Date   

Re: iPad and pencil

ladybug35186
 

I have a mini iPad and also a Surface Pro tablet that I have been using for years - still love it.  It's relatively expensive but has not disappointed. Good Luck!


-----Original Message-----
From: Mary S. Hahn via groups.io <maryshahn@...>
To: onlinesewing-janome@groups.io
Sent: Sat, Mar 27, 2021 10:46 am
Subject: Re: [onlinesewing-janome] iPad and pencil

On a slightly different topic but still Apple, I have a dinosaur laptop which I have relied on for years which appears to be failing. Do you have a recommendation. I use it for all my Janome storage and transfer of embroidery designs to my machine. I use a much newer phone and iPad for everything else. Looking for a newish laptop for Janome interface. Recommendations please.
Mary Hahn


On Mar 27, 2021, at 7:59 AM, Jim Stutsman via groups.io <onlinesewing@...> wrote:

This is probably the model you want: https://www.apple.com/ipad-10.2/
However, if you can wait a bit, we're expecting an Apple event soon that may announce new models. The above model is already discounted some at Amazon: https://www.amazon.com/s?k=iPad+10.2&ref=nb_sb_noss_2
If  a new model is announced they may drop the price on this one, or other retailers like Best Buy, Costco, etc. may be discounting it.


Re: iPad and pencil

Jim Stutsman
 

I agree with Mattes. I recently got the M1 MacBook Air and it's fantastic. No fan, no heat, lots of speed and long battery life. BUT you cannot run Windows on it, even in a Virtual Machine. If that's a deal breaker you can find lots of discounted MacBook Pros with Intel chips. Just make sure you get a 2020 model, which is when they finally replaced the awful "butterfly" keyboard.


Re: iPad and pencil

Mattes
 

Do you have a recommendation. I use it for all my Janome storage and transfer of embroidery designs to my machine.
If you're fine with NOT running Windows on your Mac, I'd look at the new M1 MacBook Air or Pro. I've got the latter and its battery life and speed it gorgeous ... without turning the slightest warm. Compatibility with older apps - not optimized for Apple Silicon - is flawless.

Mattes


Re: 12000 side "table"

Virginia
 

The acrylic table should have come with your machine if you bought from a dealer.  If you bought from some else they may have not included it     with your purchase.  It is standard when you purchase new.



-----Original Message-----
From: Joyce Daniel <mdaniel@...>
To: onlinesewing-janome@groups.io
Sent: Sat, Mar 27, 2021 1:47 pm
Subject: [onlinesewing-janome] 12000 side "table"

At the recent ATL Sew Expo, I saw a clear lucite side “table” that hooked on to the machine. Wondering if anyone has this side table on their 12000 that could give an opinion on it? Also, where one can be purchased or if another has one they would like to sell/get rid of?
Thanks!!! Joyce…..in brrrrr Alaska visiting her daughter
 
 
We are all tourists, God is our travel agent
who has already identified our routes,
bookings, and destinations…..trust Him always
and enjoy the beautiful life He has given you.
Charlie Chaplin
 


Re: Mbx 5.5 will not open

 

Thank you Jim for the advice an the link for making an image backup of the C Drive! Really great!


Enviado desde Yahoo Mail para iPad

El viernes, marzo 26, 2021, 8:46 a.m., Kaye Lessard <ekay50@...> escribió:

I  need advice
I have mbx5.5 on laptop windows 10
I was trying to send designs from a removable hard drive to a usb stick- looking at designs in manage designs - opening them -then write to usb 
It wouldn’t write or let me export 
Then it wouldn’t let me see designs!!!
They are older designs
So after using horizon link I decided to download sew iconzer
It put red X on my designs
So I uninstalled it!!
Now I am getting designs open with Corel
Will not let me change Jef files to digizter mbx
 
So I tried to repair the program -went to janome site downloaded the latest hasp driver
Then using the usb stick that came with v5.5 upgrade
I tried repairing the program
But then I got a crc error!!!
Now the digizter mbx will not open at all!!!
I have sent an email to janome- waiting for answer
Thought about I installing then reinstalling
But do I use the v5.0 cd then usb stick ?
If I’m suppose to use the usb stick what do I do if it is corrupted? 
Any guidance is appreciated !!
kaye in la


12000 side "table"

Joyce Daniel
 

At the recent ATL Sew Expo, I saw a clear lucite side “table” that hooked on to the machine. Wondering if anyone has this side table on their 12000 that could give an opinion on it? Also, where one can be purchased or if another has one they would like to sell/get rid of?

