a friend passed on some never used presser feet for her older Jan0me40 — maybe an 8000? They do not snap onto the shank of my Janome 12000. They are too narrow. Does it make sense to purchase a

I've bought bobbins in the UK, both with and without the J, and and several boxes of coloured ones from China (useful for different threads - cotton, polyester, embroidery, specific bobbin thread etc,

My 12000 doesn't have any problem with the pink, blue, or clear Janome bobbins. However, it does not like the generic class 15 plastic bobbins I sometimes use in my old Kenmore, which actually prefers

I have noticed lately I have had issues with the pink bobbins breaking when I embroider. I self wind them with Janome bobbin thread. My clear bobbins I self wind with other brands of bobbin thread for

Wow .... I use them in both my 15000 and 9900 and they are great. Wonder what was different about that pesky 12000. I’m sorry you had a problem with the pink and blue. Heather

I bought some of the blue and the pink Janome bobbins. They were the rubber infused kind. I could not use them in my 12000. It's like the rubber in them was causing them to stick to the bobbin case

I love that Janome has three colors of bobbins easily available. Wish they had a few more. I wind piecing thread on blue bobbins, embroidery bobbin thread on the pink ones and garment/other bobbin

I have both red and blue bobbins and they both have the J on them. I got them at Amazon. Marilyn Sent from my ipad

The bobbins with rubber infusion don't flex any more than the plain ones, but I can feel a difference when sliding a finger over the surface of the bobbin. The rubber-infused ones are not quite a

I bought a box of pink Janome bobbins and a box of blue supposedly so I could tell apart the cotton and poly thread (but you can really tell just by looking at the thread). Anyway, the pink have the

The bobbins marked with 'B' are genuine Janome, but were made before they started infusing the plastic with rubber. There may be some J bobbins like that as well. I don't know if the J stamp was done

I did read the thread about the bobbins with J on them so I started looking through mine. I have a million. Most are blank but I do have some that look similar to the J but they have a B on them. The

Once you push the START button the machine is being controlled by the embroidery design, so this is probably due to a stop that is embedded in the design. You didn't say which machine this is on, but

Set up a new design and began stitching, but the stitching stops after about 10 stitches, then I need to push the start button again.. no message on the screen to indicated why..any suggestions?

I don't have a cabinet for my machine. I use a BEKANT desk from IKEA. It's part of their office furniture range and can be raised and lowered as needed. I bought the largest size 160cm x 80cm (72

Thanks for all the suggestion, very helpful.

Your dealer should be a big help. When I got my 15000, I bought its table at the same time from the dealer & have been so pleased that a later decision wasn't required. Good luck with finding that

An IP address is four numbers, separated by dots. Your machine's IP must have the same first 3 numbers as the computer's IP in order to be found. Some routers support a "guest" network, which allows

I ordered the Sylvia Design Model 2600 from Sewing Machines Plus. I LOVE it! It fits the big machine perfectly, is very easy to raise and lower, the height is adjustable, and I got the optional

I have had the Horn Superior cabinet for a few years now. When I bought it I was told it was the only Horn that fitted a 15000. I have been very pleased with it. Betty