|
Re: Ghost Rider
Speaking of replacing a foot control when the electronics give out.
When my antique (ok, only 1974) Kenmore foot control quit, I pried it apart and noticed a lovely collection of capacitors,
|
Speaking of replacing a foot control when the electronics give out.
When my antique (ok, only 1974) Kenmore foot control quit, I pried it apart and noticed a lovely collection of capacitors,
|
By
Pat
·
#20121
·
|
|
Re: AccuDesign, AccuSetter, etc.
Could you explain how this topper would be used?
Connie S.
|
Could you explain how this topper would be used?
Connie S.
|
By
Connie
·
#20120
·
|
|
Re: AccuDesign, AccuSetter, etc.
Oh, I see. If you select the 220mm x 220 mm size Janome 15000 shows up. For $49.99 plus shipping I think I’ll make my own frame. I already have the magnets and the hoop. They are inexpensive on
|
Oh, I see. If you select the 220mm x 220 mm size Janome 15000 shows up. For $49.99 plus shipping I think I’ll make my own frame. I already have the magnets and the hoop. They are inexpensive on
|
By
Cas <cas@...>
·
#20119
·
|
|
Ghost Rider
I haven't seen this question before so here goes... When I let off of the foot pedal my 15000 sometimes continues to sew, sometime for a couple stitches and sometimes continues until I tap it. Any
|
I haven't seen this question before so here goes... When I let off of the foot pedal my 15000 sometimes continues to sew, sometime for a couple stitches and sometimes continues until I tap it. Any
|
By
Lucy Fino
·
#20118
·
|
|
Viewing the graphic when opening designs
I’m having trouble viewing the designs in a graphic. I remember there was a way to view them and not the “D” or the flower but for the life of me, I can’t find the answer anywhere.
I have
|
I’m having trouble viewing the designs in a graphic. I remember there was a way to view them and not the “D” or the flower but for the life of me, I can’t find the answer anywhere.
I have
|
By
Sharon Simmons
·
#20117
·
|
|
Re: AccuDesign, AccuSetter, etc.
Or, try this website:
http://www.sewingmachinesplus.com/dime-quilt-trooper-janome.php
- Cat (FL)
|
Or, try this website:
http://www.sewingmachinesplus.com/dime-quilt-trooper-janome.php
- Cat (FL)
|
By
Cat - N
·
#20116
·
|
|
Re: AccuDesign, AccuSetter, etc.
Thanks.
Barbara Wolcott
barb2220@...
|
Thanks.
Barbara Wolcott
barb2220@...
|
By
Barbara <barb2220@...>
·
#20115
·
|
|
Re: AccuDesign, AccuSetter, etc.
Check it out here and go to the bottom of the page and choose 220mm by 220mm hoop. It will show it's for the 12,000, 14,000, and 15,000 with the acufil
|
Check it out here and go to the bottom of the page and choose 220mm by 220mm hoop. It will show it's for the 12,000, 14,000, and 15,000 with the acufil
|
By
Ceil J
·
#20114
·
|
|
Re: AccuDesign, AccuSetter, etc.
I think you mean the DIME (Designs in Machine Embroidery) hoop topper? The answer is no. It is only for the ASQ22 hoop, not the SQ23 hoop. The ASQ22 (Acufil Square) is a one part hoop with a metal rim
|
I think you mean the DIME (Designs in Machine Embroidery) hoop topper? The answer is no. It is only for the ASQ22 hoop, not the SQ23 hoop. The ASQ22 (Acufil Square) is a one part hoop with a metal rim
|
By
favymtz
·
#20113
·
|
|
Re: Reducing design density
Sue, send me the design. I'll do it for you for 5 and send you design back.
GINGER
WWW.STITCHEDINFAITH.COM
Custom embroidery and stock designs
|
Sue, send me the design. I'll do it for you for 5 and send you design back.
GINGER
WWW.STITCHEDINFAITH.COM
Custom embroidery and stock designs
|
By
Ginger Benckert <stitchedinfaith@...>
·
#20112
·
|
|
Updated MC12000 to use RE18 Hoop
Need some assistance, please.
I purchased the new RE18 Hoop and to use it I have:
1. updated my MC12000
2. updated my Digitizer MBX software to V4.0M
3. downloaded the Horizon Link V1.20 but need
|
Need some assistance, please.
