|
Re: Design Gallery
The settings in Design Gallery are controlled by how you have your computer configured. Go to Control Panel, Regional and Language Settings. I'm guessing that you don't have Danish as your language.
|
The settings in Design Gallery are controlled by how you have your computer configured. Go to Control Panel, Regional and Language Settings. I'm guessing that you don't have Danish as your language.
|
By
Jim_Stutsman <jim@...>
·
#4222
·
|
|
Design Gallery
Hi everyone!
In Design Gallery, summary view and Properties, all measurements are in inches. When viewing the help screens the same is shown in metric.
I have looked and searched but not found a place
|
Hi everyone!
In Design Gallery, summary view and Properties, all measurements are in inches. When viewing the help screens the same is shown in metric.
I have looked and searched but not found a place
|
By
nejsbjerg <aasepetersen@...>
·
#4221
·
|
|
Re: MBX R2 Update problem
We are using the same version of MBX without this or any other problem. We are on Fusion 4.1.4. If you are using an earlier version, you might want to upgrade. You might also reinstall the VMware
|
We are using the same version of MBX without this or any other problem. We are on Fusion 4.1.4. If you are using an earlier version, you might want to upgrade. You might also reinstall the VMware
|
By
Jim_Stutsman <jim@...>
·
#4220
·
|
|
Re: Foot up and down question
Hi Pixey
I find I have the best luck by first lowering the foot with the footup/down button. Then I use the manual lever in the back. Seems tostop the over-ride to automatic for me.
Donna
|
Hi Pixey
I find I have the best luck by first lowering the foot with the footup/down button. Then I use the manual lever in the back. Seems tostop the over-ride to automatic for me.
Donna
|
By
Donna Morton
·
#4219
·
|
|
MBX R2 Update problem
Jim, I updated my MBX 4 software with version "m". I have a MacBook Pro with Fusion, and XPPro (with all of its updates). The Resequence Bar does not stay open, I can click on an object and then if
|
Jim, I updated my MBX 4 software with version "m". I have a MacBook Pro with Fusion, and XPPro (with all of its updates). The Resequence Bar does not stay open, I can click on an object and then if
|
By
Andrea LaVergne
·
#4218
·
|
|
Re: 12000/8900 Feet
Yes, I'd like to have a dual feed open toe foot also. I like using it for stitching in the ditch. I know there is a stitch in the ditch foot, but I've always preferred an open toe foot where I can
|
Yes, I'd like to have a dual feed open toe foot also. I like using it for stitching in the ditch. I know there is a stitch in the ditch foot, but I've always preferred an open toe foot where I can
|
By
shejmartin1
·
#4217
·
|
|
Re: Convince me to go try out the 12000
I had the 10,000 from the day it came out and loved it. About 18 months ago the hard drive in it crashed for the second time and I wasn't going to drop another $1000 on it so I purchased a 350 -
|
I had the 10,000 from the day it came out and loved it. About 18 months ago the hard drive in it crashed for the second time and I wasn't going to drop another $1000 on it so I purchased a 350 -
|
By
monal
·
#4216
·
|
|
Re: Convince me to go try out the 12000
My thanks to all of you for your quick replies.
My plans are to go and visit my dealer in the next couple of weeks and try out the 12000. If I get this machine, I'm sure I'll be a regular
|
My thanks to all of you for your quick replies.
My plans are to go and visit my dealer in the next couple of weeks and try out the 12000. If I get this machine, I'm sure I'll be a regular
|
By
sue
·
#4215
·
|
|
Re: 12000/8900 Feet
The dual feed 1/4" piecing foot is one of the feet I'm talking about.
I've ask my dealer to see if they can order one for me. I'm sure hoping
they come out with the dual feed open-toe, 9mm. I mean,
|
The dual feed 1/4" piecing foot is one of the feet I'm talking about.
