|
|
Flashdrive with Error Messages
Thanks Jim, I was hoping I could save the data. When I had XP I would click to eject the drive and it would tell me when it was safe and the lights would go off on the drive. Only then would I
|
Thanks Jim, I was hoping I could save the data. When I had XP I would click to eject the drive and it would tell me when it was safe and the lights would go off on the drive. Only then would I
|
By
cas@...
·
#12012
·
|
|
Re: Looking for sewing machine table
> Want something to put it on but also have drawer space and maybe an extension for a serger or small machine.
Carolyn
I have a wheeled pedestal that fits under my table with my embroiderythreads in.
|
> Want something to put it on but also have drawer space and maybe an extension for a serger or small machine.
Carolyn
I have a wheeled pedestal that fits under my table with my embroiderythreads in.
|
By
Anne Parker <annegparker@...>
·
#12011
·
|
|
Re: Saving a design
Horizon Link does not allow you to save designs in a different format than Janome. It is a program that is limited. Now if you have Janome MBX software which is Janome software you can save the
|
Horizon Link does not allow you to save designs in a different format than Janome. It is a program that is limited. Now if you have Janome MBX software which is Janome software you can save the
|
By
Virginia
·
#12010
·
|
|
Re: New laptop & HorizonLink update?
Jim, my computer says the syntax is incorrect, or something similar, when I insert my flash drive. I’m guessing it’s shot too? I’m sad. It had files from the last 10 years on it that I took
|
Jim, my computer says the syntax is incorrect, or something similar, when I insert my flash drive. I’m guessing it’s shot too? I’m sad. It had files from the last 10 years on it that I took
|
By
cas@...
·
#12009
·
|
|
Re: Saving a design
Jim, oops, I know that HLS only will save JEF and JEF+, so if she saves it as the JEF then opens it in her Wilcom to save it as PES that will work. But still, she doesn't have to send it from her
|
Jim, oops, I know that HLS only will save JEF and JEF+, so if she saves it as the JEF then opens it in her Wilcom to save it as PES that will work. But still, she doesn't have to send it from her
|
By
favymtz
·
#12007
·
|
|
Re: Saving a design
Jim, Since you have the Horizon Link Suite, couldn't you simply open the design there and then save as the PES? When we install the HL, all of the built in designs are stored in the program on the
|
Jim, Since you have the Horizon Link Suite, couldn't you simply open the design there and then save as the PES? When we install the HL, all of the built in designs are stored in the program on the
|
By
favymtz
·
#12008
·
|
|
Re: Horizon Link and MBX
Maggie,
Well written. Your view is very enlightening to those who fear digitizing.
Carolyn
|
Maggie,
Well written. Your view is very enlightening to those who fear digitizing.
Carolyn
|
By
cmgazerro@...
·
#12006
·
|
|
Re: Looking for sewing machine table
Hi,
I bought one of those computer desks in a box that you put together yourself. It has a return and 4 drawers. It is very stable. Great for when I am machine embroidering. I have my serger on the
|
Hi,
I bought one of those computer desks in a box that you put together yourself. It has a return and 4 drawers. It is very stable. Great for when I am machine embroidering. I have my serger on the
|
By
Estelle Torpy
·
#12004
·
|
|
Re: Saving a design
Can you open the JEF+ file in HL Suite and resave as a plain JEF? Trusizer should recognize that and convert, but there's no guarantee that the stitchout will be the same between the two machines.
Jan
|
Can you open the JEF+ file in HL Suite and resave as a plain JEF? Trusizer should recognize that and convert, but there's no guarantee that the stitchout will be the same between the two machines.
Jan
|
By
blue_lak <no_reply@...>
·
#12005
·
|
|
Re: Saving a design
Jim she is trying to convert the design to a PES from a JEF.
Joyce not being familiar with the TruSizer try to open it in the Trusizer and go to the top tool bar File and Save As to convert, it could
|
Jim she is trying to convert the design to a PES from a JEF.
Joyce not being familiar with the TruSizer try to open it in the Trusizer and go to the top tool bar File and Save As to convert, it could
|
By
Virginia
·
#12001
·
|
|
Re: New laptop & HorizonLink update?
