|
Re: Connectivity with 15K and ipad
I have successfully contacted Terry w/Janome at: tech_support@....
Good luck.
I have successfully contacted Terry w/Janome at: tech_support@....
Good luck.
|
By
barb2220@...
·
#18327
·
|
|
Re: Connectivity with 15K and ipad
lol, if I had a modem . . . la la la
I have centurylink ISP and Dish network. I have a modemfrom Centurylink, it’s a ZyXel model and seems very cheap. It’s beenreplaced twice. It works by
lol, if I had a modem . . . la la la
I have centurylink ISP and Dish network. I have a modemfrom Centurylink, it’s a ZyXel model and seems very cheap. It’s beenreplaced twice. It works by
|
By
cas <cas@...>
·
#18321
·
|
|
Re: Connectivity with 15K and ipad
[If I had a modem, I'd modem in the morning, I'd modem in the evening, all over this land!]
With Dish network it's likely that you have a modem and router combined into one device. Buying your own
[If I had a modem, I'd modem in the morning, I'd modem in the evening, all over this land!]
With Dish network it's likely that you have a modem and router combined into one device. Buying your own
|
By
Jim Stutsman
·
#18320
·
|
|
Re: Connectivity with 15K and ipad
Thanks for all the info Jim,
Can I buy my own modem and program it to only see myconnection? My modem sees several of the neighbors, it shows them whetherthey are secured or unsecured. I didn’t
Thanks for all the info Jim,
Can I buy my own modem and program it to only see myconnection? My modem sees several of the neighbors, it shows them whetherthey are secured or unsecured. I didn’t
|
By
cas <cas@...>
·
#18318
·
|
|
Re: Connectivity with 15K and ipad
[WiFi - can you hear me now?]
WiFi is assumed by most folks to be the same as an ethernet connection but without the wires. That's not quite how it works. You need to be aware that WiFi is radio, and
[WiFi - can you hear me now?]
WiFi is assumed by most folks to be the same as an ethernet connection but without the wires. That's not quite how it works. You need to be aware that WiFi is radio, and
|
By
Jim Stutsman
·
#18317
·
|
|
Re: Connectivity with 15K and ipad
I have had a similar problem. My issue is my PC internetwon’t work if I have my sewing machine wi-fi on. The sewing machine and PC arein the same room as the router and the DSL jack. My Wi-Fi
I have had a similar problem. My issue is my PC internetwon’t work if I have my sewing machine wi-fi on. The sewing machine and PC arein the same room as the router and the DSL jack. My Wi-Fi
|
By
cas <cas@...>
·
#18316
·
|
|
Re: Connectivity with 15K and ipad
Thanks for response. I have already gone the cycle of unplugging and replugging the router, plus uninstalling and reinstalling the AcuDesign app.
I don't understand why for months/days everything is
Thanks for response. I have already gone the cycle of unplugging and replugging the router, plus uninstalling and reinstalling the AcuDesign app.
I don't understand why for months/days everything is
|
By
Jo Smoker
·
#18315
·
|
|
hasp srm run-time error H0033
I loaded my final download on my new windows 10 laptop. I did the upgrade for windows 10. My MBX 4.0 software worked fine the first few times. Now I'm getting the above error message. Help.
[Deja
I loaded my final download on my new windows 10 laptop. I did the upgrade for windows 10. My MBX 4.0 software worked fine the first few times. Now I'm getting the above error message. Help.
[Deja
|
By
bdake@sbcglobal.net
·
#18313
·
|
|
Connectivity with 15K and ipad
I have been using my ipad with Acudesign app with my 15K since last March and have had absolutely no problems. Last week I could not access my sewing machine. When I went to export, ( as I have done
I have been using my ipad with Acudesign app with my 15K since last March and have had absolutely no problems. Last week I could not access my sewing machine. When I went to export, ( as I have done
|
By
Jo Smoker
·
#18312
·
|
|
Re: USB DRIVES & EMBROIDERY PROGRAMS & Embroidery unit
Hi, Sue. I'm not sure I do applique correctly unless it's an in-the-hoop project and I haven't screwed one of those up...yet.
I've been working on a large project that if I had been going to do it
Hi, Sue. I'm not sure I do applique correctly unless it's an in-the-hoop project and I haven't screwed one of those up...yet.
