|
Re: Installing Acutools
Sue,
Not sure if this applies to you, but when I upgraded from Customizer 11000 v.1.3 to v.1.5, there was an upgrade at this site:
http://www.janome.co.jp/e/e_downloads/software.html
...that
|
Sue,
Not sure if this applies to you, but when I upgraded from Customizer 11000 v.1.3 to v.1.5, there was an upgrade at this site:
http://www.janome.co.jp/e/e_downloads/software.html
...that
|
By
Cat - N
·
#17679
·
|
|
Foot petal not working
I am a new owner of a 15000. In trying it out, I've run into a problem. The foot petal doesn't seem to be working. I've trying unplugging it and plugging it back in again. I've made sure it's plugged
|
I am a new owner of a 15000. In trying it out, I've run into a problem. The foot petal doesn't seem to be working. I've trying unplugging it and plugging it back in again. I've made sure it's plugged
|
By
Lynn Fisher
·
#17678
·
|
|
Re: Installing Acutools
Thank you so much. You're right it was called MCTools, I believe. When she wrote AcuTools it clicked, but wrongly.
So glad you figured out what I was asking as I didn't word it exactly right, but I
|
Thank you so much. You're right it was called MCTools, I believe. When she wrote AcuTools it clicked, but wrongly.
So glad you figured out what I was asking as I didn't word it exactly right, but I
|
By
Sue Watts <suewatts12@...>
·
#17677
·
|
|
Re: Machine stops and starts
I'm not surprised and was leaning toward bugs in the software. Thanks, again Jim. Too bad expertise doesn't work in the check out line:)
The most thoroughly wasted of all days is that on which
|
I'm not surprised and was leaning toward bugs in the software. Thanks, again Jim. Too bad expertise doesn't work in the check out line:)
The most thoroughly wasted of all days is that on which
|
By
Lou Ann
·
#17676
·
|
|
Re: Installing Acutools
Hi, I'm new here, been reading and learning. I also have Accutools for my 11000, which was installed and working fine. Then I was told there was an update and it stated to delete the old one and
|
Hi, I'm new here, been reading and learning. I also have Accutools for my 11000, which was installed and working fine. Then I was told there was an update and it stated to delete the old one and
|
By
suewatts12@...
·
#17675
·
|
|
Installing Acutools
I had installed Acutools on my computer and I was having trouble with it so I decided to uninstall the program and reinstall. Bad move! When I tried to reinstall, either the disc had gone bad or my
|
I had installed Acutools on my computer and I was having trouble with it so I decided to uninstall the program and reinstall. Bad move! When I tried to reinstall, either the disc had gone bad or my
|
By
Ann
·
#17674
·
|
|
Machine stops and starts
Jim, I believe this one is for you. Is there any reason you know of that the MC12000 would stop in the middle of a 5 inch, straight line, 6 mm wide satin stitch? I've been making in-the-hoop
|
Jim, I believe this one is for you. Is there any reason you know of that the MC12000 would stop in the middle of a 5 inch, straight line, 6 mm wide satin stitch? I've been making in-the-hoop
|
By
Lou Ann
·
#17673
·
|
|
Re: Version 5 activations
Jim
Am I understanding correctly what you are saying?
If I have installed it on 3 computers - then have an issue with one computer and manage to uninstall before the system dies, the uninstall updates
|
Jim
Am I understanding correctly what you are saying?
If I have installed it on 3 computers - then have an issue with one computer and manage to uninstall before the system dies, the uninstall updates
|
By
Anne Parker
·
#17672
·
|
|
Re: Sulky Puffy Foam Disaster
Thanks for the feedback.
Sent from Mail for Windows 10
|
Thanks for the feedback.
