Date   

Re: hoop storage

vicki chrobak
 

I hang mine from a chain in the closet using those big spring type hoops.
-- 
Vicki Jo

Any one come up with a plastic container large enough to store the hoops? I haven’t used my hoops all that much, but the cardboard box in which they came is starting to show some wear. I really like the padded storage case for the embroidery unit – too bad the hoops didn’t come in a light-weight plastic box.

 

Vikki

  


Re: A word of caution

vicki chrobak
 

Hey Cheryl, it's Christmas. Maybe Santa hears our wishes, tee-hee).

--
Vicki Jo

Yes, I also forget the bobbin holder. It seems like with all the bells
and whistles this machine has, maybe they could come up with an
automatic bobbin holder and needle plate changer (ha ha). I would
prefer a really good looking guy who just stands in the corner until I
get done embroidering and then comes over and changes them for me while I
admire him. Is that too much to hope for?


Re: hoop storage

Donna Morton
 

The following link shows and explains what one of our customers did.  http://janomelife.wordpress.com/2011/11/17/wonderful-idea-for-the-horizon-mc12000-hoops/
 
Donna M
Canada
 

Sent: Saturday, December 24, 2011 1:17 PM
Subject: [janome12000] hoop storage
 
 

Any one come up with a plastic container large enough to store the hoops? I haven’t used my hoops all that much, but the cardboard box in which they came is starting to show some wear. I really like the padded storage case for the embroidery unit – too bad the hoops didn’t come in a light-weight plastic box.

Vikki

Houston, TX


hoop storage

Vikki Youngmeyer
 

 

Any one come up with a plastic container large enough to store the hoops? I haven’t used my hoops all that much, but the cardboard box in which they came is starting to show some wear. I really like the padded storage case for the embroidery unit – too bad the hoops didn’t come in a light-weight plastic box.

 

Vikki

Houston, TX


12000 hoops and Embird

lysiaau <n.schuster@...>
 

Thanks for all your help. The fault was mine, so simple. I didn't
move the arrow across on the machine to the larger designs, when
I did this the 230by230 was there. All I have to do is learn the machine.
Lysia


Re: A word of caution

Sherry Martin
 

Yes, I also forget the bobbin holder. It seems like with all the bells and whistles this machine has, maybe they could come up with an automatic bobbin holder and needle plate changer (ha ha). I would prefer a really good looking guy who just stands in the corner until I get done embroidering and then comes over and changes them for me while I admire him. Is that too much to hope for?

--- In janome12000@..., vicki chrobak <tulsajo1@...> wrote:

But for me, it's also a reminder for bobbin holder as well as plate.
If there is ANY room for a booboo, I can do it!

--
Vicki Jo

Actually, you don't HAVE to change that throat plate back after
embroidering. You can do straight stitching AND free motioning
stitching. It's a great feature if you're stitching on sheer or flimsy
fabric-less chance of getting sucked down into the bobbin area. The
fact that many stitches (actually, any that have width) are grayed out,
should be enough of an indication that the straight stitch throat plate
is in.



--- Injanome12000@... <mailto:janome12000%40yahoogroups.com>, vicki chrobak<tulsajo1@> wrote:

Cheryl, I found some cheap key rings/luggage tags with a label& labeled
1 "zigzag/regular", the other "straight stitch/embroidery". I hang the
appropriate one on Jim's metallic thread holder to remind me which
set-up I'm on.


Re: Embird and 12000

meowmie <meowmie@...>
 

Actually Sew-What pro (by Sands computing) also has the hoops for the Janome 12000 in it's software now, they just updated this past week to include the new hoops.
 
Jenn

From: Jim_Stutsman
To: janome12000@...
Sent: Friday, December 23, 2011 5:58 PM
Subject: [janome12000] Re: Embird and 12000

 
The JEF design format contains a field that indicates the hoop required to stitch the design. Embird, like all non-Janome software providers, will need to reverse-engineer the new JEF format to figure out all the codes. The machine will not accept designs with invalid codes, or codes for hoops that are smaller than the design. At the moment the only software that has all the 12000 hoops is StitchBuddy for the Mac.

You *might* be able to make a GR hoop design by using Embird to save it for the MA hoop on the 11000. Horizon Link will open those designs and will convert the hoop to GR. At that point you can send it to the machine.

