|
Madeira Rayon
I have the 12000 and would like the thread to read out the Madeira Rayon numbers. I see the choices for poly threads, but not rayon and the numbers are very different. Anybody found a solution for
|
I have the 12000 and would like the thread to read out the Madeira Rayon numbers. I see the choices for poly threads, but not rayon and the numbers are very different. Anybody found a solution for
|
By
rosematt11@ymail.com
·
#8179
·
|
|
Re: About updating to 15000
Digizter for sure- does a lot more and easier to use - I have both
Kaye in la
Sent from my iPhone
|
Digizter for sure- does a lot more and easier to use - I have both
Kaye in la
Sent from my iPhone
|
By
Kaye Lessard
·
#8177
·
|
|
Re: Breaking thread and thread nesting
What you have described are classic symptoms of damage to the hook race. Take off the needle plate, remove the bobbin case and use a magnifying glass to look at the edge of the metal "basket" that the
|
What you have described are classic symptoms of damage to the hook race. Take off the needle plate, remove the bobbin case and use a magnifying glass to look at the edge of the metal "basket" that the
|
By
Jim Stutsman
·
#8176
·
|
|
Re: circular attachment
No, it won't work. The circular stitching attachment works by snapping in place of the bobbin cover. The bobbin cover for the 15000 is not as wide as the one on the 12000, so anything that replaces
|
No, it won't work. The circular stitching attachment works by snapping in place of the bobbin cover. The bobbin cover for the 15000 is not as wide as the one on the 12000, so anything that replaces
|
By
Jim Stutsman
·
#8175
·
|
|
Re: acufil 12000
When you enter the size of your quilt you enter the actual size do not add5 inches to the dimensions. The 5 inches on all sides of yourbacking-batting that you add before you start to quilt your
|
When you enter the size of your quilt you enter the actual size do not add5 inches to the dimensions. The 5 inches on all sides of yourbacking-batting that you add before you start to quilt your
|
By
VLS
·
#8178
·
|
|
Re: Artistic suite v Janome/Wilcom digitising suite. 4 Gail
I'm not sure if you are called Gail or Molly or Chloe, but in answer to the question you posed, go for the program that is written specifically for Janome machines.
I looked at the Artistic Sewing
|
I'm not sure if you are called Gail or Molly or Chloe, but in answer to the question you posed, go for the program that is written specifically for Janome machines.
I looked at the Artistic Sewing
|
By
maggie cooper
·
#8171
·
|
|
Re: acufil 12000 two more questions
Judy: buy Jim’s and Diane’s instructional DVDs for the 12000. They are superior to anything/everything else available.
-----
Lorelei Gustafson
lore@...
|
Judy: buy Jim’s and Diane’s instructional DVDs for the 12000. They are superior to anything/everything else available.
-----
Lorelei Gustafson
lore@...
|
By
Lorelei Gustafson <lore@...>
·
#8170
·
|
|
Re: Color changes
I'm new to Janome and the first design I stitched, I didn't pay attention to the color bars, and when the machine stopped I just assumed the color needed changing. It really was kind of comical, and
|
I'm new to Janome and the first design I stitched, I didn't pay attention to the color bars, and when the machine stopped I just assumed the color needed changing. It really was kind of comical, and
|
By
Sue Raabe <susies.stitches@...>
·
#8168
·
|
|
Re: acufil 12000
The instructions for multiple design layout says in step one to enter the overall size of embroidery area. Is this the finished size of the quilt or are you supposed to add a 5 inch margin all around
|
The instructions for multiple design layout says in step one to enter the overall size of embroidery area. Is this the finished size of the quilt or are you supposed to add a 5 inch margin all around
|
By
Judy Albert
·
#8172
·
|
|
Re: Show Madeira thread colors
Rose,
go to the “Set” menu on your 12000 & press the machine embroiderybutton @ the top (the one with blue on it). Then use the arrows at thebottom to scroll through the pages til you come to
|
Rose,
