|
Re: When buying a 15000
In UK when you buy from a show you have to nominate a local dealer as 'your dealer'. That dealer then gets the commission for the sale even though you haven't bought from them and they are committed
|
In UK when you buy from a show you have to nominate a local dealer as 'your dealer'. That dealer then gets the commission for the sale even though you haven't bought from them and they are committed
|
By
Anne Parker
·
#16059
·
|
|
Re: Throwing out previous versions of Digitizer?
Thank you Jim! X
Sent from my iPad
|
Thank you Jim! X
Sent from my iPad
|
By
Judy Jackson <judy.j282@...>
·
#16058
·
|
|
Throwing out previous versions of Digitizer?
Just need confirmation that I can throw out my previous versions of Digitizer. I started with Digitizer Pro, upgraded to MBXv4 then to v4.5 and now have upgraded once again to MBX v5. If I throw out,
|
Just need confirmation that I can throw out my previous versions of Digitizer. I started with Digitizer Pro, upgraded to MBXv4 then to v4.5 and now have upgraded once again to MBX v5. If I throw out,
|
By
judy.j282@...
·
#16057
·
|
|
Re: When buying a 15000
I do an embroidery class for my dealer - it is a day away for us ladies!! I have learned so much froM all!
We have had a few friends of some ladies buy a machine or cutter at the Houston show - then
|
I do an embroidery class for my dealer - it is a day away for us ladies!! I have learned so much froM all!
We have had a few friends of some ladies buy a machine or cutter at the Houston show - then
|
By
Kaye Lessard
·
#16056
·
|
|
Re: Scan and Cut with 15000
Hi Cas,
I have the Artistic Edge and it will cut 15” up to 30” in length. The 15” square comes with the Artistic Edge Cutter in a high sticky mat for fabric and a low sticky for paper and
|
Hi Cas,
I have the Artistic Edge and it will cut 15” up to 30” in length. The 15” square comes with the Artistic Edge Cutter in a high sticky mat for fabric and a low sticky for paper and
|
By
Cheryl Paul
·
#16054
·
|
|
Re: When buying a 15000
I don't go there often, but I have seen several dealers on eBay. That surprised me at first, but it makes sense. It is another sales outlet and it gets a lot of traffic.
It sounds like you got a
|
I don't go there often, but I have seen several dealers on eBay. That surprised me at first, but it makes sense. It is another sales outlet and it gets a lot of traffic.
It sounds like you got a
|
By
Cat - N
·
#16053
·
|
|
Re: When buying a 15000
You're very kind, thank you, Cas. I will check some more...probably not until I get back from D.C., though. I am not at all knowledgeable who to watch 'in the business' for things like this, so I
|
You're very kind, thank you, Cas. I will check some more...probably not until I get back from D.C., though. I am not at all knowledgeable who to watch 'in the business' for things like this, so I
|
By
Cat - N
·
#16052
·
|
|
Re: En-even Surface Sewing
Thanks, Cas. I have seen this foot but what little scuttlebutt I've seen on it is that it is a bit touchy and fragile. Clever though! I am very happy with my Pfaff compensating foot on the 15000; it
|
Thanks, Cas. I have seen this foot but what little scuttlebutt I've seen on it is that it is a bit touchy and fragile. Clever though! I am very happy with my Pfaff compensating foot on the 15000; it
|
By
pble2000@...
