroidery in the hoop. The quilt squares were 10" so I had to move the hoop around in each square since my designs were for an 8'.

RE: Re: How to support a large quilt when using AcuFil I love this group. I normally am in the learning mode, but I hope I have something I can share. I recently quilted a king size quilt (109 x 109)

Jim and Diane, Thank you so much for this and all of that you do! Merry Christmas to you and your family. Sheri in TX .

Question - I need a standard bobbin holder and have been confused about what part # to look for online. I do get most things through my dealer, but sometimes I have to shop online. In looking for the

My 15000 started skipping stitches, breaking thread, and thread pulling out of the take-up bar over a month ago. I took it in for annual maintenance and explained at the time. When I picked it up, the

I do the same thing Barbara does and it's made a world of difference. In essence, I am putting a little tension on the last position that holds the thread to keep the thread in place Sheri 15000 owner

Background: In February, the feed dogs went out of whack. I took my machine in where the tech had no experience on this problem. Machine was in warranty with this shop (5 year parts and labor), so I n

Jim, Many, many thanks for all you do and for this assistance. The problem with my machine was the timing. I believe I must have been pulling too hard when putting the binding on and I was reminded I

Jim, Thank you, thank you, thank you!!! I was having all sorts of problems with my MBX 4.5. This solved it (from 2012 no less). I really appreciate all that you and Diane do. Sheri

I've had the MBX 4.5 for years and have struggled with learning it. I did the Artistic Digitizer trial earlier this year and the thing that sold me was the training Anne Grieco Hein provided and the c

I started seeing small loops on the bottom side of my fabric. I have changed the following with no luck: thread, bobbin, needle, and bobbin holder. I have thoroughly cleaned my machine. I have checked