|
Re: S9 machine
Pixey
My S9 is new and I have not yet tried to do the WiFi setup yet. However, the file structure on the USB drives appears to be the same as the 15000. When you first format the USB in the sewing machine, it will create the EMB and EMBF folder structure. Then you will need to put individuals designs in the EMBF folder but you can create other folders under EMB and put designs in them as well. If you look at the messages archive on the list site and search “folder” it will bring up relevant messages like this one... https://groups.io/g/onlinesewing-janome/message/4020?p=,,,20,0,0,0::relevance,,Folder,20,2,0,7844197 Hope this helps, Pixey On Dec 16, 2018, at 7:58 AM, DIANNE COOPER <ditiques@...> wrote:
|
|
|
|
Re: S9 machine
See page 158 in the instruction book. This site has pictures of the process as well: http://www.threadridinghood.com/wordpress/the-sewing-diaries-embroidery-edition-week-1/
Perhaps other S9 owners can be of assistance. |
|
|
|
S9 machine
DIANNE COOPER
I have the S9 Janome and wonder how to use the wi fi and on the usb connection, where on the machine did it save the file? no info in the manual.
|
|
|
|
Re: You guys are fabulous and so appreciated
Kathy
I agree! I don’t post much, but love all the information and help that you provide. Merry Christmas and Happy New Year.
Kathy Formally Texas, now Florida |
|
|
|
You guys are fabulous and so appreciated
Merry, Merry Christmas and Happy Holidays to all. Jim, you and Diane, are amazing!!! You take such good care of us. Thank you for the beautiful wreath pattern. I love it. Thank you soooooo much!!!!!!!!!!!!!!!! Donna Strode |
|
|
|
Re: needle plate message setting up for embroidery
Kaye Lessard
There are 2 needleplates that come with 15000! Regular sewing- bigger hole for zigzag and the straight stitch plate- one small hole!
Yes you can embroidery with regular plate but Stitches better when using straight stitch plate!! Kaye in la |
|
|
|
Re: needle plate message setting up for embroidery
It sounds like the needle plate sensor may need adjusting. However you should check that area in the back right corner of where the needle plate sits. Clean out lint or debris, if any. Also make sure you press the circle on the plate when installing. It requires a bit of muscle to seat it fully.
|
|
|
|
needle plate message setting up for embroidery
First embroidery project begun on my new-to-me 15,000-- followed the directions in manual to get ready and used designs in the machine. I changed the needle plate to single needle and got message on screen telling me wrong plate is installed. Took out and reinserted several times, turned machine off and on, re-read directions, substituted my 12,000 single needle plate, and same message appears. Frustrated, just used the regular sewingplate and embroidered a project which turned out OK.
Does this problem have a 'at home' solution? Closest Janome dealer is 5 hour drive one way. (not a minute of exaggeration). Is it OK to continue to use the sewing plate for embroidery or was I very lucky my fairy godmother was watching over me for this first project? approx 33,000 stitches. It was updated by previous owner to Quiltmaker version 3.00. Is there an archive of FAQ's? Thanks in advance. Chris |
|
|
|
Re: Digitizer V5
favymtz
Jim, V5 will handle the icons, BUT you’re correct that what happened is the most recent software installed that also had that ability to show icons broke the MBX ability. It happened to me too when I ran a trial of Sewiconz. The only fix is to notify JAI support and they can work with you and even possibly call in Wilcom to assist. Some changes to the Run and Command functions of your computer need to be reset. At one time I uploaded the instructions to the old 12 and 15000 Yahoo! Group, but they didn’t get saved when the group moved over to.io online sewing, and unfortunately I can’t find my file either. I’d love to be able to help, sorry! Favymtz |
|
|
|
Re: Digitizer V5
Caroline Wright
Thank you. I will contact them. My dealer called me back and said they were told the update had not been released yet and they would let me know when it was. Has anyone on here been able to get it and if so can it be shared or is it specific to only one machine?
toggle quoted message
Show quoted text
On Dec 14, 2018, at 1:39 PM, juliadlf.ny@... wrote:
|
|
|
|
Re: 15000 quiltmaker update
Virginia
If you mean for the Horizon Link yes zjanome can help. I had to contact them for that and the code for the ipad apps for my 15000. Sent from my Sprint Samsung Galaxy S7. -------- Original message -------- From: "Caroline Wright via Groups.Io" <grannygeek4@...> Date: 12/14/18 1:30 PM (GMT-05:00) To: onlinesewing-janome@groups.io Subject: Re: [onlinesewing-janome] 15000 quiltmaker update Does anyone know if Janome would send the link directly to me if I contact them? And, thanks for your help. Carol
|
|
|
|
Re: Digitizer V5
juliadlf.ny@...
If you haven't figured out the issue, maybe try contacting Janome in N.J. for technical assistance. I've used them and they are very helpful.Not sure if Terry is still there but worth
contacting them either by phone or email. 
|
|
|
|
Re: 15000 quiltmaker update
Caroline Wright
I called my dealer this morning and was told that they had never heard of this and the person I spoke with said she had attended the training. She did say she would call around and get back to me.
toggle quoted message
Show quoted text
Does anyone know if Janome would send the link directly to me if I contact them? And, thanks for your help. Carol On Dec 13, 2018, at 11:04 PM, Pixey via Groups.Io <pixeyam@...> wrote:
|
|
|
|
Re: S9 WiFi
The WiFi allows you to connect an iPad to the machine using apps like AcuEdit and AcuDesign. You can also use it to connect your computer to the machine as an alternative to USB.
|
|
|
|
Re: 15000 quiltmaker update
Pixey
Also, after you get the link and download the new version, be sure and keep a backed up copy of what you downloaded. This is because the link will go away after a while and if you need to reload it on a new or second machine, you will want to have a copy.
toggle quoted message
Show quoted text
Pixey On Dec 13, 2018, at 7:44 PM, Caroline Wright via Groups.Io <grannygeek4@...> wrote:
|
|
|
|
S9 WiFi
DIANNE COOPER
I have the S9 and wonder how do you use the WiFi??? |
|
|
|
Re: 15000 quiltmaker update
If your dealer did the update to the machine, then you are in the US or Canada. In those regions the dealer is responsible for sending your email to Janome, who will in turn send you a link to download the 1.3 update to Horizon Link Suite. This normally happens quickly *IF* your dealer did that. Check with your dealer to make sure.
|
|
|
|
15000 quiltmaker update
Caroline Wright
I just had my Janome 15000 updated today to quiltmaker version. Is there also an update for the software Horizon Link Suite 1.2 that I have on my PC? I keep seeing a reference to 1.3?
Thanks Caroline |
|
|
|
Re: Digitizer V5
Cheryl Alm
I have the problem with the icons as welll and have no other programs installed believe this started with one of the Windows updates in late summer. Very frustrating. Keep hoping there will be an update for V 5 to address this issue.
toggle quoted message
Show quoted text
|
|
|
|
Re: Digitizer V5
hesterj19@att.net <hesterj19@...>
Thanks Jim-- V5 has an online manual that gives pretty specific directions on how to make the thumbnails show, and I've followed them but the thumbnails still don't show. For several years I've had Embird loaded along with Digitizer and it all worked fine, till it didn't. I uninstalled Embird in hopes that would fix the problem, but it didn't. Now I'm wondering if my Buzz Tools upgrade is what messed up everything. Maybe someone on the list has had the same problem and can share how they fixed it......Thank you again for replying to my plea for help!
|
|
|