|
Re: Janome HD Roller Foot for Janome 7mm and 9mm High Shank Machines
Janome dealers should all carry the foot compatible with the 15000. Just last week I asked my dealer about it and am scheduled to go in and test it out before purchasing it.
It's pretty expensive so
|
Janome dealers should all carry the foot compatible with the 15000. Just last week I asked my dealer about it and am scheduled to go in and test it out before purchasing it.
It's pretty expensive so
|
By
favymtz
·
#28228
·
|
|
Threading Machine Tips
I copied some good information regarding how to thread the sewing machine based on the types of spools.
This is from the "We All Sew" website sponsored by Bernina, so the machines in the pictures
|
I copied some good information regarding how to thread the sewing machine based on the types of spools.
This is from the "We All Sew" website sponsored by Bernina, so the machines in the pictures
|
By
favymtz
·
#28227
·
|
|
Re: Diane's DIY magnetic hoop
Interesting that you say you always heard that the thread should come off the bottom not the top of the spool when in the horizontal position!
I always have heard and done the opposite, Off the Top!
|
Interesting that you say you always heard that the thread should come off the bottom not the top of the spool when in the horizontal position!
I always have heard and done the opposite, Off the Top!
|
By
favymtz
·
#28226
·
|
|
Re: AcuStitch
No, you cannot change from mm to inches in the AcuStitch program.
--
Favymtz
|
No, you cannot change from mm to inches in the AcuStitch program.
--
Favymtz
|
By
favymtz
·
#28225
·
|
|
AcuStitch
Jim
Working with the AcuStitch program can I change the measurements to inches from meters. I changed my settings on the machine to be inches but cannot find a place to change the measurements to
|
Jim
Working with the AcuStitch program can I change the measurements to inches from meters. I changed my settings on the machine to be inches but cannot find a place to change the measurements to
|
By
Jeanniett Chicky
·
#28224
·
|
|
Janome HD Roller Foot for Janome 7mm and 9mm High Shank Machines
I have just watched video for a roller foot that has a small 'tire' on the side. It can be used for free motion quilting, stitch in the ditch and much more. It was originally meant for sewing
|
I have just watched video for a roller foot that has a small 'tire' on the side. It can be used for free motion quilting, stitch in the ditch and much more. It was originally meant for sewing
|
By
Carole O'Mara
·
#28223
·
|
|
Re: Diane's DIY magnetic hoop
Greetings----This may be a long shot, but I had an incident a few days ago with my S7 Janome making a loud squealing noise and got that message saying to slowly raise the needle bar, then turn the
|
Greetings----This may be a long shot, but I had an incident a few days ago with my S7 Janome making a loud squealing noise and got that message saying to slowly raise the needle bar, then turn the
|
By
Kathy Strabel
·
#28222
·
|
|
Re: Diane's DIY magnetic hoop
Bottom Line is a versatile thread, and it comes in so many colors.
I use it in the bobbin for almost all of my embroidery.
It's also great for the:
Hand look quilt stitch in the bobbin with
|
Bottom Line is a versatile thread, and it comes in so many colors.
I use it in the bobbin for almost all of my embroidery.
It's also great for the:
Hand look quilt stitch in the bobbin with
|
By
favymtz
·
#28221
·
|
|
Re: Diane's DIY magnetic hoop
I've used all kinds of combos and they all seemed to work well. What I always do is test them out first. That way, if there is a problem, you'll be either able to tweek it or not use it. I make up
|
I've used all kinds of combos and they all seemed to work well. What I always do is test them out first. That way, if there is a problem, you'll be either able to tweek it or not use it. I make up
|
By
Ceil J
·
#28220
·
|
|
Re: Diane's DIY magnetic hoop
I've never tried 60 wt Bottom Line thread in the bobbin. Can I use an Aurfil 50wt in top since the Bottom Line is finer? I have used Wunderfil 100 wt but only for machine applique for a 'no show'
|
I've never tried 60 wt Bottom Line thread in the bobbin. Can I use an Aurfil 50wt in top since the Bottom Line is finer? I have used Wunderfil 100 wt but only for machine applique for a 'no show'
|
By
Carole O'Mara
·
#28219
·
|
|
Re: Diane's DIY magnetic hoop
Wellll.... I hate to be the bearer of maybe bad news. This same problem started with my 15000 about a year ago. I coordinated Janome Club for my dealer & it happened once again while I was
|
Wellll.... I hate to be the bearer of maybe bad news. This same problem started with my 15000 about a year ago. I coordinated Janome Club for my dealer & it happened once again while I was
|
By
Debe
·
#28218
·
|
|
Re: New Top of the Line Janome Machines?
