|
|
5x7 hoop for 12000
question: Is there a way to find the newly installed 5x7 hoop on the 12000 janome....it doesn't list it on the hoop list...I did update to v. 1.20....
|
question: Is there a way to find the newly installed 5x7 hoop on the 12000 janome....it doesn't list it on the hoop list...I did update to v. 1.20....
|
By
fmacashley <no_reply@...>
·
#12704
·
|
|
Re: Dual foot wouldn't feed ...!?
Thanks so much everyone for those on paying MORE attention to engaging the lever.
I was following the manual instructions but you can see much better on the Help movie. Plus there is quite a
|
Thanks so much everyone for those on paying MORE attention to engaging the lever.
I was following the manual instructions but you can see much better on the Help movie. Plus there is quite a
|
By
Pru Joy
·
#12703
·
|
|
Re: Dual foot wouldn't feed ...!?
Just thought I'd mention there is a video on how to attach the dual feed holder in the help videos and in Horizon Link Suite - plus instructions in the manual on page 20.
It seems the manual either
|
Just thought I'd mention there is a video on how to attach the dual feed holder in the help videos and in Horizon Link Suite - plus instructions in the manual on page 20.
It seems the manual either
|
By
Anne Parker <annegparker@...>
·
#12702
·
|
|
Re: How to print template fr iPad apps?
Handyprint is for the Mac as that is what I use…don’t know if it is available for Windoze or not…(you can see my bias…)
Barb
|
Handyprint is for the Mac as that is what I use…don’t know if it is available for Windoze or not…(you can see my bias…)
Barb
|
By
Barb Engvall
·
#12700
·
|
|
Re: Dual foot wouldn't feed ...!?
Well I think I have found the reason for the dual feed foot not feeding my sandwich of fabrics - I hadn't properly attached the top lever.
I found this by reattaching the foot and this time ensuring
|
Well I think I have found the reason for the dual feed foot not feeding my sandwich of fabrics - I hadn't properly attached the top lever.
I found this by reattaching the foot and this time ensuring
|
By
Pru Joy
·
#12699
·
|
|
Re: How to print template fr iPad apps?
Not true, the printer has to be connected to your Mac, by WiFi, wired network, or USB. It will be shared using the mentioned apps like an AirPrint printer independent of its connection type. But of
|
Not true, the printer has to be connected to your Mac, by WiFi, wired network, or USB. It will be shared using the mentioned apps like an AirPrint printer independent of its connection type. But of
|
By
Mattes
·
#12698
·
|
|
Re: suggestion for Janome: metal hopping foot--Q for Jim
Thanks Jim. Easier to just buy one! I’ll call Fabric Garden and see if Kala has one in stock—I’ll go look at it and see if I can fiddle with mine or easier to just buy one!
Cheers,
|
Thanks Jim. Easier to just buy one! I’ll call Fabric Garden and see if Kala has one in stock—I’ll go look at it and see if I can fiddle with mine or easier to just buy one!
Cheers,
|
By
Sarah A. Smith <sarahannsmith@...>
·
#12697
·
|
|
oops! trouble with dual feed
Oh so sorry, I misspoke about how to engage the Acuflex feet on the machine! I gave instructions for my old 6600 and that was not the same as for our 12000 and 15000 machines. On the Janome 6600
|
Oh so sorry, I misspoke about how to engage the Acuflex feet on the machine! I gave instructions for my old 6600 and that was not the same as for our 12000 and 15000 machines. On the Janome 6600
|
By
favymtz
·
#12696
·
|
|
Re: Save your hoops with this method...
I think it makes sense. I didn’t know the screws would strip outeither. If you skip to about 4:59 is when she actually shows what she’sdoing.
Cas
|
I think it makes sense. I didn’t know the screws would strip outeither. If you skip to about 4:59 is when she actually shows what she’sdoing.
Cas
|
By
cas@...
·
#12695
·
|
|
Re: Dual foot wouldn't feed ...!?
Did you check to be sure the finger/lever in the back was fully engaged when you put on the foot? I've had it pop/slip out when I was sewing something bulky so had to keep an eye on it. It wasn't
|
Did you check to be sure the finger/lever in the back was fully engaged when you put on the foot? I've had it pop/slip out when I was sewing something bulky so had to keep an eye on it. It wasn't
|
By
blue_lak <no_reply@...>
·
#12694
·
|
|
Re: Dual foot wouldn't feed ...!?