Jim,
After doing some testing of the flash drive, we (my hubby & I) determined the flash drive was fine as we were both able to copy/open files from the drive on 2 different laptops (his is
|
Jim,
After doing some testing of the flash drive, we (my hubby & I) determined the flash drive was fine as we were both able to copy/open files from the drive on 2 different laptops (his is
|
By
brittisl1018@...
·
#12002
·
|
|
Re: Horizon Link and MBX
Anne, the love of my life has been far more complimentary than I deserve, thank you 007.
Ok, examples of good digitising, unfortunately with the popularity of domestic embroidery machines and
|
Anne, the love of my life has been far more complimentary than I deserve, thank you 007.
Ok, examples of good digitising, unfortunately with the popularity of domestic embroidery machines and
|
By
maggie cooper
·
#12000
·
|
|
Re: Horizon Link and MBX
Thanks Jim
I realised I could change the thread make layer by layer - but everytime I go into the color tool it defaults to Janome and I keep having to change it to Mettler.
What I would like to be
|
Thanks Jim
I realised I could change the thread make layer by layer - but everytime I go into the color tool it defaults to Janome and I keep having to change it to Mettler.
What I would like to be
|
By
annegparker@...
·
#12003
·
|
|
Re: Saving a design
Hi Jim,
Thanks for your answer. I'm not a closet brother user (lol) but I must confess to a baby lock, hence the need for pes. I've been doing a ton of FSL and would really like to use both
|
Hi Jim,
Thanks for your answer. I'm not a closet brother user (lol) but I must confess to a baby lock, hence the need for pes. I've been doing a ton of FSL and would really like to use both
|
By
J M
·
#11999
·
|
|
Re: Replacing hoops for 12000
Thanks to all of you for the information. It will come in handy to know where to order Janome parts. Since the hoops are expensive, I'm going to wait a little while in the hope that they'll turn up
|
Thanks to all of you for the information. It will come in handy to know where to order Janome parts. Since the hoops are expensive, I'm going to wait a little while in the hope that they'll turn up
|
By
Sue Raabe <susies.stitches@...>
·
#11997
·
|
|
Re: New laptop & HorizonLink update?
If you are updating you will not put the update into the folders, infact remove those folders from your flash drive. You need a clean drive to update. You only use the folders when you are
|
If you are updating you will not put the update into the folders, infact remove those folders from your flash drive. You need a clean drive to update. You only use the folders when you are
|
By
Virginia
·
#11996
·
|
|
Re: New laptop & HorizonLink update?
I think that has been the issue with most of us. I am not sure why but switching to a different port on your computer will probably correct the issue. I found that someone I helped install switched
|
I think that has been the issue with most of us. I am not sure why but switching to a different port on your computer will probably correct the issue. I found that someone I helped install switched
|
By
Virginia
·
#11994
·
|
|
Re: New laptop & HorizonLink update?
Hope you had the data elsewhere. RIP flash drive!
Vikki
Houston, TX
|
Hope you had the data elsewhere. RIP flash drive!
Vikki
Houston, TX
|
By
Vikki Youngmeyer
·
#11998
·
|
|
Saving a design
Hi
I have the janome 15000 and I'm trying to save one of the built in designs to a usb so I can stitch this design on another machine. (To save time) I finally got it on the usb but it saved as
|
Hi
I have the janome 15000 and I'm trying to save one of the built in designs to a usb so I can stitch this design on another machine. (To save time) I finally got it on the usb but it saved as
|
By
J M
·
#11995
·
|
|
Re: New laptop & HorizonLink update?
I have tried to get the update software onto the flash drive from 2 different laptops (win7 or win 8.1). On both laptops the flash drive is being read but the UPDATE TOOL does not recognize that the
|
I have tried to get the update software onto the flash drive from 2 different laptops (win7 or win 8.1). On both laptops the flash drive is being read but the UPDATE TOOL does not recognize that the
|
By
brittisl1018@...
·
#11992
·
|
