|
|
Re: Smaller shank 5mm for the Janome 79mm
I'm sry, I did mean the 7mm. And ty for getting back to me. I just wasn't sure if it was possible, I just wanted it for straight stitching and nothing else. Ty so much
|
I'm sry, I did mean the 7mm. And ty for getting back to me. I just wasn't sure if it was possible, I just wanted it for straight stitching and nothing else. Ty so much
|
By
Tammy Gosselin
·
#28102
·
|
|
Re: Smaller shank 5mm for the Janome 79mm
There is no 5mm foot holder that could be used on the 15000, and trying to use that could cause big problems. You could use a 7mm high shank adapter with 7mm feet. There are two that you could
|
There is no 5mm foot holder that could be used on the 15000, and trying to use that could cause big problems. You could use a 7mm high shank adapter with 7mm feet. There are two that you could
|
By
Jim Stutsman
·
#28101
·
|
|
Smaller shank 5mm for the Janome 79mm
Not sure if I will be wording this correct or if this has been asked before. But is there an adapter we can buy for the Janome 15,000 that will turn the shank (which hold the feet) into a small size.
|
Not sure if I will be wording this correct or if this has been asked before. But is there an adapter we can buy for the Janome 15,000 that will turn the shank (which hold the feet) into a small size.
|
By
Tammy Gosselin
·
#28100
·
|
|
Re: DIY - make your own magnetic hoop for the 15000 using the GR hoop
I understand lack of space! Did you know that dog grooming arms (for grooming tables) will clamp onto table surfaces and you can get as many or as few as you need for whatever configuration necessary
|
I understand lack of space! Did you know that dog grooming arms (for grooming tables) will clamp onto table surfaces and you can get as many or as few as you need for whatever configuration necessary
|
By
Cat - N
·
#28099
·
|
|
Re: Janome 300E
I will remember that, for when I need to know something, right now, no time to be using the
|
I will remember that, for when I need to know something, right now, no time to be using the
|
By
a67skc70
·
#28098
·
|
|
Re: Janome 300E
You should check on facebook. The 300 is really old technology, however the tips here should relate to all embroidering. The procedures are the same. Now on a different aspect I had the 300E many
|
You should check on facebook. The 300 is really old technology, however the tips here should relate to all embroidering. The procedures are the same. Now on a different aspect I had the 300E many
|
By
Virginia
·
#28097
·
|
|
Re: DIY - make your own magnetic hoop for the 15000 using the GR hoop
How great you are!! Not only do you create a magnetic hoop for the GR hoop, but you give us the part numbers AND make a ‘how to’ video. Since my sewing room is small my husband is planning a
|
How great you are!! Not only do you create a magnetic hoop for the GR hoop, but you give us the part numbers AND make a ‘how to’ video. Since my sewing room is small my husband is planning a
|
By
Carole O'Mara
·
#28096
·
|
|
Re: Janome 300E
ok, good to know, I will just stay on the group then. I got my machines in, I think 2007. They both work well, but you never know when something will become a problem. I have never needed to upgrade
|
ok, good to know, I will just stay on the group then. I got my machines in, I think 2007. They both work well, but you never know when something will become a problem. I have never needed to upgrade
|
By
a67skc70
·
#28095
·
|
|
Re: Janome 300E
Welcome Linda. Back in the days when this group lived on Yahoo, there was a 300E specific group, but I don't know if it exists any more. However, unlike politics, this group is pretty much
|
Welcome Linda. Back in the days when this group lived on Yahoo, there was a 300E specific group, but I don't know if it exists any more. However, unlike politics, this group is pretty much
|
By
Jim Stutsman
·
#28094
·
|
|
Re: DIY - make your own magnetic hoop for the 15000 using the GR hoop
Thanks Diane and Jim for the video. I've linked in all the supplies so when we get resettled in our new home, I can order and try what Diane has done. I've not had a hard time with the included hoop
|
Thanks Diane and Jim for the video. I've linked in all the supplies so when we get resettled in our new home, I can order and try what Diane has done. I've not had a hard time with the included hoop
|
By
juliadlf.ny@...