--- In janome12000@..., "lysiaau" >
> I have Embird and I can set a 140by140 custom hoop and it shows
> on the machine but the 12000 wont recognise a custom hoop 230by230.
> Is there any other way to save designe to a stick as I only have
> Janome 10000 software.
> Lysia
>




Re: A word of caution

vicki chrobak
 

But  for me, it's also a reminder for bobbin holder as well as plate.  If there is ANY room for a booboo, I can do it!
-- 
Vicki Jo

Actually, you don't HAVE to change that throat plate back after 
embroidering.  You can do straight stitching AND free motioning 
stitching.  It's a great feature if you're stitching on sheer or flimsy 
fabric-less chance of getting sucked down into the bobbin area.  The 
fact that many stitches (actually, any that have width) are grayed out, 
should be enough of an indication that the straight stitch throat plate 
is in.



--- In janome12000@..., vicki chrobak  wrote:

>

> Cheryl, I found some cheap key rings/luggage tags with a label & labeled 

> 1  "zigzag/regular", the other "straight stitch/embroidery".  I hang the 

> appropriate one on Jim's metallic thread holder to remind me which 

> set-up I'm on.

> 


Re: A word of caution

janetpiekarski
 

Actually, you don't HAVE to change that throat plate back after embroidering. You can do straight stitching AND free motioning stitching. It's a great feature if you're stitching on sheer or flimsy fabric-less chance of getting sucked down into the bobbin area. The fact that many stitches (actually, any that have width) are grayed out, should be enough of an indication that the straight stitch throat plate is in.

--- In janome12000@..., vicki chrobak <tulsajo1@...> wrote:

Cheryl, I found some cheap key rings/luggage tags with a label & labeled
1 "zigzag/regular", the other "straight stitch/embroidery". I hang the
appropriate one on Jim's metallic thread holder to remind me which
set-up I'm on.

--
Vicki Jo



I went to hem a pair of pants this morning and discovered that I had
very few options to sew. Of course I went into panic mode and wrote a
nice long question for the forum to try to help me. I phoned a friend
to get a few short words to describe the free motion stitch - the
squiggle kind and SHE SOLVED my problem. In case this happens to any of
you REMEMBER that the needle/throat plate needs to be changed after
your are finished embroidery and want to do regular sewing. Now I can
hem those pants to wear for Christmas.



Again - a very Blessed and Happy Christmas to all.



Cheryl - Saskatoon, Saskatchewan Canada


Re: A word of caution

vicki chrobak
 

Cheryl, I found some cheap key rings/luggage tags with a label & labeled 1 "zigzag/regular", the other "straight stitch/embroidery". I hang the appropriate one on Jim's metallic thread holder to remind me which set-up I'm on.

--
Vicki Jo



I went to hem a pair of pants this morning and discovered that I had
very few options to sew. Of course I went into panic mode and wrote a
nice long question for the forum to try to help me. I phoned a friend
to get a few short words to describe the free motion stitch - the
squiggle kind and SHE SOLVED my problem. In case this happens to any of
you REMEMBER that the needle/throat plate needs to be changed after
your are finished embroidery and want to do regular sewing. Now I can
hem those pants to wear for Christmas.



Again - a very Blessed and Happy Christmas to all.



Cheryl - Saskatoon, Saskatchewan Canada


A word of caution

Cheryl Paul
 

Merry Christmas everyone!

I went to hem a pair of pants this morning and discovered that I had very few options to sew. Of course I went into panic mode and wrote a nice long question for the forum to try to help me. I phoned a friend to get a few short words to describe the free motion stitch - the squiggle kind and SHE SOLVED my problem. In case this happens to any of you REMEMBER that the needle/throat plate needs to be changed after your are finished embroidery and want to do regular sewing. Now I can hem those pants to wear for Christmas.

Again - a very Blessed and Happy Christmas to all.

Cheryl - Saskatoon, Saskatchewan Canada


Re: Embird and 12000

Judy <judyjanome@...>
 

Hi Jim and many thanks for the manual gift. I have the 5D professional software and I can convert and save to jef format with any of the 4 hoops in the Janome 12000 machine. The software is pricey but they try to include all the new machines and there hoops. I am assuming that if the correct machine (Janome 12000) and one of the 4 hoops as a choice, all necessary info would be transferred with the file. So far I have only converted one file and it did work. Busy with sewing for now. Happy holidays.

Sent from my iPhone


Re: 12000 manual

Pinguin
 

Hello Jim,
thanks a lot.
I have a Dutch manual, but it is nice to have the English version as PDF as well. It makes it easier to understand some of the conversations on the list as things are sometimes translated different than I would expect. (Example: Quiet mode is translated as Eco mode)

Recently Adobe made an app to read PDF's so there is an alternative to iBooks, allthough I like iBooks.