go to the “Set” menu on your 12000 & press the machine embroiderybutton @ the top (the one with blue on it). Then use the arrows at thebottom to scroll through the pages til you come to
|
By
Marsha
·
#8169
·
|
|
Re: circular attachment
Jim, I bought a circular stitching attachment today – and it’s P/N 200-304-003. It did not say what machine it would fit, but while at my dealer’s we put it on a 12000 machine and it fit fine
|
Jim, I bought a circular stitching attachment today – and it’s P/N 200-304-003. It did not say what machine it would fit, but while at my dealer’s we put it on a 12000 machine and it fit fine
|
By
Julie
·
#8167
·
|
|
Breaking thread and thread nesting
Jim... Happy New Year... I have a question I'm having trouble with my 12000. I had 14,000 stitches it worked great then about 12,000. The Thread starts breaking and then I get nestes
in the bobbins. I
|
Jim... Happy New Year... I have a question I'm having trouble with my 12000. I had 14,000 stitches it worked great then about 12,000. The Thread starts breaking and then I get nestes
in the bobbins. I
|
By
Barbara
·
#8174
·
|
|
Re: acufil 12000 two more questions
There is no specific purpose of the "stipple names " other than for the measurements to fit inside of the correct hoop. Not sure what you mean about the page3 designs. If you are referring to the
|
There is no specific purpose of the "stipple names " other than for the measurements to fit inside of the correct hoop. Not sure what you mean about the page3 designs. If you are referring to the
|
By
Virginia
·
#8173
·
|
|
Re: About updating to 15000
Should I buy the artistic suite or digitizer- is there a big difference?
Sent from Yahoo Mail on Android
|
Should I buy the artistic suite or digitizer- is there a big difference?
Sent from Yahoo Mail on Android
|
By
gail janczak
·
#8166
·
|
|
Re: a digitizer?
As a professional embroiderer, I often "farm out" my digitizing for faster service. I use anydigitizing.com. Exceptional service and top quality digitizing. Less than 24 hrs. on any
|
As a professional embroiderer, I often "farm out" my digitizing for faster service. I use anydigitizing.com. Exceptional service and top quality digitizing. Less than 24 hrs. on any
|
By
Tony Coley
·
#8165
·
|
|
Re: acufil 12000 two more questions
What is the significance of the stipple names, e.g. 100x100.jef? Can you use any one of the various stipple designs or are these specific sizes that somehow relate to the size of the computed acufil
|
What is the significance of the stipple names, e.g. 100x100.jef? Can you use any one of the various stipple designs or are these specific sizes that somehow relate to the size of the computed acufil
|
By
Judy Albert
·
#8164
·
|
|
acufil 12000
What is the difference between multiple settings and multiple designs in the Acufil menu and how do I use Acufil when I want to go around an embroidered design in the center of the quilt? (I.E. I
|
What is the difference between multiple settings and multiple designs in the Acufil menu and how do I use Acufil when I want to go around an embroidered design in the center of the quilt? (I.E. I
|
By
Judy Albert
·
#8163
·
|
|
Re: suggestions for selling...
There is always craigslist and eBay. Check your local dealer they may be able to sale for you or send customers your way.
From: jilleryan@...
To: janome12000@...
Date: Fri, 10 Jan 2014 08:42:29
|
There is always craigslist and eBay. Check your local dealer they may be able to sale for you or send customers your way.
From: jilleryan@...
To: janome12000@...
Date: Fri, 10 Jan 2014 08:42:29
|
By
Pam Davison
·
#8162
·
|
|
Re: a digitizer?
I use Embird. I have buzz tools but don't use it much at all. I still use smart sizer gold to view designs and resize for the 10001.
i have Digitizer 10000 did not like it. Have Digitizer mb use to
|
I use Embird. I have buzz tools but don't use it much at all. I still use smart sizer gold to view designs and resize for the 10001.
i have Digitizer 10000 did not like it. Have Digitizer mb use to
|
By
jean billingsley <jmb4@...>
·
#8161
·
|
|
Re: a digitizer?
There is also Embird to look into.
Linda M.
Canada
|
There is also Embird to look into.
Linda M.
Canada
|
By
Linda M <linlefmul@...>
·
#8160
·
|