Thanks!!! Joyce…..in brrrrr Alaska visiting her daughter

 

 

We are all tourists, God is our travel agent

who has already identified our routes,

bookings, and destinations…..trust Him always

and enjoy the beautiful life He has given you.

Charlie Chaplin

 


Re: iPad and pencil

Kathy Skagen <kagen48@...>
 

Sandy,
I have the iPad that Jim recommended just now. It is indeed the best price. I bought my Apple Pencil on Amazon. Mine is 1st generation for the iPad 10.2 8th gen and works well. It is normally about $99 but I found it on sale during the holidays for about $15 off of that price. You would want to get your iPad first since the Pencil (1st gen or 2nd gen) is specific to the type of iPad you get. 
Kathy

On Saturday, March 27, 2021, 08:54:41 AM CDT, sandy k via groups.io <sandys7777@...> wrote:


Hi.
What is the most affordable iPad and Apple Pencil?  Don’t need anything fancy, but don’t want to waste my money either.  My iPad won’t support a pencil and doesn’t have enough storage.
Thanks
Sandy
East Texas

sandykquilts
From my iPhone






Re: iPad and pencil

Mary S. Hahn
 

On a slightly different topic but still Apple, I have a dinosaur laptop which I have relied on for years which appears to be failing. Do you have a recommendation. I use it for all my Janome storage and transfer of embroidery designs to my machine. I use a much newer phone and iPad for everything else. Looking for a newish laptop for Janome interface. Recommendations please.
Mary Hahn


On Mar 27, 2021, at 7:59 AM, Jim Stutsman via groups.io <onlinesewing@...> wrote:

This is probably the model you want: https://www.apple.com/ipad-10.2/
However, if you can wait a bit, we're expecting an Apple event soon that may announce new models. The above model is already discounted some at Amazon: https://www.amazon.com/s?k=iPad+10.2&ref=nb_sb_noss_2
If  a new model is announced they may drop the price on this one, or other retailers like Best Buy, Costco, etc. may be discounting it.


Re: Threading Machine Tips

Cat - N
 

Is this the thread stand:

https://www.amazon.com/Superior-Threads-THRDHLDERNEW-Holder-Thread/dp/B007JN3ASU/ref=sr_1_6?crid=2PN73YQTBKGLP&dchild=1&keywords=thread+director&qid=1616856698&sprefix=thread+dire%2Caps%2C206&sr=8-6

- Cat

Typos courtesy of autocorrect. 



On Mar 27, 2021 at 9:52 AM, <Pixey via groups.io> wrote:

Last year, I had two different shops say they could not get them anymore.  However, I just checked the Superior Threads site and they show it as Out of Stock but more expected in on 5/21.   

Pixey


On Mar 26, 2021, at 9:46 AM, favymtz <favymtz@...> wrote:

re: Superior Thread Stand: oh, that would be sad if they don't make it anymore, it's a really good thread holder.
It's the one I get the best results with for monofilament thread and metallics...
--
Favymtz
_.


Re: iPad and pencil

sandy k
 

Thank you. More affordable than I thought!

sandykquilts 
From my iPhone 

On Mar 27, 2021, at 8:59 AM, Jim Stutsman via groups.io <onlinesewing@...> wrote:

This is probably the model you want: https://www.apple.com/ipad-10.2/
However, if you can wait a bit, we're expecting an Apple event soon that may announce new models. The above model is already discounted some at Amazon: https://www.amazon.com/s?k=iPad+10.2&ref=nb_sb_noss_2
If  a new model is announced they may drop the price on this one, or other retailers like Best Buy, Costco, etc. may be discounting it.


Re: iPad and pencil

Jim Stutsman
 

This is probably the model you want: https://www.apple.com/ipad-10.2/
However, if you can wait a bit, we're expecting an Apple event soon that may announce new models. The above model is already discounted some at Amazon: https://www.amazon.com/s?k=iPad+10.2&ref=nb_sb_noss_2
If  a new model is announced they may drop the price on this one, or other retailers like Best Buy, Costco, etc. may be discounting it.


Re: Mbx 5.5 will not open

favymtz
 

Oh wow Kaye, you’re in a pickle, and one that happened to me as well.
Sewiconz is the villain! I had installed it to see if it was a good option for my students who didn’t have any software to view embroidery designs. What a mess.
When it happened to me it took many, many tries for the Janome team and Wilcom working with me to get the program to work properly again. As Jim said the MBX was the appointed default to display images and Sewiconz overruled that and when you uninstall it permanent changes happened in MBX. 
Don't worry, keep at the support people, and they’ll find the solution for your computer. You’ll be changing command lines and they need to determine exactly which. 

