|
|
Re: new 12000 questions
I totally, absolutely agree with you xvictorygirl about the UPS! A
small investment for peace of mind & replacing our machines. I also
keep my laptop plugged into it.
Vicki Jo
|
I totally, absolutely agree with you xvictorygirl about the UPS! A
small investment for peace of mind & replacing our machines. I also
keep my laptop plugged into it.
Vicki Jo
|
By
vicki chrobak
·
#8010
·
|
|
Digitizer MBX 4.5 - Digitize Cutwork
Has anyone loaded this upgrade? I can’t find the Cutwork tool anyplace. All my toolbars are displaying except the Machine Status and I’ve checked all the fly-outs.
Instruction book says it is
|
Has anyone loaded this upgrade? I can’t find the Cutwork tool anyplace. All my toolbars are displaying except the Machine Status and I’ve checked all the fly-outs.
Instruction book says it is
|
By
Bea Rosier <beazoza@...>
·
#8005
·
|
|
Re: new 12000 questions-J Bobbins
Lou Ann,
The bobbins are the same for sewing and embroidery. Janome machines and I've owned quite a few in the last 30 years ALL used the same bobbins. I really like the pink and blue ones, but
|
Lou Ann,
The bobbins are the same for sewing and embroidery. Janome machines and I've owned quite a few in the last 30 years ALL used the same bobbins. I really like the pink and blue ones, but
|
By
Cheryl Paul
·
#8003
·
|
|
Re: new 12000 questions
When I have turned my 12000 off after finishing an embroidery design, I have noticed that when I turn it again, a message pops up in the window asking me if I want to go back to the previous design.
|
When I have turned my 12000 off after finishing an embroidery design, I have noticed that when I turn it again, a message pops up in the window asking me if I want to go back to the previous design.
|
By
Vikki Youngmeyer
·
#8006
·
|
|
surpised myself - walked out with a 15000
Took my MB 4 in for service and walked out with the 15000. Go back in a week for lessons but for now I have a week to play and decide what I need help with.
|
Took my MB 4 in for service and walked out with the 15000. Go back in a week for lessons but for now I have a week to play and decide what I need help with.
|
By
darlaine@...
·
#8007
·
|
|
Re: new 12000 questions
Dear Joyce
You can actually buy a thread guide that fits in the little whole separately. You do not have to buy the thread stand to obtain this thread guide. I guess because they deliver the thread
|
Dear Joyce
You can actually buy a thread guide that fits in the little whole separately. You do not have to buy the thread stand to obtain this thread guide. I guess because they deliver the thread
|
By
erna_wooloowin
·
#8004
·
|
|
Re: Bobbin noise
I wind the first 3 or 4 wraps by hand, holding the thread end under my finger where I'm holding the bobbin. Then I put it on the winder and start a little slowly first and then let it rip. In an
|
I wind the first 3 or 4 wraps by hand, holding the thread end under my finger where I'm holding the bobbin. Then I put it on the winder and start a little slowly first and then let it rip. In an
|
By
blue_lak <no_reply@...>
·
#8002
·
|
|
new 12000 questions-J Bobbins
Hmmmm. Can you see a difference in the embroidery specific bobbins? My dealer sold me what looks like "regular" bobbins in a Janome package.
|
Hmmmm. Can you see a difference in the embroidery specific bobbins? My dealer sold me what looks like "regular" bobbins in a Janome package.
|
By
Lou Ann
·
#8001
·
|
|
Re: new 12000 questions
I see you've gotten good responses from your questions. The only thing I would add is to invest in a UPS and plug your machine into the protected side of that. It's a small price compared to the
|
I see you've gotten good responses from your questions. The only thing I would add is to invest in a UPS and plug your machine into the protected side of that. It's a small price compared to the
|
By
Lou Ann
·
#8000
·
|
|
Re: Question on Applique Style Straight Stitching
Thanks for the hint. I'll have to feel my way around my bobbins as my eyes don't work like they used to, either. (p.s….I really really like your closing comments!)
|
Thanks for the hint. I'll have to feel my way around my bobbins as my eyes don't work like they used to, either. (p.s….I really really like your closing comments!)
|
By
Lou Ann
·
#7998
·
|
|
Circular Attachment
Thanks everyone for your response. Pam, yes, you are correct. I found this online:
Circular Sewing Attachment (9mm models with bobbin thread cutter plate)Part Number: 202135007
I think my dealer had
|
Thanks everyone for your response. Pam, yes, you are correct. I found this online:
Circular Sewing Attachment (9mm models with bobbin thread cutter plate)Part Number: 202135007
I think my dealer had
|
By
Suzanne Revere <srevere@...>
·
#7997
·
|
|
Re: Accufil who uses this?