I've been working on a large project that if I had been going to do it
|
By
Lou Ann
·
#18314
·
|
|
Re: FAVORITE STITCH
See page 86 in manual and choose #2, Ordinary Sewing Mode. Scroll through options to the Favorite Stitch Adjustment and make sure it's turned On. See page 93 and it tells you which stitches it works
See page 86 in manual and choose #2, Ordinary Sewing Mode. Scroll through options to the Favorite Stitch Adjustment and make sure it's turned On. See page 93 and it tells you which stitches it works
|
By
blue_lak <no_reply@...>
·
#18310
·
|
|
Re: USB DRIVES & EMBROIDERY PROGRAMS & Embroidery unit
If it isn't an applique design, how will I get it to stay attached? I've done that with applique designs where I've stitched the outline, and then did the final stitching on the actual fabric. It's
If it isn't an applique design, how will I get it to stay attached? I've done that with applique designs where I've stitched the outline, and then did the final stitching on the actual fabric. It's
|
By
Sue Raabe <susies.stitches@...>
·
#18309
·
|
|
Re: FAVORITE STITCH
It's so much easier than on the instructions for the 7700! Once you have turned the FAVORITE STITCH adjustment on in SETTINGS then when you select any of the stitches that are capable of being
It's so much easier than on the instructions for the 7700! Once you have turned the FAVORITE STITCH adjustment on in SETTINGS then when you select any of the stitches that are capable of being
|
By
favymtz
·
#18311
·
|
|
Re: Updating My 12000
Hi… Finally got around to updating the “My 12000” App on my iPad. It shows the “update” button but when I touch the button it briefly swirls around and then goes back to showing the
Hi… Finally got around to updating the “My 12000” App on my iPad. It shows the “update” button but when I touch the button it briefly swirls around and then goes back to showing the
|
By
Margaret Wilburn
·
#18308
·
|
|
FAVORITE STITCH
I've been searching online for a way to save the settings I like for a specific stitch on my MC12000. I hate having to reset the applique settings I like each time I start a new applique.
I found
I've been searching online for a way to save the settings I like for a specific stitch on my MC12000. I hate having to reset the applique settings I like each time I start a new applique.
I found
|
By
brittisl1018@...
·
#18307
·
|
|
Re: Help please
Thanks to you who sent messages to help.
I took my machine to the dealer when my favorite,
most helpful person was there. She worked and worked
and finally the machine came one. Yay!! The only
Thanks to you who sent messages to help.
I took my machine to the dealer when my favorite,
most helpful person was there. She worked and worked
and finally the machine came one. Yay!! The only
|
By
Joyce VanAtta
·
#18306
·
|
|
Re: Windows 10 and Horizon Link
Sounds so encouraging!
Sent from my iPhone
Sounds so encouraging!
Sent from my iPhone
|
By
Linda <lindamrobertson7@...>
·
#18305
·
|
|
Re: Windows 10 and Horizon Link
No, it's every single design, whether built in or from someone else. I've tried designs from Anita Goodesign, EmbLibrary, designs I've used successfully before Windows 10.
[The worst Windows
No, it's every single design, whether built in or from someone else. I've tried designs from Anita Goodesign, EmbLibrary, designs I've used successfully before Windows 10.
[The worst Windows
|
By
Vickie
·
#18304
·
|
|
Re: USB DRIVES & EMBROIDERY PROGRAMS & Embroidery unit
Sue, Stitch the butterfly out on nylon mesh stabilizer, just right on the stabilizer and then cut it out and applique it right where you want it to go.
I have the Bernina Software, Perfect Embroidery
Sue, Stitch the butterfly out on nylon mesh stabilizer, just right on the stabilizer and then cut it out and applique it right where you want it to go.
I have the Bernina Software, Perfect Embroidery
|
By
marjackpot@yahoo.com
·
#18303
·
|
|
Windows 10 and Horizon Link
I'm running a virtual machine on my Mac (El Capitan 10.11.4) using VM Ware Fusion (8.1.0) and Windows 10 v1511. Every time I open Horizon Link (1.20) [Editing Embroidery Designs] and load a design it
I'm running a virtual machine on my Mac (El Capitan 10.11.4) using VM Ware Fusion (8.1.0) and Windows 10 v1511. Every time I open Horizon Link (1.20) [Editing Embroidery Designs] and load a design it
|
By
Vickie
·
#18301
·
|