Gerda

Op 23-12-11 17:03, Jim_Stutsman schreef:

 

OK, here's your early Christmas present:
http://dl.dropbox.com/u/48356382/12000%20Manual.pdf

To put it on your iPad follow these steps:
1. If you don't have iBooks installed on the iPad, download it now from the App Store. It's free!

2. Open the link above in Safari on your iPad.

3. In the top right corner of the page look for a button labeled "Open in iBooks". If you don't see it tap the screen. Touch the button.

The instruction book will be opened in iBooks. It will be in the PDFs collection, but you can move it using the Edit button on the top right.

Enjoy and Merry Christmas!

--- In janome12000@..., "Vickie" wrote:
>
> Does anyone know of an on-line manual for the 12000? We are traveling and I meant to bring mine along to read, but forgot it! A PDF version would be awesome as I could put it on my iPad!!
>
> Thanks --Vickie
> Fort Davis, TX
>


Re: Embird and 12000

Marsha
 

Lysia,
 
I just tested this in Embird & machine recognized the design & displayed the 9.1 x 11.8" hoop when it opened the design.  Just make sure that you have "keep hoop settings, do not adjust hoop size according to settings in design file" checked at the bottom of the Embird Custom Hoop screen.  Uncheck the other 2 size adjust boxes that are right above that.
 
HTH,
 
Marsha


Re: 12000 manual

Liz
 

Jim, Thank you so much for this online Manual, now I have it on my iPad with your FootBook reference Book. It is so handy.
Christmas wishes to all. Liz in Australia


Re: Embird and 12000

Donna Morton
 

I save designs in the 200 X 200 hoop regardless of the size.  The design will be in the 230 X 230 hoop when you open it at the machine.  I’ve had no problems at all doing it this way.
 
Donna M
Canada
 

From: lysiaau
Sent: Friday, December 23, 2011 4:18 PM
Subject: [janome12000] Embird and 12000
 
 

I have Embird and I can set a 140by140 custom hoop and it shows
on the machine but the 12000 wont recognise a custom hoop 230by230.
Is there any other way to save designe to a stick as I only have
Janome 10000 software.
Lysia


Thank you Jim

lysiaau <n.schuster@...>
 

I am new to the 12000, but I'll follow your hints, and see what happens.
Lysia


Re: Embird and 12000

Jim_Stutsman <jim@...>
 

The JEF design format contains a field that indicates the hoop required to stitch the design. Embird, like all non-Janome software providers, will need to reverse-engineer the new JEF format to figure out all the codes. The machine will not accept designs with invalid codes, or codes for hoops that are smaller than the design. At the moment the only software that has all the 12000 hoops is StitchBuddy for the Mac.

You *might* be able to make a GR hoop design by using Embird to save it for the MA hoop on the 11000. Horizon Link will open those designs and will convert the hoop to GR. At that point you can send it to the machine.

--- In janome12000@..., "lysiaau" <n.schuster@...> wrote:

I have Embird and I can set a 140by140 custom hoop and it shows
on the machine but the 12000 wont recognise a custom hoop 230by230.
Is there any other way to save designe to a stick as I only have
Janome 10000 software.
Lysia


Embird and 12000

lysiaau <n.schuster@...>
 

I have Embird and I can set a 140by140 custom hoop and it shows
on the machine but the 12000 wont recognise a custom hoop 230by230.
Is there any other way to save designe to a stick as I only have
Janome 10000 software.
Lysia


Re: Another stupid question....

Jim_Stutsman <jim@...>
 

You start out with ONE copy of Digitizer, either 10000, Pro 1.0, 2.0, or 3.0. When you buy an upgrade, you update that SINGLE copy to the MBX version (4.0). During this process the old dongle MUST be present to verify legal ownership. It is then deactivated and the new dongle is "blessed" to enable the upgraded version. When all the dust settles you still have ONE copy of Digitizer, but it's the latest version.

You can, however, install Digitizer MBX on additional computers using the upgraded DVD. Yes, it's an upgrade, but the DVD contains the full version of the software. To use it on another computer, just move the dongle to that computer.

After the upgrade, the old dongle is useless and may be discarded (or recycled). Note to those who do not own Digitizer - there may be people putting older versions of Digitizer on eBay, Craig's List, etc. who do not understand the process. The old dongle will not work and if you buy one of these used Digitizers you will not be able to use it.

--- In janome12000@..., "gracelubold" <glubold@...> wrote:

Hi, I just got the MBX upgrade. My first question is this. Does installing the upgrade "kill" the 3.0 upgrade dongle? Can the upgrade be installed without the 3.0 dongle to protect it. I would like to be able to use it on another computer at my cottage. If the question has already been answered, I apologize.... I found no reference in the message list. Thanks, Grace