On your machine, under the Set, "Embroidery" Mode settings, scroll until you get to the Thread Cutting page. Click the Advanced button. There are options to Turn Off cutting at color change and end of

When I have bulky items I either use straight pins or clips to keep them out of the way. Sent from Mail for Windows 10

FIt is set to One Stitch Stop but I think that is only for the beginning. That part works fine. My problem is at the end of the stitching. Nothing I've tried so far stops so I can pull the bobbin

On the machine can you go into settings and change the embroidery setting to the One Stitch stop?

Has anyone ever used a 15000 to embroider on the belly of an Embroider Buddy elephant? Other than the ball cap hoop, the smallest hoop I have is a SQ14 (140 cm x140 cm), so I have to hoop sticky-back

ThT is it thank you so much Sent from my iPad

This is a very stupid question, I have always connected my machine to my computer using Wifi and have transferred all my designs that way. I am going to take a class and have to transfer my designs

I tried it both ways and it cut the thread both times.

Hi Liz, The book is called Measuring made Easy with the Two Easy Tape and Inseam Companion by Lorraine Henry The address in the back of the book is: LH Enterprises 9590 Via

Could it have to do with turningimg the tie off trim option

It's called "Measuring Made Easy" the tape is the "Two Easy Tape" by Lorraine Henry. --- Kathleen Chevalier western Pennsylvania, USA Sent: Monday, September 4, 2017 7:36 AM To:

I forgot to put that I am using Digitizer 5 which is where I need the help...not with my 12000. I want the embroidery function to stop at the end of a segment so I can pull the thread to the

I am unsure if I am using the right term. I am quilting on my 12000 and want to pull the thread up to the front at the end of a color like you can do at the beginning. I've tried using the scissors

I am looking for a specific center zero measuring tape. It included a booklet that on the front showed a picture of pant legs that was a measuring tape, this was not a long arm measuring tape. It was

I have an Elna 920. My dealer says it is close to the Janome 15000. My threader hasn't worked for a long time either, and was wondering if Elna was going to offer the same package, Sent from my iPad

Deb in CA what dealer in CA? Andrea

I haven't looked at it on the Janome site, but several posts on this group say it is the same as the 15000 except without the Wi-Fi.

As long as I can use the RE18 hoop and the accufil hoop, I don't see why updates would matter.

I've been following this thread for a while. My threader doesn't seem to work anymore, although I've worked around it. But I have found out that the dealer where I bought my machine 2+ years ago is no

You may want to check that out.. The 14,000 is not the same as the 15,000. go to Janome.com and they have a comparison chart on there.