|
Re: design?
I have a Gnome for the holidays design from Julia’s Needle Designs, here’s the link
https://www.juliasneedledesigns.com/GnomeForHolidays.html
Embroidery Library and Urban Threads also have Gnome
|
I have a Gnome for the holidays design from Julia’s Needle Designs, here’s the link
https://www.juliasneedledesigns.com/GnomeForHolidays.html
Embroidery Library and Urban Threads also have Gnome
|
By
Estelle Torpy
·
#26546
·
|
|
Re: Stitch Anatomy
I may be totally wrong, but I think in machines that have zigzag capability the straight stitch is actually a very widened out zigzag. My Singer from 1948 is straight stitch only and you can really
|
I may be totally wrong, but I think in machines that have zigzag capability the straight stitch is actually a very widened out zigzag. My Singer from 1948 is straight stitch only and you can really
|
By
Mary E
·
#26545
·
|
|
Stitch Anatomy
i am wondering about the anatomy of a stitch. my machines seem to make a stitch that starts on the top left and ends to the right, just by a thread width. then the next one starts just the left of
|
i am wondering about the anatomy of a stitch. my machines seem to make a stitch that starts on the top left and ends to the right, just by a thread width. then the next one starts just the left of
|
By
Nyssa Lanzafame
·
#26544
·
|
|
design?
Wondering…..I found a gnome design that was “Gnome for the Holidays”.
I cannot find it in my designs and don’t have a clue where I saw it to redownload it.
Any suggestions? Your help is
|
Wondering…..I found a gnome design that was “Gnome for the Holidays”.
I cannot find it in my designs and don’t have a clue where I saw it to redownload it.
Any suggestions? Your help is
|
By
Joyce Daniel
·
#26543
·
|
|
Re: Needles for threader
Hi Vicki: If the screw is loosened enough ..... not so loose it falls out but just a bit more than needed for the old needle to slide out .... and you push the needle up as far as you can .... it is
|
Hi Vicki: If the screw is loosened enough ..... not so loose it falls out but just a bit more than needed for the old needle to slide out .... and you push the needle up as far as you can .... it is
|
By
HEATHER COWAN
·
#26542
·
|
|
Re: 6500P
Governor has a hefty fine for anyone caught doing anything in/near their shop. I do not know his home number.
|
Governor has a hefty fine for anyone caught doing anything in/near their shop. I do not know his home number.
|
By
vicki J. Wardwell <vjw_65@...>
·
#26541
·
|
|
lock machine
How do you lock a machine?
Vicki
|
How do you lock a machine?
Vicki
|
By
vicki J. Wardwell <vjw_65@...>
·
#26540
·
|
|
Re: Needles for threader
I have looked every where,
I insert my needle should all of the flat part be inside?
I have a dental mirror and can see but not sure if up all the way
would leave any
|
I have looked every where,
I insert my needle should all of the flat part be inside?
I have a dental mirror and can see but not sure if up all the way
would leave any
|
By
vicki J. Wardwell <vjw_65@...>
·
#26539
·
|
|
Re: Sewing on bra hooks
The HD roller foot is perfect. It stitches next to the hooks and the roller keeps it moving evenly.
|
The HD roller foot is perfect. It stitches next to the hooks and the roller keeps it moving evenly.
|
By
Diane Stutsman
·
#26538
·
|
|
Re: Sewing on bra hooks
I think I would email Bali and ask about a foot.
Let us know too.
Vicki
|
I think I would email Bali and ask about a foot.
Let us know too.
Vicki
|
By
vicki J. Wardwell <vjw_65@...>
·
#26537
·
|
|
6500P in shop
He said he would text me when it is ready he knows how badly she is needed.
Sorry, could not remove the excess text off this email.
Vicki
Do you know if cloth tortilla warmers are made like the potato
|
He said he would text me when it is ready he knows how badly she is needed.
Sorry, could not remove the excess text off this email.
Vicki
Do you know if cloth tortilla warmers are made like the potato
|
By
vjw_65@...
·
#26536
·
|
|
Re: 6500P
You should check to see if they do curb side pick up. He could still be at his shop fixing the machines.
|
You should check to see if they do curb side pick up. He could still be at his shop fixing the machines.
|
By
mah_jongg
·
#26535
·
|
|
Re: 5 thread stand holder #859430009
Yes it does. Works that for my 10000 but the 550e has to be screwed on.
Thanks
|
Yes it does. Works that for my 10000 but the 550e has to be screwed on.
Thanks
|
By
mah_jongg
·
#26534
·
|
|
Re: 5 thread stand holder #859430009
Thank you. It worked.
By
mah_jongg
·
#26533
·
|
|
Re: Sewing on bra hooks
Thank you to everyone who replied - I was relieved to know that I am not the only person who finds this step tricky. I believe that there are special feet for the "trade" ie people using industrial
|
Thank you to everyone who replied - I was relieved to know that I am not the only person who finds this step tricky. I believe that there are special feet for the "trade" ie people using industrial
|
By
Anne Stoye
·
#26532
·
|
|
Re: Bobbin Winder Spindle
Thank you, Jim and Vikki. My husband was able to pull it up, but didn’t have to take it off completely. Cleaned out the thread, clicked it back down, and now back in business.
And, Jim, I’m so
|
Thank you, Jim and Vikki. My husband was able to pull it up, but didn’t have to take it off completely. Cleaned out the thread, clicked it back down, and now back in business.
And, Jim, I’m so
|
By
Carole Hollmann
·
#26531
·
|
|
Re: 5 thread stand holder #859430009
The actual installation starts at about 1:00 min. She's speaking an Asian language, but her demo is spot on. You don't need additional screws, just loosen the ones in the machine enough to slide the
|
The actual installation starts at about 1:00 min. She's speaking an Asian language, but her demo is spot on. You don't need additional screws, just loosen the ones in the machine enough to slide the
|
By
blue_lak
·
#26530
·
|
|
Re: 5 thread stand holder #859430009
Does your thread stand have about a 6 inch metal bracket that fits over the handle? That is how mine attaches and I am quite pleased with how well it works.
The two thread that I had before and now
|
Does your thread stand have about a 6 inch metal bracket that fits over the handle? That is how mine attaches and I am quite pleased with how well it works.
The two thread that I had before and now
|
By
Patricia Ward
·
#26529
·
|
|
Re: Bobbin Winder Spindle
You can pull the bobbin winder ”flat bed” up over the spindle – it takes a bit of force, but once done, you will know how to do it the next time. Then just remove the threads by either cutting
|
You can pull the bobbin winder ”flat bed” up over the spindle – it takes a bit of force, but once done, you will know how to do it the next time. Then just remove the threads by either cutting
|
By
Vikki Youngmeyer
·
#26528
·
|
|
5 thread stand holder #859430009
Just bought this 5 thread stand holder for my 550e. Cannot figure out how to install it on the machine. Took out one screw (closest to tension guide) and the screw is to short to do anything. Thread
|
Just bought this 5 thread stand holder for my 550e. Cannot figure out how to install it on the machine. Took out one screw (closest to tension guide) and the screw is to short to do anything. Thread
|
By
mah_jongg
·
#26527
·
|