I wish you good success!
--
Favymtz


iPad and pencil

sandy k
 

Hi.
What is the most affordable iPad and Apple Pencil? Don’t need anything fancy, but don’t want to waste my money either. My iPad won’t support a pencil and doesn’t have enough storage.
Thanks
Sandy
East Texas

sandykquilts
From my iPhone


Re: Threading Machine Tips

Pixey
 

Last year, I had two different shops say they could not get them anymore.  However, I just checked the Superior Threads site and they show it as Out of Stock but more expected in on 5/21.   

Pixey


On Mar 26, 2021, at 9:46 AM, favymtz <favymtz@...> wrote:

re: Superior Thread Stand: oh, that would be sad if they don't make it anymore, it's a really good thread holder.
It's the one I get the best results with for monofilament thread and metallics...
--
Favymtz


Re: Diane’s magnetic hoop

Cat - N
 

Just as FYI, the "Mending Plates" I received from the Amazon link Jim provided were a Stanley product, Item 75-5851.  I would kind of expect to see these in just about any hardware store, if needed very quickly. 

- Cat


Re: Mbx 5.5 will not open

Janet Bland
 

Sandy posted this link for the HASP driver and it worked great on my computer.  I used her instructions for installing Digitizer Pro and was able to get my old software up and running.

 

Be sure to read the update installation instructions.  You will also need to download a Windows 10 dongle driver for digitizer embroidery software.  I downloaded mine from:   

https://supportportal.thalesgroup.com/csm?sys_kb_id=61fb0ee1dbd2e78cfe0aff3dbf9619ab&id=kb_article_view&sysparm_rank=8&sysparm_tsqueryId=5b1f73701b122c10f2888739cd4bcbd7&sysparm_article=KB0018320.

 

 


Re: Mbx 5.5 will not open

Jim Stutsman
 

Times like this are when you really want to have an image backup of your C drive, but I suspect you don't have that. It sounds like you may have multiple problems happening at once. Windows allows only one program to be responsible for opening a given file type. When you installed Iconizer it became the default. When you uninstalled it the default was not changed back to MBX - Windows doesn't do that. We have not upgraded from 5.0 to 5.5, so I don't know what's involved with the USB stick that came with 5.5. I would not recommend installing or reinstalling from the 5.0 DVD. Your best option now is to wait for Janome because this is very complex software and is super easy to mess up. The CRC error is worrying, because that essentially is saying that data being read from a hard drive is not correct. It could be a hard drive failure, especially if it's very old, or it could be a memory failure. It could also be data corruption. While you are waiting, it might be good to run diagnostics on the computer: https://quickdata.org/blog/how-to-run-diagnostics-on-windows-10/

For those reading this, the best kind of backup is one that makes a byte for bye image to an external hard drive. This is what I used before my Windows sobriety: https://www.acronis.com/en-us/products/true-image/
With an image backup you can restore your computer back to the state it was in when last backed up. If you do nightly backups you will normally never lose any work.


Re: Diane’s magnetic hoop

SparkleFever
 


Re: Threading Machine Tips

favymtz
 

re: Superior Thread Stand: oh, that would be sad if they don't make it anymore, it's a really good thread holder.
It's the one I get the best results with for monofilament thread and metallics...
--
Favymtz


Mbx 5.5 will not open

Kaye Lessard
 

I  need advice
I have mbx5.5 on laptop windows 10
I was trying to send designs from a removable hard drive to a usb stick- looking at designs in manage designs - opening them -then write to usb 
It wouldn’t write or let me export 
Then it wouldn’t let me see designs!!!
They are older designs
So after using horizon link I decided to download sew iconzer
It put red X on my designs
So I uninstalled it!!
Now I am getting designs open with Corel
Will not let me change Jef files to digizter mbx
 
So I tried to repair the program -went to janome site downloaded the latest hasp driver
Then using the usb stick that came with v5.5 upgrade
I tried repairing the program
But then I got a crc error!!!
Now the digizter mbx will not open at all!!!
I have sent an email to janome- waiting for answer
Thought about I installing then reinstalling
But do I use the v5.0 cd then usb stick ?
If I’m suppose to use the usb stick what do I do if it is corrupted? 
Any guidance is appreciated !!
kaye in la

2621 - 2640 of 30859