|
Re: bobbin thread nesting question
I am having the same problem. When the embroidery gets to a certain spot it gets stuck there creating a birds nest underneath. I removed the hoop, had a hard time as the thread was jammed in the
|
I am having the same problem. When the embroidery gets to a certain spot it gets stuck there creating a birds nest underneath. I removed the hoop, had a hard time as the thread was jammed in the
|
By
Maria Boyle
·
#512
·
|
|
Re: Bobbin thread question
Thanks again. It sure is interesting the different info you get from different people. Every time someone tells me you can't do something, it seems like someone else comes up with a way to do it.
|
Thanks again. It sure is interesting the different info you get from different people. Every time someone tells me you can't do something, it seems like someone else comes up with a way to do it.
|
By
Sherry Martin
·
#511
·
|
|
Re: Quilt binding info
Hi, Jo Ann. Thought you might enjoy seeing what a Canadian Janome educator
has to say about the quilt binder. Here's a link to her blog,
http://janomelife.wordpress.com/, and check out the November
|
Hi, Jo Ann. Thought you might enjoy seeing what a Canadian Janome educator
has to say about the quilt binder. Here's a link to her blog,
http://janomelife.wordpress.com/, and check out the November
|
By
Chris Krause <nckrause@...>
·
#510
·
|
|
bobbin thread nesting question
I am doing an in the hoop design (dig. will remain not mentioned). When I get to a certain spot I get a terrible birds nest under the hoop so that I can bearly cut under to remove the hoop. I have
|
I am doing an in the hoop design (dig. will remain not mentioned). When I get to a certain spot I get a terrible birds nest under the hoop so that I can bearly cut under to remove the hoop. I have
|
By
judyjanome <judyjanome@...>
·
#509
·
|
|
Re: Bobbin thread question
On the 11000 you can adjust the "alert" point of the low bobbin sensor. Touch the SET key, then the Ordinary Sewing key. It should come up to page SET1. The second setting adjusts the warning point.
|
On the 11000 you can adjust the "alert" point of the low bobbin sensor. Touch the SET key, then the Ordinary Sewing key. It should come up to page SET1. The second setting adjusts the warning point.
|
By
Jim_Stutsman <jim@...>
·
#508
·
|
|
Re: Bobbin thread question
In embroidery mode the machine checks the bobbin supply immediately after the START button is pressed, and at various times during embroidery. Once it has been determined to be too low, it won't sew
|
In embroidery mode the machine checks the bobbin supply immediately after the START button is pressed, and at various times during embroidery. Once it has been determined to be too low, it won't sew
|
By
Jim_Stutsman <jim@...>
·
#507
·
|
|
Re: Bobbin thread question
Yes it does. It gives you a warning and then will not let you sewagain until you put a new bobbin in. I found that out just lastnight. I still had thread in the bobbin but not much. I have
|
Yes it does. It gives you a warning and then will not let you sewagain until you put a new bobbin in. I found that out just lastnight. I still had thread in the bobbin but not much. I have
|
By
Virginia
·
#506
·
|
|
Re: Bobbin thread question
Can I butt in with a question,please? I just the 11000 last week.Is there a way to turn off that low bobbin while doing normal sewing? It is driving me crazy when it keeps beeping. My Singer
|
Can I butt in with a question,please? I just the 11000 last week.Is there a way to turn off that low bobbin while doing normal sewing? It is driving me crazy when it keeps beeping. My Singer
|
By
Anna C Simon <rbs11739@...>
·
#505
·
|
|
Re: Quilt binding video from Janome Canada
Wish I had one of those wonderful gadgets likeipad, etc but the next best thing will be to buy the DVD...early Christmaspresent for myself?
Jo Ann
|
Wish I had one of those wonderful gadgets likeipad, etc but the next best thing will be to buy the DVD...early Christmaspresent for myself?
Jo Ann
|
By
Jo Ann <joannely1@...>
·
#504
·
|
|
Re: Bobbin thread question
Yes. And in the embroidery settings you can tell it how low you want the bobbin thread to get before it stops.
I went for a lesson on my 12000 today and did learn that unlike the 11000 you can't
|
Yes. And in the embroidery settings you can tell it how low you want the bobbin thread to get before it stops.
