Date   

Re: Servicing of Janome 15000

Cat - N
 

I have not ever seen any oil 'dripping' anywhere after having my 15000 serviced.

- Cat (FL)


-----Original Message-----
From: Judy Jackson <judyjackson282@...>
Sent: Wed, Apr 28, 2021 12:36 pm

Hi all
Has anyone had a problem with excess oil dripping onto embroidery after servicing? Had my Janome 15000 back from shop on Monday, used it today for the first time since it’s service and I have had oil dripping onto work area when I’ve changed thread and used threader! I have complained to the shop and they say this can happen and it’s a fine line between enough oils and over doing the oil!! They say it’s coming from the take up lever and to rub it away.....which I have now but just wondered if it was bad servicing or a normal occurrence?
Judy, Cornwall U.K.


Re: Servicing of Janome 15000

Judy Jackson
 

Debbie, neither have I before this week.....after 20 plus years of machine embroidery. Doesn’t sound right does it?  
Judy 


On 29 Apr 2021, at 20:09, Debra Mclin <rick.debbie.mclin@...> wrote:


I have never had oil anywhere on my machine after servicing.
Debbie

On Thu, Apr 29, 2021 at 8:03 AM Judy Jackson <judyjackson282@...> wrote:
Hi all
Has anyone had a problem with excess oil dripping onto embroidery after servicing? Had my Janome 15000 back from shop on Monday, used it today for the first time since it’s service and I have had oil dripping onto work area when I’ve changed thread and used threader! I have complained to the shop and they say this can happen and it’s a fine line between enough oils and over doing the oil!! They say it’s coming from the take up lever and to rub it away.....which I have now but just wondered if it was bad servicing or a normal occurrence?
Judy, Cornwall U.K.






Re: Servicing of Janome 15000

Debra Mclin
 

I have never had oil anywhere on my machine after servicing.
Debbie

On Thu, Apr 29, 2021 at 8:03 AM Judy Jackson <judyjackson282@...> wrote:
Hi all
Has anyone had a problem with excess oil dripping onto embroidery after servicing? Had my Janome 15000 back from shop on Monday, used it today for the first time since it’s service and I have had oil dripping onto work area when I’ve changed thread and used threader! I have complained to the shop and they say this can happen and it’s a fine line between enough oils and over doing the oil!! They say it’s coming from the take up lever and to rub it away.....which I have now but just wondered if it was bad servicing or a normal occurrence?
Judy, Cornwall U.K.






Servicing of Janome 15000

Judy Jackson
 

Hi all
Has anyone had a problem with excess oil dripping onto embroidery after servicing? Had my Janome 15000 back from shop on Monday, used it today for the first time since it’s service and I have had oil dripping onto work area when I’ve changed thread and used threader! I have complained to the shop and they say this can happen and it’s a fine line between enough oils and over doing the oil!! They say it’s coming from the take up lever and to rub it away.....which I have now but just wondered if it was bad servicing or a normal occurrence?
Judy, Cornwall U.K.


Re: Lap Seam foot

berninahusq
 


Re: Lap Seam foot

Judy
 

Thank you, Tracy.  I have the Janome 15000 Quiltmaker.  I also have the foot book, but I guess I didn’t know what I was looking for.  Are the feet you found generic or Janome?


Re: Lap Seam foot

Tracy
 

Judy-

Yes, there are felling feet for low shank and high shank machines.  I don't know what model Janome you want one for.  I found them on the sewingpartsonline website.  They have them for different widths of flat felled seams.

 

If you have the Foot Book App on an apple device- you should be able to find the feet also.

Tracy in Nashville, TN

Martha Pullen Licensed Educator


Re: Foot pedal Janome 15000

favymtz
 

I frequently use the 12000 foot pedal for the 15000, because when I take my machine to class I don't like to carry the big bulky one.
(I should say, when we used to go to classes!)
It works fine.
--
Favymtz


Lap Seam foot

Judy
 

Does Janome have an equivalent foot to Bernina’s #71 Lap seam foot?  I have seen the lap seam for used to sew on binding and would like to find a Janome foot like it.
thank you.


Re: suggested stitch?

June E Hudspeth
 

Hi Kathy:

 

WOW oh WOW!!!!!!!!!!!!!!!!!!!!!

 

This is amazing.  Love this technique to pieces (big smile).

 

Thank you so much for sharing!!!!!!!!!!!!!!!!!!!!

 

June

 

From: onlinesewing-janome@groups.io <onlinesewing-janome@groups.io> On Behalf Of Kathy Strabel
Sent: Thursday, April 22, 2021 5:04 PM
To: onlinesewing-janome@groups.io Notification <onlinesewing-janome@groups.io>
Subject: Re: [onlinesewing-janome] suggested stitch?

 

Joyce----Do you know how to do a binding?  Like on the edge of a quilt. It could be made from a separate piece of fabric that coordinates with your muslin fabric. Don't be put off if you don't feel you could do the mitered corners that are traditional. There is another way to bind a quilt that I have adopted that does not require mitering the corners. There is a very good video on You Tube that explains this super easy method.  Here is the link to the video:  https://www.youtube.com/watch?v=aJFiiACpKRA&t=358s

Good luck!

Kathy Strabel

 

On Thu, Apr 22, 2021 at 2:02 PM Joyce Daniel <mdaniel@...> wrote:

I have a beautiful piece of 2 sided slate blue musliny type fabric I’d like to use as a receiving blanket/nursing cover.

Any suggestions for a way to finish the raw edge?

It’s light weight and one sided, not sheer. I only have a yard so don’t really have any extra to practice with. Help??

Joyce in GA

 

We are all tourists, God is our travel agent

who has already identified our routes,

bookings, and destinations…..trust Him always

and enjoy the beautiful life He has given you.