Not sure if you have seen this, but it's interesting to know that we can increase the stippling spaces.
|
Not sure if you have seen this, but it's interesting to know that we can increase the stippling spaces.
|
By
gbo4
·
#7999
·
|
|
Re: Bobbin noise
What is your "technique" for winding the bobbins? Maybe mine are wound too tight at the beginning from my holding on to the tail and spinning too fast??? Should I hold the tail loosely and start out
|
What is your "technique" for winding the bobbins? Maybe mine are wound too tight at the beginning from my holding on to the tail and spinning too fast??? Should I hold the tail loosely and start out
|
By
Lou Ann
·
#7996
·
|
|
Re: circular attachment
Good Morning,
I have my circular attachment - my early Christmas present to myself. It is different the the one for the 12000 and machines with that particular needle plate. It also has a
|
Good Morning,
I have my circular attachment - my early Christmas present to myself. It is different the the one for the 12000 and machines with that particular needle plate. It also has a
|
By
Cheryl Paul
·
#7994
·
|
|
Re: Bobbin noise
Thank you! Now, if I can only remember where I saw them advertised…...
|
Thank you! Now, if I can only remember where I saw them advertised…...
|
By
Lou Ann
·
#7995
·
|
|
Re: circular attachment
I've been reading in these posts that the 12000 & 15000 have different bobbin cover/plate. Thus the quilt binding accessory and maybe circular attachment don't fit. Someone else reported that the 9200
|
I've been reading in these posts that the 12000 & 15000 have different bobbin cover/plate. Thus the quilt binding accessory and maybe circular attachment don't fit. Someone else reported that the 9200
|
By
Idatys
·
#7993
·
|
|
Re: Bobbin noise
I don’t understand why you would need the Teflon washers. I have had the 12000 and it was very quite. Guess the first thing I would do is check my bobbins. Maybe they have a problem like Carl
|
I don’t understand why you would need the Teflon washers. I have had the 12000 and it was very quite. Guess the first thing I would do is check my bobbins. Maybe they have a problem like Carl
|
By
redrocks55
·
#7992
·
|
|
Re: circular attachment
A FootBook update is in the works to include the latest feet and accessories for the 15000. One thing that slows us up is waiting to actually get them so we can take photographs. Janome usually
|
A FootBook update is in the works to include the latest feet and accessories for the 15000. One thing that slows us up is waiting to actually get them so we can take photographs. Janome usually
|
By
Jim Stutsman
·
#7989
·
|
|
Re: circular attachment
There is a circular attachment; it was originally designed for the 12,000, but should work for the 15000- we just got them in.
Kelly J
Kelly J's Sewing Center & Quilt Shop
6140 Jean Duluth Rd
Duluth,
|
There is a circular attachment; it was originally designed for the 12,000, but should work for the 15000- we just got them in.
Kelly J
Kelly J's Sewing Center & Quilt Shop
6140 Jean Duluth Rd
Duluth,
|
By
Kelly J from Kelly J's Sewing Center <kellyjsews@...>
·
#7990
·
|
|
Re: circular attachment
It is available for the 15000. Part number 202-135-007 (Circular sewing attachment).
Sent from Windows Mail
From: Suzanne Revere
Sent: Thursday, January 02, 2014 3:38
|
It is available for the 15000. Part number 202-135-007 (Circular sewing attachment).
Sent from Windows Mail
From: Suzanne Revere
Sent: Thursday, January 02, 2014 3:38
|
By
Pam Davison
·
#7991
·
|