I've ask my dealer to see if they can order one for me. I'm sure hoping
they come out with the dual feed open-toe, 9mm. I mean,
|
By
Richard and Debra
·
#4214
·
|
|
Foot up and down question
While I primarily bought the 12000 for its big hoop embroidery capabilities, I was doing a handbag project this past weekend where I wanted to utilize some of the 12000 specific sewing features,
|
While I primarily bought the 12000 for its big hoop embroidery capabilities, I was doing a handbag project this past weekend where I wanted to utilize some of the 12000 specific sewing features,
|
By
Pixey
·
#4213
·
|
|
Re: Convince me to go try out the 12000
Hi Sue,
The 12000 sounds complicated and confusing because it has so much potential. Also, keep in mind that members of this group come from all paths and experience levels, from embroidery newbies
|
Hi Sue,
The 12000 sounds complicated and confusing because it has so much potential. Also, keep in mind that members of this group come from all paths and experience levels, from embroidery newbies
|
By
Pixey
·
#4212
·
|
|
Re: To buy or not to buy? Video
I have practised what I have preached for years. Janome everytime...I have used Bernina and Brother,would not touch them with a barge pole I had a metal bodied Bernina for many years till I bought my
|
I have practised what I have preached for years. Janome everytime...I have used Bernina and Brother,would not touch them with a barge pole I had a metal bodied Bernina for many years till I bought my
|
By
Anne <csarina43@...>
·
#4211
·
|
|
Re: Convince me to go try out the 12000
Sue - I have had my 12000 a little over a year - it is the most user friendly machine I have ever had, and I have had several. It is not at all complicated and it embroideries and sews
|
Sue - I have had my 12000 a little over a year - it is the most user friendly machine I have ever had, and I have had several. It is not at all complicated and it embroideries and sews
|
By
lynschieber <lynnschieber@...>
·
#4210
·
|
|
Re: Convince me to go try out the 12000
I purchased my 12K in December. At first I was overwhelmed with evrything. Now that I have had time to get use to the 12K I am so happy I purchased the 12K. It really is not complicated. Just read the
|
I purchased my 12K in December. At first I was overwhelmed with evrything. Now that I have had time to get use to the 12K I am so happy I purchased the 12K. It really is not complicated. Just read the
|
By
Connie <cldparrish@...>
·
#4209
·
|
|
Re: 12000/8900 Feet
The OD foot that comes with the 12000 is for dual feed 1/4" piecing. The only open toe foot for quilting is the QO foot, which is not dual feed. No dual feed open toe foot has been announced. Like the
|
The OD foot that comes with the 12000 is for dual feed 1/4" piecing. The only open toe foot for quilting is the QO foot, which is not dual feed. No dual feed open toe foot has been announced. Like the
|
By
Jim_Stutsman <jim@...>
·
#4208
·
|
|
Re: Convince me to go try out the 12000
I got my 12000 several months ago and have been really happy with it. I think it's the ultimate in machines of this kind. You won't be sorry.
|
I got my 12000 several months ago and have been really happy with it. I think it's the ultimate in machines of this kind. You won't be sorry.
|
By
Kathy <beadqueen@...>
·
#4207
·
|
|
12000/8900 Feet
I have the 8900, and wondering if an accufeed 1/4" foot is available yet for the 12000; also looking for the open-toe accufeed foot. Does anyone know of these are available, or will be available
|
I have the 8900, and wondering if an accufeed 1/4" foot is available yet for the 12000; also looking for the open-toe accufeed foot. Does anyone know of these are available, or will be available
|
By
Richard and Debra
·
#4206
·
|
|
Re: Convince me to go try out the 12000
I also started with the 8000 and still have it, but then I went to 11000 and now have the 12000...I upgraded from the 11000 to 12000 just to get the extra large hoop although not any companies that I
|
I also started with the 8000 and still have it, but then I went to 11000 and now have the 12000...I upgraded from the 11000 to 12000 just to get the extra large hoop although not any companies that I
|
By
JUDY
·
#4205
·
|
|
Re: Convince me to go try out the 12000
I have the 12,000 and it is much more user friendly than some of the other TOL machines on the market today. It is very straight forward to use. Of course there is a learning curve, as with anything,
|
I have the 12,000 and it is much more user friendly than some of the other TOL machines on the market today. It is very straight forward to use. Of course there is a learning curve, as with anything,
|
By
grandma
·
#4204
·
|
|
Re: Convince me to go try out the 12000
Your 10000 problem is most likely due to a Compact Flash card that is worn out. They don't last forever, and when they start going bad you'll start getting error messages.
That said, the 12000 is a
|
Your 10000 problem is most likely due to a Compact Flash card that is worn out. They don't last forever, and when they start going bad you'll start getting error messages.
That said, the 12000 is a
|
By
Jim_Stutsman <jim@...>
·
#4203
·
|