Charlie Chaplin

 


 

--

Have a good one!
Kathy Strabel




Re: Foot pedal Janome 15000

Lyn Quine
 

I had the same problem with my 15000 foot pedal, I sent it back to Janome, and it was replaced under warranty, i had taken out the extended warranty, whilst I was waiting I used the foot pedal from my 6600P, it’s the same pedal as the 12000, I was glad when I got the replacement, only because it’s bigger under foot. 


Re: Foot pedal Janome 15000

Helene B
 

Thank you


On Apr 23, 2021, at 5:31 AM, Jim Stutsman via groups.io <onlinesewing@...> wrote:

It will work, but it won't attach to the bracket with the cutter on it. As long as you don't mind using the button to cut threads you should be fine.


Re: Foot pedal Janome 15000

Jim Stutsman
 

It will work, but it won't attach to the bracket with the cutter on it. As long as you don't mind using the button to cut threads you should be fine.


Re: suggested stitch?

Cat - N
 

If you are trying to preserve the maximum fabric size, since you only have one yard of it, you could do a 'mock serged edge' (not an official term...just my description) using the "Overedge Foot" (M, for the Janome 15000). 

https://www.janome.com/accessories/sewing-machine-feet/overedge-foot/

To mask the raw edge, you could use narrow ribbon...you could use a bit of glue stick to keep it in place for sewing.  You could add wider ribbon (lace, twill tape, etc.) and zigzag on the center of the ribbon with the ribbon placed with its center along the raw edge.  Again, you could use glue...or pins/clips...so it doesn't move. You could also do a 'scallop edge' if you have the stitch on your machine, or a 'rolled hem' if you have a foot for that. 

You can practice on some other scrap of fabric, and check out how the stitching looks on your real fabric after you've stitched an inch or so...in case you need to 'unsew' it for some other option.

- Cat (FL)


-----Original Message-----
From: Joyce Daniel <mdaniel@...>
To: onlinesewing-janome@groups.io
Sent: Tue, Apr 20, 2021 1:25 pm
Subject: [onlinesewing-janome] suggested stitch?

I have a beautiful piece of 2 sided slate blue musliny type fabric I’d like to use as a receiving blanket/nursing cover.
Any suggestions for a way to finish the raw edge?
It’s light weight and one sided, not sheer. I only have a yard so don’t really have any extra to practice with. Help??
Joyce in GA
 
We are all tourists, God is our travel agent
who has already identified our routes,
bookings, and destinations…..trust Him always
and enjoy the beautiful life He has given you.
Charlie Chaplin
 


Re: Foot pedal Janome 15000

Helene B
 

There is a foot pedal on sale on Amazon for the Janome 12000.would this work on my 15000? It take a long time for my dealer to get supplies from Janome.


On Apr 22, 2021, at 6:57 PM, Jim Stutsman via groups.io <onlinesewing@...> wrote:

This seems to be a chronic problem with the 15000 foot control. Many people, ourselves included, have had to replace it. Check with your dealer.


Re: Foot pedal Janome 15000

Jim Stutsman
 

This seems to be a chronic problem with the 15000 foot control. Many people, ourselves included, have had to replace it. Check with your dealer.


Re: suggested stitch?

Louise Truss
 

Can you use wooly nylon and serge the edges?


On Apr 22, 2021, at 5:02 PM, Joyce Daniel <mdaniel@...> wrote:



I have a beautiful piece of 2 sided slate blue musliny type fabric I’d like to use as a receiving blanket/nursing cover.

Any suggestions for a way to finish the raw edge?

It’s light weight and one sided, not sheer. I only have a yard so don’t really have any extra to practice with. Help??

Joyce in GA

 

We are all tourists, God is our travel agent

who has already identified our routes,

bookings, and destinations…..trust Him always

and enjoy the beautiful life He has given you.

Charlie Chaplin

 


Foot pedal Janome 15000

Helene B
 


I have a Janome 15000. Recently when I am sewing a picture of the foot petal comes up on the screen with a warning message and the machine stops. I prefer to use the foot petal to stop and start my machine. When this started I removed the little gizmo on the foot petal that cuts thread because I never use to see if that helps but it continues. When this happens I briefly disengage the foot petal from the machine then engage it again and the machine works again for a few minutes before it stops again with the same warning. Is this something I should be concerned about? It is very annoying.


Re: suggested stitch?

Kathy Strabel
 

Joyce----Do you know how to do a binding?  Like on the edge of a quilt. It could be made from a separate piece of fabric that coordinates with your muslin fabric. Don't be put off if you don't feel you could do the mitered corners that are traditional. There is another way to bind a quilt that I have adopted that does not require mitering the corners. There is a very good video on You Tube that explains this super easy method.  Here is the link to the video:  https://www.youtube.com/watch?v=aJFiiACpKRA&t=358s
Good luck!
Kathy Strabel

On Thu, Apr 22, 2021 at 2:02 PM Joyce Daniel <mdaniel@...> wrote:

I have a beautiful piece of 2 sided slate blue musliny type fabric I’d like to use as a receiving blanket/nursing cover.

Any suggestions for a way to finish the raw edge?

It’s light weight and one sided, not sheer. I only have a yard so don’t really have any extra to practice with. Help??

Joyce in GA

 

We are all tourists, God is our travel agent

who has already identified our routes,

bookings, and destinations…..trust Him always

and enjoy the beautiful life He has given you.

Charlie Chaplin

 



--
Have a good one!
Kathy Strabel





Re: RE18 Hoop

Lyn Quine
 

Just had a look on the Janome website, try this link, it says that it is compatible.  If it’s like the 15000 the RE18 hoop is on the second page of hoops at the bottom.

 https://www.janome.com/accessories/hoops/re18-hoop/i

401 - 800 of 28706