onlinesewing-janome@groups.io

Re: 2 things

Pixey, the Resume mode means that everything you had set up including jogging the design, changing colors etc will be exactly as you left it. If it's not resuming exactly how you had set it, then

By favymtz · #28914 ·

Re: 2 things

Cheryl, I did learn the hard was to keep that bobbin notification on for embroidery! I use the almost empty spools when I'm doing a tack down at the beginning or applique, anywhere that it won't

By Ceil J · #28913 ·

Re: 2 things

For the remaining thread on your bobbin: If you turn it “OFF” it will keep on stitching and in embroidery especially that can be a problem. The needle thread usually breaks somewhere, and

By Cheryl Paul · #28912 ·

another question

Thanks for the bobbin help. Will ck out the Set Screen and pg 128 on the 12000 manual. My 12000 has just started a blink, blink, blink screen while embroiderin,g with either a broken thread window

By Joyce Daniel · #28911 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

Thank you!!

By Lorraine Nygaard · #28910 ·

Re: 2 things

I have never had to test this thankfully, but if you jogged over to align a design at the start, does Resume mode catch this as well? Or does it recenter the design before it goes to the the stitch

By Pixey · #28909 ·

Re: 2 things

Re the Resume mode, if you have it turned on the machine should return to exactly everything that you had set up and were in the midst of using when you turned the machine off and then later try to

By favymtz · #28908 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

Wow! Thank you! Suzanne Martin, Broker, GRI MPI Realty (407) 234-6906 Suzmar45@... Rocket Pro℠ Loan Originator Home Purchase And Refinance NMLS #2095733

By Suzanne Martin · #28907 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

https://data2.manualslib.com/pdf4/93/9236/923569-janome/mc15000.pdf?2ac9b8a9f3f2387b0ae6ddb5408794c5

By Helen Aarness · #28906 ·

Re: 2 things

Remember in your set screen you have many options, however each time you change something you need to press ok or it won't remember. In this case resume must be checked. Sent from my T-Mobile 4G LTE

By Virginia · #28905 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

If you google the Janome (model of machine) repair manual it is a pdf to download. However once you do something to your machines and you are not a repair tech or dealer it voids your warranty. My

By Virginia · #28904 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

Do you have the link to the 15000 manual? Randi Kemper randisbear1@... -- Randi Kemper Magical Machine Embroidery

By Randi Kemper · #28903 ·

Re: 2 things

Item 2 - See the manual, page 128. The remaining bobbin thread sensor can be adjusted to leave less (-) or more (+) thread before warning about low bobbin.

By Jim Stutsman · #28902 ·

2 things

1.Just an FYI to ck and re Check your machine. On my 12000, I was working on a fuzzy blanket. I had knockdown stitching done and then the name and Bible verse needed to stitch on top of the Knockdown

By Joyce Daniel · #28901 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

Where did you get the download for the Repair Manual for the 15000? I only have the user’s manual. thank you for the information and the great idea regarding video.

By Judy · #28900 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

Cynthia, That's a really good idea! The needle threader on the 15000 moves so fast, it's really hard to see if the thread went in the needle. And, it's good to know that the repair manual has that

By Kathy Skagen · #28899 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

Good information. I, for sure, will try this. Thanks. Barbara Wolcott barb2220@...

By Barbara Wolcott · #28898 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

Something that I had read and worked wonders for me was to take my i-phone and take a video of the needle going up and down. Then you can play back the video and stop it where necessary and reallly

By Cynthia Dickerson · #28897 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

striplett3---My threader occasionally gets out of whack and looks like it is going through the needle's eye, but is not really going through. I have corrected this by getting down at eye level with

By Kathy Strabel · #28896 ·

Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread #file-notice

The piece that goes through the eye has a hook on it. If it truly is going through the eye, not to either side of the needle, then the hook has likely either bent closed or broken off. This will

By Jim Stutsman · #28895 ·