|
Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread
#file-notice
striplett3---My threader occasionally gets out of whack and looks like it is going through the needle's eye, but is not really going through. I have corrected this by getting down at eye level with
|
striplett3---My threader occasionally gets out of whack and looks like it is going through the needle's eye, but is not really going through. I have corrected this by getting down at eye level with
|
By
Kathy Strabel
·
#28896
·
|
|
Re: Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread
#file-notice
The piece that goes through the eye has a hook on it. If it truly is going through the eye, not to either side of the needle, then the hook has likely either bent closed or broken off. This will
|
The piece that goes through the eye has a hook on it. If it truly is going through the eye, not to either side of the needle, then the hook has likely either bent closed or broken off. This will
|
By
Jim Stutsman
·
#28895
·
|
|
Automatic threader probLem needle goes thru the needle hole but doesn’t engage the thread
#file-notice
Anyone know how to fix this.
|
Anyone know how to fix this.
|
By
striplett3@...
·
#28894
·
|
|
Re: Help needed Modifying/creating a Stitch
Thank you Favymtz. I'll take a look tonight to see if I can get this to work for what I need.
I have to go back on my PC to access Horizon Suite since I primarily use a Mac and
HS is not available in
|
Thank you Favymtz. I'll take a look tonight to see if I can get this to work for what I need.
I have to go back on my PC to access Horizon Suite since I primarily use a Mac and
HS is not available in
|
By
juliadlf.ny@...
·
#28893
·
|
|
Re: Help needed Modifying/creating a Stitch
You're welcome Kathy!
Just a note about the stitch chart that I made:
These are the stitches that come with Horizon Link Suite,
the numbers do not match the stitch number on the sewing machine even
|
You're welcome Kathy!
Just a note about the stitch chart that I made:
These are the stitches that come with Horizon Link Suite,
the numbers do not match the stitch number on the sewing machine even
|
By
favymtz
·
#28892
·
|
|
Re: Help needed Modifying/creating a Stitch
Hi Favy,
I have been following this conversation and I want to thank you for the pdf you attached. Your information is helping me to understand the nuances of my machine, especially .ord and
|
Hi Favy,
I have been following this conversation and I want to thank you for the pdf you attached. Your information is helping me to understand the nuances of my machine, especially .ord and
|
By
Kathy Skagen
·
#28891
·
|
|
Re: Help needed Modifying/creating a Stitch
I would love to offer you some more advice Julia, but let me know if what I write here isn't what you need!
When you say you want it to start at the "center of a circle" do you mean literally in the
|
I would love to offer you some more advice Julia, but let me know if what I write here isn't what you need!
When you say you want it to start at the "center of a circle" do you mean literally in the
|
By
favymtz
·
#28890
·
|
|
Re: Embroidery Simulator
Thank you so much. I activated the View Embroidery and embroidery simulator activated.
Carole
|
Thank you so much. I activated the View Embroidery and embroidery simulator activated.
Carole
|
By
Carole O'Mara
·
#28889
·
|
|
Re: Help Please
This problem happens over and over because every Windows allows every program installed to set itself as the default to open for files of certain types. It's also perilously easy to do this by
|
This problem happens over and over because every Windows allows every program installed to set itself as the default to open for files of certain types. It's also perilously easy to do this by
|
By
Jim Stutsman
·
#28888
·
|
|
Help Please
Hi Jim, yes I am still around ;). Suddenly my .jef files have the E symbol (file explore) on them instead H for Hatch. It is also on the .sew files (yes I have a few of them lurking around ;) ) but
|
Hi Jim, yes I am still around ;). Suddenly my .jef files have the E symbol (file explore) on them instead H for Hatch. It is also on the .sew files (yes I have a few of them lurking around ;) ) but
|
By
Sara Jane
·
#28887
·
|
|
Re: Embroidery Simulator
What program are you using?
Cheryl - Saskatoon
|
What program are you using?
