I am a mere UK male, struggling with embroidery machines, but seem to have managed to install MBX ok and can transfer designs from laptop to 12000 without trouble, but I have just purchased a large

The problem is almost certainly in the folders. When you first insert a USB flash drive into the 12000, it creates a folder called EMB. Inside that is another folder called EmbF. Your designs must be

your baby projects are cute. where did you get the pattern for the booties? did you use woolly nylon around the edge of the blanket? they are so cute

Ok by no means am I dumb but this software / machine is so not intuitive. I'm struggling yet again trying to get my designs to the machine on the USB. Is is now maddening! I use true sizer and now

Digitizing software for the Mac has been around for a very long time. Lindee Goodall used Punto for digitizing all of her fabulous Cactus Punch designs - on a Mac. Any Mac with an Intel processor

Hi Jim, At my dealer's today, she had a minute to spare and said, "I can tell you this now, because it is official. Digitizing is coming soon for the Apple computer." I was surprised that I forgot

I attended a training session on Janome 12000 a few weeks ago and my dealer told us to always have the presser foot down when we use the threader. I think that engages the tension on the top thread

You'll need magnification and a lot of patience. The threader is a tiny hook that passes through the eye of the needle. To do this it has to be very thin, which makes it very fragile. There are

Wow saw your photos very nice. Question on one which font did you use? I posted it under the photo. TIA!

Hi, When I first used the threader (for a few times), it was ok. Now I have not been able to get the threader to thread the needle. I think it may be a tiny bit out of alignment. Is there an easy way

Thanks so much Anne!!! Wilcox true sizer I come! Sent from my iPhone Nancy W

T.G.I.F.! I just posted photos of a recent baby shower gift, and a couple of Mother's Day gifts (in the Chris K. folder). I'm not a quilter but I'm loving the bigger hoops on my new machine. I do

to lower the pressure foot. Dealer had me put Machine in sewing mode, remove emb. plate and put in sewing plate. Take a few stiches then reverse the process then the machine worked perfectly. It has

Wilcom TrueSizer is from the same people who brought us Digitizer MBX. It's very good.

Have you enlarged the mouse cursor in Windows to make ite easier to see? That's the only way that I could see the mouse covering the measurements. Another option would be to temporarily place a

You have the straight stitch plate on. Change to the other plate and all will be well.

Jim you're a doll and lifesaver! Thank you. I'll look at the 3 you mentioned. Do you know what the free ones are that are good? Sent from my iPhone Nancy W

Hi I have probably done something silly but I pressed the duel feed button which greyed out all but the first four stitch types. After pressing the duel feed key again all but the same stitch keys

Hi Jim I am trying to measure in Digi MBX and my pointer makes a small ruler and covers the measurement. Can you tell me what I can do so that the little white box shows me what I need, instead of

You cana sew with the embroidery unit attached but it MUST be closed or the machine will not sew and will tell you to close the arm. It's so cute:this machine has attitude!