Our Canadian Education Manager has gone to Japan a few times before Janome Institute and seen the reveal - this is usually a couple months before Institute. We usually see her at the Saskatchewan
|
Our Canadian Education Manager has gone to Japan a few times before Janome Institute and seen the reveal - this is usually a couple months before Institute. We usually see her at the Saskatchewan
|
By
Cheryl Paul
·
#28217
·
|
|
Re: New Top of the Line Janome Machines?
I haven't heard any rumors about any new sewing machines, but I'd guess the 100th anniversary is going to be featured.
Janome has decided to have Institute this year, but has delayed it from it's
|
I haven't heard any rumors about any new sewing machines, but I'd guess the 100th anniversary is going to be featured.
Janome has decided to have Institute this year, but has delayed it from it's
|
By
Steven C. Haber
·
#28216
·
|
|
Re: New Top of the Line Janome Machines?
I'm sure it will be announced at Janome Institute, to be held (virtually? somewhere?). Beyond that I have no clue.
|
I'm sure it will be announced at Janome Institute, to be held (virtually? somewhere?). Beyond that I have no clue.
|
By
Jim Stutsman
·
#28215
·
|
|
Re: Diane's DIY magnetic hoop
I used the blue dot case too and the thread wasn't an issue as it successfully stitched out for most of the quilt. I'm using Bottom Line for the bobbin and a cone of Robson-Anton. I have also used
|
I used the blue dot case too and the thread wasn't an issue as it successfully stitched out for most of the quilt. I'm using Bottom Line for the bobbin and a cone of Robson-Anton. I have also used
|
By
Ceil J
·
#28214
·
|
|
Re: Diane's DIY magnetic hoop
Please refresh my memory on how to get Diane's DIY magnet hoop instructions. TIA
|
Please refresh my memory on how to get Diane's DIY magnet hoop instructions. TIA
|
By
iluvsew2
·
#28213
·
|
|
New Top of the Line Janome Machines?
Say Jim, any speculations for what's on the horizon for our Horizons since it's the 100th Anniversary?
I'm not as acquainted with Janome's release dates as I am with Apples ;P
Thanks,
Marsha
|
Say Jim, any speculations for what's on the horizon for our Horizons since it's the 100th Anniversary?
I'm not as acquainted with Janome's release dates as I am with Apples ;P
Thanks,
Marsha
|
By
Marsha_Comcast
·
#28212
·
|
|
Re: Diane's DIY magnetic hoop
Here's the video: https://youtu.be/DV9bDAYHOQg
|
Here's the video: https://youtu.be/DV9bDAYHOQg
|
By
Jim Stutsman
·
#28211
·
|
|
Re: Diane's DIY magnetic hoop
Which bobbin did you use? I used the blue dot as Diane suggested. I also used 50wt thread top and bottom. Any suggestions if using a different thread?
Carole - CO
|
Which bobbin did you use? I used the blue dot as Diane suggested. I also used 50wt thread top and bottom. Any suggestions if using a different thread?
Carole - CO
|
By
Carole O'Mara
·
#28210
·
|
|
Re: Diane's DIY magnetic hoop
I must have missed the video that Diane did but would like to know how I can order the magnets that Diane recommends as well as how to watch the video.
Thanks
Gail
|
I must have missed the video that Diane did but would like to know how I can order the magnets that Diane recommends as well as how to watch the video.
Thanks
Gail
|
By
Gail Berkler
·
#28209
·
|