I purchased the new RE18 Hoop and to use it I have:
1. updated my MC12000
2. updated my Digitizer MBX software to V4.0M
3. downloaded the Horizon Link V1.20 but need
|
By
lisawelch52@...
·
#20111
·
|
|
Reducing design density
I need to reduce the density of a design to stitch it on a t-shirt, but don't know how. My software can do it, but it doesn't give any guidelines. I don't want to spend hours figuring it out. The
|
I need to reduce the density of a design to stitch it on a t-shirt, but don't know how. My software can do it, but it doesn't give any guidelines. I don't want to spend hours figuring it out. The
|
By
susies.stitches@...
·
#20110
·
|
|
Re: AccuDesign, AccuSetter, etc.
Can the dome hoop be s
Used on the Elba 920, it has a SQ23
Sent from my iPhone
|
Can the dome hoop be s
Used on the Elba 920, it has a SQ23
Sent from my iPhone
|
By
Liz Borgman
·
#20109
·
|
|
AccuDesign, AccuSetter, etc.
Can any of these products be used by the MC14000? It doesn't have Wi-Fi, but can the files be saved and transferred by a different method?
|
Can any of these products be used by the MC14000? It doesn't have Wi-Fi, but can the files be saved and transferred by a different method?
|
By
jpkenyon@...
·
#20108
·
|
|
Re: DIME Snap Hoops
I have the DIME Hoop Topper which fits on the ASQ22 hoop. It consists of a plastic frame and 12 very strong magnets that take the place of the magnets that come with the ASQ hoop. I used the hoop to
|
I have the DIME Hoop Topper which fits on the ASQ22 hoop. It consists of a plastic frame and 12 very strong magnets that take the place of the magnets that come with the ASQ hoop. I used the hoop to
|
By
favymtz
·
#20107
·
|
|
Re: DIME Embroidery Snap Hoops and ? of New Ruler foot
I've been told by my local Brother Dealer that DIME does make a 5 X 7 magnetice hook for the MC15000.. Been waiting 5 months to get it, so I'm beginning to doubt her just a bit!
|
I've been told by my local Brother Dealer that DIME does make a 5 X 7 magnetice hook for the MC15000.. Been waiting 5 months to get it, so I'm beginning to doubt her just a bit!
|
By
ANTHONY A COLEY <coleyct@...>
·
#20106
·
|
|
Re: DIME Embroidery Snap Hoops and ? of New Ruler foot
No. I wish they would make one. They do make a snap hoop for the multiple needle Janome embroidery machine but none for the 12000 or 15000. I’ve often thought of making my own somehow. I have
|
No. I wish they would make one. They do make a snap hoop for the multiple needle Janome embroidery machine but none for the 12000 or 15000. I’ve often thought of making my own somehow. I have
|
By
Cas <cas@...>
·
#20105
·
|
|
Re: DIME Snap Hoops
I have the Janice Quilt Topper. It is made of flimsy plastic. The magnets are quite strong. It is okay, but I am not really impressed. I had hoped they would have made a snap hoop for the MC15000,
|
I have the Janice Quilt Topper. It is made of flimsy plastic. The magnets are quite strong. It is okay, but I am not really impressed. I had hoped they would have made a snap hoop for the MC15000,
|
By
Joyce Golden
·
#20104
·
|
|
Re: JANOME RULER FOOT
Don't forget the Accessory catalog, available to download (free) from Janome's websites (I found it easily on Global. http://www.janome.co.jp/e1.htmI
Just click on the word Accessories (left side
|
Don't forget the Accessory catalog, available to download (free) from Janome's websites (I found it easily on Global. http://www.janome.co.jp/e1.htmI
Just click on the word Accessories (left side
|
By
Pat
·
#20103
·
|
|
DIME Snap Hoops
Correction. I just looked at their website and they now have something called the Janome Quilt Topper that is supposed to work with the Accufil hoop. Not sure how it works, but maybe it is the same
|
Correction. I just looked at their website and they now have something called the Janome Quilt Topper that is supposed to work with the Accufil hoop. Not sure how it works, but maybe it is the same
|
By
J Fraker
·
#20102
·
|
