|
Re: Apps on 14000
You won’t be able to use the wifi functions because the 14 isn’t wifi enabled. But I used the acudesign with dropbox and transferred to USB from Dropbox on my PC. You can get a USB that fits
|
You won’t be able to use the wifi functions because the 14 isn’t wifi enabled. But I used the acudesign with dropbox and transferred to USB from Dropbox on my PC. You can get a USB that fits
|
By
Lyn Quine
·
#25698
·
|
|
Re: Question about bobbins
I have my bobbin warning set to 0.5, from when I get the first warning to it stopping when in embroidery mode, I know I have around 3000 stitches. If it stops before the end of the design I gauge
|
I have my bobbin warning set to 0.5, from when I get the first warning to it stopping when in embroidery mode, I know I have around 3000 stitches. If it stops before the end of the design I gauge
|
By
Lyn Quine
·
#25697
·
|
|
Re: Apps on 14000
Thank you! That’s good to know – saves me money. 😊 I already have a USB flash drive that I use to load embroidery designs to my small Brother machine. Glad I can use the same process.
|
Thank you! That’s good to know – saves me money. 😊 I already have a USB flash drive that I use to load embroidery designs to my small Brother machine. Glad I can use the same process.
|
By
terryj@...
·
#25696
·
|
|
Re: Apps on 14000
You do NOT need an iPad with the 14000. Because the 14000 does not have WiFi, there is no way to send designs directly to the machine from an iPad. You can, however, get a USB flash drive that
|
You do NOT need an iPad with the 14000. Because the 14000 does not have WiFi, there is no way to send designs directly to the machine from an iPad. You can, however, get a USB flash drive that
|
By
Jim Stutsman
·
#25695
·
|
|
Question about bobbins
Any idea about how much thread is left on bobbin when you get the warning that there may not be enough thread left to finish design. I’d like to know approximately how many stitches before I run
|
Any idea about how much thread is left on bobbin when you get the warning that there may not be enough thread left to finish design. I’d like to know approximately how many stitches before I run
|
By
bhoryn
·
#25694
·
|
|
Re: Janome 15000 foot pedal
I had the same problem with the foot pedal, too. It started after I turned the machine back on the next day, after it had been sewing perfectly, so nothing at all had happened to cause any issue. No
|
I had the same problem with the foot pedal, too. It started after I turned the machine back on the next day, after it had been sewing perfectly, so nothing at all had happened to cause any issue. No
|
By
Cat - N
·
#25693
·
|
|
Re: Another question
Hi, Beth! It sounds like you are in "Murphy's Law" mode, but hopefully it will soon be over. Getting the bobbin case installed correctly can be a bit fiddly, but once installed correctly, next time
|
Hi, Beth! It sounds like you are in "Murphy's Law" mode, but hopefully it will soon be over. Getting the bobbin case installed correctly can be a bit fiddly, but once installed correctly, next time
|
By
Cat - N
·
#25692
·
|
|
Apps on 14000
Hi all - I'm new to the forum. My MC 14000 is shipping to me this week (I'm very excited!). I've read that except for wifi and some stitches and embroidery designs, it functions just like the 15000.
|
Hi all - I'm new to the forum. My MC 14000 is shipping to me this week (I'm very excited!). I've read that except for wifi and some stitches and embroidery designs, it functions just like the 15000.
|
By
terryj@...
·
#25691
·
|
|
Re: Janome 15000 foot pedal
I had that issue. It wasn't the pedal but the power supply inside the machine that powers the foot pedal. It sewed fine with the button. I think the bill was about $280 for fixing it. I tested it by
|
I had that issue. It wasn't the pedal but the power supply inside the machine that powers the foot pedal. It sewed fine with the button. I think the bill was about $280 for fixing it. I tested it by
|
By
Jean Olson
·
#25690
·
|
|
Re: Another question
Hello Cheryl
Thanks for the encouragement. I did have a little trouble getting the bobbin case in far enough so that the needle plate was wobbly but I persevered and finally got it in flush. Spent
|
Hello Cheryl
Thanks for the encouragement. I did have a little trouble getting the bobbin case in far enough so that the needle plate was wobbly but I persevered and finally got it in flush. Spent
|
By
bhoryn
·
#25689
·
|
|
Re: Another question
Thanks for the idea of using the binder clip as a thread guide. I will have to try the smaller spool holder insert. I know it is designed to work with the taller spools.