Cheryl - Saskatoon
|
By
Cheryl Paul
·
#28886
·
|
|
Help needed Modifying/creating a Stitch
I am trying to modify or create a stitch for an applique project I am working on.
I've tried the Horizon Suite to create in Stitch Composer but cannot get it to stitch correctly.
The stitch I am
|
I am trying to modify or create a stitch for an applique project I am working on.
I've tried the Horizon Suite to create in Stitch Composer but cannot get it to stitch correctly.
The stitch I am
|
By
juliadlf.ny@...
·
#28885
·
|
|
Re: Embroidery Simulator
I'm assuming you're working in the Horizon Link?
If so, the View Embroidery Button is what you need
Click on it and it toggles into it's 2nd function: (it turns yellow to show it's changed)
Once it
|
I'm assuming you're working in the Horizon Link?
If so, the View Embroidery Button is what you need
Click on it and it toggles into it's 2nd function: (it turns yellow to show it's changed)
Once it
|
By
favymtz
·
#28884
·
|
|
Embroidery Simulator
I have MC15000 and have imported a purchased embroidery design. The 'embroidery simulator' function is grayed out. How do I turn that function on?
Thanks,
Carole
|
I have MC15000 and have imported a purchased embroidery design. The 'embroidery simulator' function is grayed out. How do I turn that function on?
Thanks,
Carole
|
By
Carole O'Mara
·
#28883
·
|
|
Re: USB stick 550e
Hi Pixey,
I got the a cheap, 3rd party adapter from ... Amazon I think. Actually it's mainly an SD card reader I used to transfer photos from my camera when being abroad w/o my Mac. There are
|
Hi Pixey,
I got the a cheap, 3rd party adapter from ... Amazon I think. Actually it's mainly an SD card reader I used to transfer photos from my camera when being abroad w/o my Mac. There are
|
By
Mattes
·
#28882
·
Edited
|
|
Re: USB stick 550e
Hi Mattes! I was hoping you would catch up and chime in with better explanation that I could provide.
And I learned something new! I have been really busy with some things the last few months and
|
Hi Mattes! I was hoping you would catch up and chime in with better explanation that I could provide.
And I learned something new! I have been really busy with some things the last few months and
|
By
Pixey
·
#28881
·
|
|
Re: USB stick 550e
Thanks Mattes,
I was hoping that you were following along on this topic and really glad that you jumped in to give us a very good explanation of everything. I have so many digitizing programs, that
|
Thanks Mattes,
I was hoping that you were following along on this topic and really glad that you jumped in to give us a very good explanation of everything. I have so many digitizing programs, that
|
By
Cheryl Paul
·
#28880
·
|
|
Re: USB stick 550e
As they say in Munich, "Ja, das stimmt." Yes, that's right. I can only add that if you use a Mac or iPad, you should have StitchBuddy. It's great software.
|
As they say in Munich, "Ja, das stimmt." Yes, that's right. I can only add that if you use a Mac or iPad, you should have StitchBuddy. It's great software.
|
By
Jim Stutsman
·
#28879
·
|
|
Re: USB stick 550e
Let's shed some light on the StitchBuddy piece - as there are some topics addresses and questions asked:
There are two StitchBuddy versions for Mac and iPhone/iPad with very similar (but not
|
Let's shed some light on the StitchBuddy piece - as there are some topics addresses and questions asked:
There are two StitchBuddy versions for Mac and iPhone/iPad with very similar (but not
|
By
Mattes
·
#28878
·
|
|
Re: USB stick 550e
I have StitchBuddy on both my MacBook Pro laptop and on my iPhone, and iPad. I’m not sure that it will open files that are JPX. I’ve contacted Mattias about this but I’m not sure if he has
|
I have StitchBuddy on both my MacBook Pro laptop and on my iPhone, and iPad. I’m not sure that it will open files that are JPX. I’ve contacted Mattias about this but I’m not sure if he has
|
By
Cheryl Paul
·
#28877
·
|