Are you sure that the dual feed in engaged. Sometimes the little gizmo at the back needs to be popped into its resting spot. If it is not the fabric will not feed or at least not well.
Cheryl -
|
Are you sure that the dual feed in engaged. Sometimes the little gizmo at the back needs to be popped into its resting spot. If it is not the fabric will not feed or at least not well.
Cheryl -
|
By
Cheryl Paul
·
#12693
·
|
|
Re: Skipped stitches during FMQ
My, would love to have you come and take care of my garden, Claire S.
On 1/27/2015 4:36 PM, paradisebreezequilts@... [janome12000] wrote:
|
My, would love to have you come and take care of my garden, Claire S.
On 1/27/2015 4:36 PM, paradisebreezequilts@... [janome12000] wrote:
|
By
Claire Schutz
·
#12701
·
|
|
Re: Dual foot wouldn't feed ...!?
If it won't feed it's probably because you didn't "engage" the mechanism to make it work.
After you screw the foot onto the needle bar be sure to pull the mechanism down and forward to lock it onto
|
If it won't feed it's probably because you didn't "engage" the mechanism to make it work.
After you screw the foot onto the needle bar be sure to pull the mechanism down and forward to lock it onto
|
By
favymtz
·
#12692
·
|
|
Re: Save your hoops with this method...
Machine owners have been using shelf liner , the non slip variety used in travel homes, cutaway frames pet tape for a long time. I got my first machine in 1996, a little Brother 200 Snoopy machine,
|
Machine owners have been using shelf liner , the non slip variety used in travel homes, cutaway frames pet tape for a long time. I got my first machine in 1996, a little Brother 200 Snoopy machine,
|
By
maggie cooper
·
#12691
·
|
|
Re: Save your hoops with this method...
I learned in my Embroidery Club to always use strips of shelf liner along the sides of the hoop when hooping only stabilizer. This keeps the thin layer tight.
|
I learned in my Embroidery Club to always use strips of shelf liner along the sides of the hoop when hooping only stabilizer. This keeps the thin layer tight.
|
By
Lucy Akers
·
#12690
·
|
|
Clothsetter advice for the MC 12000
This may have been covered a while ago but if so I have missed it. I have recently brought the clothsetter for the MC 12000 and want to know is there a way to calibrate more than one hoop to the
|
This may have been covered a while ago but if so I have missed it. I have recently brought the clothsetter for the MC 12000 and want to know is there a way to calibrate more than one hoop to the
|
By
shirlee.chatterton
·
#12689
·
|
|
Save your hoops with this method...
I came across this video and wonder what others think. It seems a good idea but I didn't know that the hoops would eventually need to be
|
I came across this video and wonder what others think. It seems a good idea but I didn't know that the hoops would eventually need to be
|
By
ceilsews <no_reply@...>
·
#12688
·
|
|
Re: How to print template fr iPad apps?
Sorry to bother you but have family member who insists that since my printer is not wi-fi I will not be able to do this from the Ipad, thanks, Claire S.
Also not WiFi-enabled, Jim
|
Sorry to bother you but have family member who insists that since my printer is not wi-fi I will not be able to do this from the Ipad, thanks, Claire S.
Also not WiFi-enabled, Jim
|
By
Claire Schutz
·
#12687
·
|
|
Re: Skipped stitches during FMQ
This is weird - now I can't see my reply ??
Thanks very much Jim - I'll swap the needle and the plate then. Thank very much for your help.
Hopefully that's the cure!
Cheers!
Michelle
Always weird,
|
This is weird - now I can't see my reply ??
Thanks very much Jim - I'll swap the needle and the plate then. Thank very much for your help.
Hopefully that's the cure!
Cheers!
Michelle
Always weird,
|
By
Paradise BreezeQuilts
·
#12686
·
|
|
Re: Skipped stitches during FMQ
Thanks very much Jim - I'll swap the needle and the plate then (and cross my fingers!) Not that I doubt you or anything! I appreciate your time and help :)
Cheers
Michelle
|
Thanks very much Jim - I'll swap the needle and the plate then (and cross my fingers!) Not that I doubt you or anything! I appreciate your time and help :)
Cheers
Michelle
|
By
Paradise BreezeQuilts
·
#12685
·
|