·
#28093
·
|
|
Janome 300E
I joined this group thinking it was something that could help me with my Janome 300E embroidery machines when I run into a problem. But I have noticed that the machines you are talking about are
|
I joined this group thinking it was something that could help me with my Janome 300E embroidery machines when I run into a problem. But I have noticed that the machines you are talking about are
|
By
a67skc70
·
#28092
·
|
|
Re: Auto threader for Janome 11k special edition
The part you need is item 15 in the photo. We used to order batches of them. However at some point they stopped sending the individual plates and instead sent parts 14 & 15 already assembled. That
|
The part you need is item 15 in the photo. We used to order batches of them. However at some point they stopped sending the individual plates and instead sent parts 14 & 15 already assembled. That
|
By
Jim Stutsman
·
#28091
·
|
|
Auto threader for Janome 11k special edition
I know this has been addressed many times before, but I was not able to find any information on the Janome 11000 special edition concerning the threader. All I would like to find out is what is the
|
I know this has been addressed many times before, but I was not able to find any information on the Janome 11000 special edition concerning the threader. All I would like to find out is what is the
|
By
Prudience Lewis
·
#28090
·
|
|
Re: DIY - make your own magnetic hoop for the 15000 using the GR hoop
Thank you. I was trying to figure something out for the GR hoop. Really wanted the larger quilting area. Hope you both are well. Still think of you every time I drive down Gaylord
|
Thank you. I was trying to figure something out for the GR hoop. Really wanted the larger quilting area. Hope you both are well. Still think of you every time I drive down Gaylord
|
By
georgebarbara1218@att.net
·
#28089
·
|
|
DIY - make your own magnetic hoop for the 15000 using the GR hoop
Here's the video: https://youtu.be/DV9bDAYHOQg
Parts required are listed in the video description, repeated here for your convenience. Have fun!
Parts from Amazon:
Mending braces
Magnets
Gaffer
|
Here's the video: https://youtu.be/DV9bDAYHOQg
Parts required are listed in the video description, repeated here for your convenience. Have fun!
Parts from Amazon:
Mending braces
Magnets
Gaffer
|
By
Jim Stutsman
·
#28088
·
Edited
|
|
Re: Skipped stitches with Janome M7
I'll try that, thanks!
By
Barbara Bailey <barbarabailey4gk@...>
·
#28087
·
|
|
Re: Skipped stitches with Janome M7
One thing you might try and that is to thread the machine using both parts at the thread stand - it means that you have to loop the thread around the top. It just adds a little extra tension. I’ve
|
One thing you might try and that is to thread the machine using both parts at the thread stand - it means that you have to loop the thread around the top. It just adds a little extra tension. I’ve
|
By
Cheryl Paul
·
#28086
·
|
|
Re: Quilt topper
Can't wait to see Diane's creation for the GR.
On Sunday, February 7, 2021, 11:08:32 AM PST, Jim Stutsman via groups.io <onlinesewing@...>
|
Can't wait to see Diane's creation for the GR.
On Sunday, February 7, 2021, 11:08:32 AM PST, Jim Stutsman via groups.io <onlinesewing@...>
|
By
saba_cat2
·
#28085
·
|
|
Re: Janome 6000 belt change
Your best hope for the belt may be a grizzled dealer fighting against retirement. The 6000 goes back quite a ways - it was on its way out when we started in 1987. Janome typically does not keep parts
|
Your best hope for the belt may be a grizzled dealer fighting against retirement. The 6000 goes back quite a ways - it was on its way out when we started in 1987. Janome typically does not keep parts
|
By
Jim Stutsman
·
#28084
·
|
|
How much do you charge for an embroidered Karate Belt??
The world of embroidery has a new book to address many many questions of HOW to help the rookie and/or professional needle jockeys. Welcome to the BIBLE – Basic Information Before Learning
|
The world of embroidery has a new book to address many many questions of HOW to help the rookie and/or professional needle jockeys. Welcome to the BIBLE – Basic Information Before Learning
|
By
Jim Serritella
·
#28083
·
|