I went for a lesson on my 12000 today and did learn that unlike the 11000 you can't
|
By
Sherry Martin
·
#503
·
|
|
Bobbin thread question
Hello,
I am using my embroidery for the first time. I have started a design. I prewound 5 bobbins before I started the project. My question is, while embroidering, will the machine stop if it
|
Hello,
I am using my embroidery for the first time. I have started a design. I prewound 5 bobbins before I started the project. My question is, while embroidering, will the machine stop if it
|
By
Maria Boyle
·
#502
·
|
|
Re: Quilt binding video from Janome Canada
Our FootBook app (iPhone/iPod Touch/iPad) and DVD have a video for this binder that shows all the steps, including how to adjust the binder and miter the
|
Our FootBook app (iPhone/iPod Touch/iPad) and DVD have a video for this binder that shows all the steps, including how to adjust the binder and miter the
|
By
Jim_Stutsman <jim@...>
·
#501
·
|
|
Quilt binding video from Janome Canada
Just saw this and thought it looked pretty simple but the next up-coming video should show what happens at the dreaded corners....
http://www.youtube.com/watch?v=3lRJq-L00j0&feature=digest_thu
Jo
|
Just saw this and thought it looked pretty simple but the next up-coming video should show what happens at the dreaded corners....
http://www.youtube.com/watch?v=3lRJq-L00j0&feature=digest_thu
Jo
|
By
mrsmole_uk <joannely1@...>
·
#500
·
|
|
Re: At last the great HOrizon 12000
Congratulations! I got my baby on Tuesday 11/29/11. I named her Baby Jane. Anyone else name their new Horizon? It's out of the box and on my sewing table. Can't wait to play with her. I have to
|
Congratulations! I got my baby on Tuesday 11/29/11. I named her Baby Jane. Anyone else name their new Horizon? It's out of the box and on my sewing table. Can't wait to play with her. I have to
|
By
Maria Boyle
·
#499
·
|
|
Re: Needle Threader Problem 12000
Boy you are such a genius! I wish you could live with me for a couple of weeks until I figure out everything on the machine. I had an 11000 before and I was an accountant and know computers so I
|
Boy you are such a genius! I wish you could live with me for a couple of weeks until I figure out everything on the machine. I had an 11000 before and I was an accountant and know computers so I
|
By
Sherry Martin
·
#498
·
|
|
Re: Dual feed 1/4 inch foot
Diane suggests using the Cloth Guide in tandem with the 1/4 inch foot. Set it for a 1/4 inch seam and it extends the guide for easy alignment.
|
Diane suggests using the Cloth Guide in tandem with the 1/4 inch foot. Set it for a 1/4 inch seam and it extends the guide for easy alignment.
|
By
Jim_Stutsman <jim@...>
·
#497
·
|
|
Re: Needle Threader Problem 12000
The hook on the needle threader has to be small enough to go through the eye of a needle. Unfortunately that makes it very fragile and easily bent. Factory calibration is done using a 14 needle, which
|
The hook on the needle threader has to be small enough to go through the eye of a needle. Unfortunately that makes it very fragile and easily bent. Factory calibration is done using a 14 needle, which
|
By
Jim_Stutsman <jim@...>
·
#496
·
|
|
Re: At last the great HOrizon 12000
There's actually a Sashiko stitch in the 12000. Touch the Applications key (T-shirt), then Quilting, then Sculpture and it's the third one on that screen. You'll use the AD dual feed foot, as called
|
There's actually a Sashiko stitch in the 12000. Touch the Applications key (T-shirt), then Quilting, then Sculpture and it's the third one on that screen. You'll use the AD dual feed foot, as called
|
By
Jim_Stutsman <jim@...>
·
#495
·
|
|
Dual feed 1/4 inch foot
I got my 12000 last week and have been putting it thru its paces.
I was really excited about the dual feed foot, but when I use the 1/4" foot I have a hard time seeing under the foot to tell if my
|
I got my 12000 last week and have been putting it thru its paces.
I was really excited about the dual feed foot, but when I use the 1/4" foot I have a hard time seeing under the foot to tell if my
|
By
Sherry Martin
·
#494
·
|
|
Re: Unusual request problem found & fixed
Great! Glad it was an easy solution. Heads up to the rest of you -- Make sure you turn off "Consecutive Colour Grouping" in SET>Embroidery to preserve the colour order the digitizer intended. It is
|
Great! Glad it was an easy solution. Heads up to the rest of you -- Make sure you turn off "Consecutive Colour Grouping" in SET>Embroidery to preserve the colour order the digitizer intended. It is
|
By
Donna Morton
·
#493
·
|