Pixey
|
Thanks for the idea of using the binder clip as a thread guide. I will have to try the smaller spool holder insert. I know it is designed to work with the taller spools.
Pixey
|
By
Pixey
·
#25688
·
|
|
Re: Another question
There are actually 2 versions of the Superior one...a fancy one with multiple thread positions (which I don’t have) and a simpler one that is basically a heavy cast iron base, spool pin, and a tall
|
There are actually 2 versions of the Superior one...a fancy one with multiple thread positions (which I don’t have) and a simpler one that is basically a heavy cast iron base, spool pin, and a tall
|
By
Pixey
·
#25687
·
|
|
Re: Janome 15000 foot pedal
Have you tried sewing without the foot pedal and using the button on the machine. If that works, then the issue is probably with the pedal or the cable itself. If it cuts out when using the button on
|
Have you tried sewing without the foot pedal and using the button on the machine. If that works, then the issue is probably with the pedal or the cable itself. If it cuts out when using the button on
|
By
Vikki Youngmeyer
·
#25686
·
|
|
Re: Janome 15000 foot pedal
oh no, i have been getting the same message since my machine came back from Janome last year. i have to unplug and replug the pedal, it is much more frequently now. it was bad enough when i thought
|
oh no, i have been getting the same message since my machine came back from Janome last year. i have to unplug and replug the pedal, it is much more frequently now. it was bad enough when i thought
|
By
Nyssa Lanzafame
·
#25685
·
|
|
Re: Acuedit not getting new designs :(
Oh, and I had also tried the 'copy to Acuedit' option through Chrome, it did not work either, likely was that the file information had simply not been allowed to download.
|
Oh, and I had also tried the 'copy to Acuedit' option through Chrome, it did not work either, likely was that the file information had simply not been allowed to download.
|
By
Nyssa Lanzafame
·
#25684
·
|
|
Re: Acuedit not getting new designs :(
Jim,
thank you, i did figure out shortly after I sent in my question (but it was not live to edit) that the browser was the issue. In another post you had suggested someone save to stitch buddy which
|
Jim,
thank you, i did figure out shortly after I sent in my question (but it was not live to edit) that the browser was the issue. In another post you had suggested someone save to stitch buddy which
|
By
Nyssa Lanzafame
·
#25683
·
|
|
Re: Janome 15000 foot pedal
Hi Jim, I’ve tried the 12000 foot pedal, it worked ok so it doesn’t look like it’s the socket on the machine, so husband is going to have a closer look at the 15000 pedal, he’s wondering if
|
Hi Jim, I’ve tried the 12000 foot pedal, it worked ok so it doesn’t look like it’s the socket on the machine, so husband is going to have a closer look at the 15000 pedal, he’s wondering if
|
By
Lyn Quine
·
#25682
·
|
|
Re: Another question
Bhoryn, Can you sign so we know your name, unless it is Bhoryn.
Pixey mentions the horizontal spool holder in a post. There is an attachment for a 2 or 5 spool holder that attaches to the back of
|
Bhoryn, Can you sign so we know your name, unless it is Bhoryn.
Pixey mentions the horizontal spool holder in a post. There is an attachment for a 2 or 5 spool holder that attaches to the back of
|
By
Cheryl Paul
·
#25681
·
|
|
Re: Acuedit not getting new designs :(
You had me stumped until I realized you were not using the Safari browser built into iPad. I don't know what browser it is, but it is not helping you by offering the "Open in" option. As Apple is
|
You had me stumped until I realized you were not using the Safari browser built into iPad. I don't know what browser it is, but it is not helping you by offering the "Open in" option. As Apple is
|
By
Jim Stutsman
·
#25680
·
|
|
Re: Another question
Pixey---Depending on the size of spool you use, the horizontal spool pin can work well if you use the very small spool pin "disk". It does not look like the other, flat spool pin disks. It is about
|
Pixey---Depending on the size of spool you use, the horizontal spool pin can work well if you use the very small spool pin "disk". It does not look like the other, flat spool pin disks. It is about
|
By
Kathy Strabel
·
#25679
·
|