·
#16050
·
|
|
Re: When buying a 15000
Although I have the 12000 and not the 15000, I just wanted wanted to share my experience of buying from a local dealer. Right after 15000 came out, I contacted my dealer and asked him to put me on a
|
Although I have the 12000 and not the 15000, I just wanted wanted to share my experience of buying from a local dealer. Right after 15000 came out, I contacted my dealer and asked him to put me on a
|
By
Sue Raabe <susies.stitches@...>
·
#16051
·
|
|
Re: When buying a 15000
I completely understand what you are saying, Pat, and that's all I want...a good working relationship...some place I can go that has greater technical expertise than me when I need it. I am pretty
|
I completely understand what you are saying, Pat, and that's all I want...a good working relationship...some place I can go that has greater technical expertise than me when I need it. I am pretty
|
By
Cat - N
·
#16049
·
|
|
Re: When buying a 15000
Judi,
First, thank you for the detailed information. Questions to ask are very important and I had not thought of many of those you mentioned. No taxes and free shipping to my door I had thought
|
Judi,
First, thank you for the detailed information. Questions to ask are very important and I had not thought of many of those you mentioned. No taxes and free shipping to my door I had thought
|
By
Cat - N
·
#16048
·
|
|
Re: Scan and Cut with 15000
Yes the Embrilliance Essentials is the lowest level of Embrilliance and it is now $139.99. I purchased it just for my Scan and Cut conversion to applique I own the Janome 12,000 (same as the 15,000
|
Yes the Embrilliance Essentials is the lowest level of Embrilliance and it is now $139.99. I purchased it just for my Scan and Cut conversion to applique I own the Janome 12,000 (same as the 15,000
|
By
Virginia
·
#16055
·
|
|
Re: Artistic SimpleCut First Project
You are welcome Julia! For others wondering where the embroidery and draw files are, the 200 X 200 block is available for download from the website of the store I teach
|
You are welcome Julia! For others wondering where the embroidery and draw files are, the 200 X 200 block is available for download from the website of the store I teach
|
By
Donna Morton
·
#16047
·
|
|
Re: When buying a 15000
You’re welcome Cat,
You can try calling dealers located near you to see if they are sponsoringany events where they provide the machines to sew on. Mine was a JennyHaskins event, but last time I
|
You’re welcome Cat,
You can try calling dealers located near you to see if they are sponsoringany events where they provide the machines to sew on. Mine was a JennyHaskins event, but last time I
|
By
cas <cas@...>
·
#16046
·
|
|
Re: Artistic SimpleCut First Project
The 15000 will read .dst files and .jef files. The Simple Cut software can convert any embroidery format into the jef file, however it cannot send it to a Brother Scan and Cut machine to cut,
Linda
|
The 15000 will read .dst files and .jef files. The Simple Cut software can convert any embroidery format into the jef file, however it cannot send it to a Brother Scan and Cut machine to cut,
Linda
|
By
Linda Rayburn
·
#16045
·
|
|
Re: When buying a 15000
I understand the dealer's position, but for me, I just couldn't afford that huge price. I have a 12000 that I bought from a dealer on eBay. It was a NEW machine; I wouldn't buy a used one off eBay.
|
I understand the dealer's position, but for me, I just couldn't afford that huge price. I have a 12000 that I bought from a dealer on eBay. It was a NEW machine; I wouldn't buy a used one off eBay.
|
By
J Fraker
·
#16044
·
|
|
Re: When buying a 15000
Thank you so much for the explanation. I appreciate your insight on this. I definitely don't want the local businesses harmed...it is hard enough to keep them here, and they were here before
|
Thank you so much for the explanation. I appreciate your insight on this. I definitely don't want the local businesses harmed...it is hard enough to keep them here, and they were here before
|
By
Cat - N
·
#16043
·
|
|
Re: When buying a 15000
Thank you, Cas.
Yes, and I have seen huge differences in pricing, too. That's why I was wondering how the price differences happen. I am not 'plugged in' to know if there are shows or anything
|
Thank you, Cas.
Yes, and I have seen huge differences in pricing, too. That's why I was wondering how the price differences happen. I am not 'plugged in' to know if there are shows or anything
|
By
Cat - N
·
#16042
·
|
|
Re: another AcuFil question
When you go into embroidery mode and find the hoops, try to page forward - the hoop should show up there IF you installed the update on the sewing machine.
Cheryl - Saskatoon
|
When you go into embroidery mode and find the hoops, try to page forward - the hoop should show up there IF you installed the update on the sewing machine.
Cheryl - Saskatoon
|
By
Cheryl Paul
·
#16041
·
|
|
Re: When buying a 15000
Well I have to add my few dollars to this....
When the 10000 was out I had a different dealer who really really really screwed up my machine. He was a Bernina and a Janome dealer ( well his wife
|
Well I have to add my few dollars to this....
When the 10000 was out I had a different dealer who really really really screwed up my machine. He was a Bernina and a Janome dealer ( well his wife
|
By
Patricia Ward
·
#16040
·
|