Sent from Mail for Windows 10
|
By
Pam Davison
·
#17671
·
|
|
Version 5 activations
Good Morning,
I know that we get 3 activations of Digitizer V5. My question is: If we uninstall for any reason, does the activation go back on the shelf so that we still have 3 or do we have to
|
Good Morning,
I know that we get 3 activations of Digitizer V5. My question is: If we uninstall for any reason, does the activation go back on the shelf so that we still have 3 or do we have to
|
By
Cheryl Paul
·
#17670
·
|
|
Re: 12000 Machine for Sale
Sue: There is a group on Facebook called "Janome Owners Like Us" which there is a pinned post within the group where you can list your used Janome machines,etc For Sale. I wasn't sure if you've tried
|
Sue: There is a group on Facebook called "Janome Owners Like Us" which there is a pinned post within the group where you can list your used Janome machines,etc For Sale. I wasn't sure if you've tried
|
By
juliadlf1 <no_reply@...>
·
#17669
·
|
|
Re: question on DEACTIVATION
Thanks, Jim,
SueR
---In janome12000@..., <srevere@...> wrote :
Jim,
If we uninstall to deactivate Digitizer V5, will the uninstall create any problems with the Corel as with the previous versions? Am
|
Thanks, Jim,
SueR
---In janome12000@..., <srevere@...> wrote :
Jim,
If we uninstall to deactivate Digitizer V5, will the uninstall create any problems with the Corel as with the previous versions? Am
|
By
srevere@...
·
#17668
·
|
|
Re: Sulky Puffy Foam Disaster
Thanks for the info.
In any case I am done with that particular software - it doesn't create "good" JEF files (not just puffy foam) which is why I stopped using it when I sold my pfaff.
It creates
|
Thanks for the info.
In any case I am done with that particular software - it doesn't create "good" JEF files (not just puffy foam) which is why I stopped using it when I sold my pfaff.
It creates
|
By
Pam Davison
·
#17667
·
|
|
question on DEACTIVATION
Jim,
If we uninstall to deactivate Digitizer V5, will the uninstall create any problems with the Corel as with the previous versions? Am in a situation where I may have to uninstall on my SurfacePro4
|
Jim,
If we uninstall to deactivate Digitizer V5, will the uninstall create any problems with the Corel as with the previous versions? Am in a situation where I may have to uninstall on my SurfacePro4
|
By
srevere@...
·
#17666
·
|
|
Re: 12000 Machine for Sale
Sue, did you ask around at other dealers to see what type ofdeal they would give you? Many will give a pretty good trade-in price andsome deal with Synchrony finance which often has 60 months
|
Sue, did you ask around at other dealers to see what type ofdeal they would give you? Many will give a pretty good trade-in price andsome deal with Synchrony finance which often has 60 months
|
By
cas <cas@...>
·
#17665
·
|
|
Re: Sulky Puffy Foam Disaster
Before stitching on puffy foam it is necessary to raise the footheight. For some reason the sensor foot does not “feel” the extrathickness of the puffy foam.
Change the foot height to 2.0 using
|
Before stitching on puffy foam it is necessary to raise the footheight. For some reason the sensor foot does not “feel” the extrathickness of the puffy foam.
Change the foot height to 2.0 using
|
By
Donna Morton
·
#17664
·
|
|
Re: 12000 Machine for Sale
I attended the Jenny Haskins 2 day event where we had the chance to try out the 15000. The differences were things that made it easier for me, but may not make a difference to everyone. I really
|
I attended the Jenny Haskins 2 day event where we had the chance to try out the 15000. The differences were things that made it easier for me, but may not make a difference to everyone. I really
|
By
Sue Raabe <susies.stitches@...>
·
#17663
·
|
|
Re: Sulky Puffy Foam Disaster
Pam,
You are not the only one that has had problems with editing and converting design files to .JEF format using the 6D and Premier+ software. My wife and I had nothing but problems with the
|
Pam,
You are not the only one that has had problems with editing and converting design files to .JEF format using the 6D and Premier+ software. My wife and I had nothing but problems with the
|
By
Mike Adams
·
#17661
·
|
|
Re: 12000 Machine for Sale
Thanks for the advice, and also that this list isn't the place to list it. Sometimes I overlook the obvious . I was focusing on where to try selling it. I didn't realize the 12000 is 5 years old.
|
Thanks for the advice, and also that this list isn't the place to list it. Sometimes I overlook the obvious . I was focusing on where to try selling it. I didn't realize the 12000 is 5 years old.
|
By
Sue Raabe <susies.stitches@...>
·
#17662
·
|
|
Re: twin needle embroidery
Be really careful and don't use the single needle hole plate on the 12 or 15 when using the offset twin needle, it barely fits into the hole.(I just checked it with one that I have) and just like when
|
Be really careful and don't use the single needle hole plate on the 12 or 15 when using the offset twin needle, it barely fits into the hole.(I just checked it with one that I have) and just like when
|
By
janetpiekarski
·
#17659
·
|
