Will the Apple I Pad 7th generation work with the Janome 15000?

Elizabeth, you have convinced me to get the ap! I am one of the few people in this world that do not have access to decent internet😔. But fiber is being installed in my development as we speak

Dear new JANOME 15000 owner, The best gift you can give yourself & your 15000, is to purchase the " MY15000" App Rated 5 stars, created by Jim Stutsman and Diane Stutsman It is

Every time the machine is turned on it runs a self-test. This message comes up when the test fails, but you have no way of knowing what phase failed or what caused the problem. Usually it has to do

Thank you, I promise to learn this wonderful machine my friend left me. It really is amazing, just like she was!

After three week in shop for this problem it returned the second time I plugged in and turned it on. Please help. Thanks

Just a thought: there are three ways to raise the presser foot. Could something with the knee lift be causing this. Try putting the knee lift in and raising and lowering the presser foot with that,

After 3 weeks in shop for this problem the second time I plugged it in and turned it on. I have tried several times to follow the screen it is not resolved. Thanks for any help.

Glad you found it Cheryl! And I’m especially glad you searched for it, that’s why I didn’t say where to change it! Sometimes it’s preferable to not have a design grouped, sometimes it is,

Everyone encounters this sooner or later. You have the single-hole needle plate installed. Change back to the regular plate and the other stitches will return.

I am unable to get anything but 1 page of utility stitches and 1 page of quilt stitches. This machine is new to me, friend passed and left it to me. I have read the manual and I'm lost! MC15000. It

Cheryl, when my son played hockey I made skate rags for the kids every year. I used an old hockey player motif from Janome (I think) and put the kids name and number on the towel. Easy to embroider

Thanks Favy, I didn’t realize that we had the choice of loading designs into the software “ungrouped”. I just thought that it was a “new” feature and that we needed to ungroup once we had

Since this is a new machine for you, the problem could be due to several things. If the bobbin gets put in backward it will quickly pull out of the bobbin tension and pull up to the top. If you are

Hello, I wanted to follow up on my previous question regarding the error message. I found the bobbin had a bunch of loose thread on it. The machine is working again but I have a lot of bobbin thread

Your explanation is exactly correct. The design needs to be grouped all together so that the tool can work properly. Also note In the Layout tool you have a choice if you want designs to be grouped

Hello, my brand new Janome 500e has an error message. this is my first time using this new machine. The yellow bar, error message in the window is: Raise Presser Foot and Needle Bar, then turn

Thanks, Jim!

We've been out of the business now for 8 years (Wow - seems more like 8 months!), and I have slept since we closed. I seem to recall the MBX 4.5 was not a free upgrade to MBX 4.0. Digitizer updates

Thank you so much! I don't know if that will work with what I'm doing, but if not, I can definitely use the information on some other projects.