Date   

Re: Janome/Organ needles

vicki J. Wardwell <vjw_65@...>
 

Couldn't complete the order Pay Pal was down I guess of well next month
--
Vicki Jane Hull- Wardwell


Re: Cover Pro 1000 CXP

Cynthia Dickerson
 

Thank you Tracy, I will be remembering this hint!!!


Re: Memory Craft 11000 auto needle threader not working

Jim Stutsman
 

I don't think you're doing anything wrong. It sounds like a sensor is detecting that the needle is NOT in the up position, so it's refusing to bring the threader down. Try turning the hand wheel a little bit, then pressing the needle up/down button until the needle is up. If that doesn't work it will need to be seen by a service technician.


Memory Craft 11000 auto needle threader not working

lakeradio6 <lakeradio6@...>
 

The needle up/down and auto threader buttons are both lighted light green
When press both beep, and nothing else happens. The display does not change
and no motor runs, only the beep.
What am I doing wrong ?
Thanks


Re: Digitizer Ver 5.0 Activation Transfer Program

Sherry Guequierre <guequies@...>
 

Thank you Jim!!

Sherry


1/4" foot

Kathleen Chevalier
 

I have a Skyline S9 and find that the 1/4" foot that came with it is not 1/4" from the center (default) needle position and the guide on the foot, page 90 of the manual. It is a generous 3/8". To get a 1/4" seam using the guide the needle position must be moved to the right at 7.5. Now this puts the fabric on all the feed dogs, but I find it really strange. Anyone else noticed this for your machine?

--
Kathleen Chevalier
western Pennsylvania


Re: Janome/Organ needles

vicki J. Wardwell <vjw_65@...>
 

Are these the ones? 15x1/HAx1 Organ Needles Sharp Point 100pcs
SKU # : ORGAN-15x1
Thank you for the link


--
Vicki Jane Hull- Wardwell


Re: Janome/Organ needles

vicki J. Wardwell <vjw_65@...>
 

Thanks Jim I'll replace it ASAP. i have HAX also!
There are so many things to learn, being brain damaged does not help 12 strokes starting in1984 i was 37.
brain damage and old are a double whammy.
Trying to entertain myself.
My knee lift issue is because the table it is on doesn't allow the complete  insert or lift.
--
Vicki Jane Hull- Wardwell


Re: Cover Pro 1000 CXP

 

Thank you for your feedback. I was having the same problem with my coverpro, change brand of thread and this lovely machine is working fine. It is a great machine.


Enviado desde Yahoo Mail para iPad

El jueves, mayo 21, 2020, 7:44 a.m., Cynthia Dickerson <cindydickerson@...> escribió:

Thank you for your help.  I got up this morning at 2:30am because It was on my mind and started working again on it.  A friend had sent me the cover pro repair manual and I went to work.  By 6:30am, it was running great and my shirt was finished.  I cleaned the discs first and changed thread to three different colors.  I had to use another brand and found out that for one thing, it did not like the thread I was using even though I had used it before.  When I put in Maxi Lock, I could tell the discs were better.  I changed all of my settings including the pressure on the presser foot which are is where even near what the factory settings should be.  I see know why it never ran that great.  I was always afraid to mess with the dials for fear of really messing it up.  Well, it is running great now and I am happy.  


Re: Digitizer Ver 5.0 Activation Transfer Program

Jim Stutsman
 

I haven't used Virtual Box in ages, but what you need is in Settings. With the VM powered off, click Settings, then Network. You probably only have 1 network adapter. Click the Attached to box and choose Bridged adapter. That should allow your VM to see the 15000.


Re: Digitizer Ver 5.0 Activation Transfer Program

Sherry Guequierre <guequies@...>
 

Jim,

I did not see Bridge mode when installing VirtualBox but I am able to drag and drop files from Mac to vm and vm to Mac so I can access cd drive and usb sticks.

Sherry


Re: Cover Pro 1000 CXP

Tracy
 

Jim may have more info about this - but I think if you turn the handwheel backwards about 1/4 turn and have the presser foot up that the tensions are supposed to be released.  This works on my 644D Janome serger and is something that was one of the lessons in a generic serger class I have been part of.

Tracy in Nashville, TN

Martha Pullen Licensed Educator


Re: Artistic digitizer free trial???

Mary Jo Hirsch
 

Has it been used and how difficult to use ?  Have Microsoft 10 will this work with software?  Thanks

On Thu, May 21, 2020 at 3:19 PM Sewhat via groups.io <ddstrode=verizon.net@groups.io> wrote:
Why are you selling it?  Is it the current version?

--
null


Re: Artistic digitizer free trial???

Sewhat
 

Why are you selling it?  Is it the current version?


Re: Janome/Organ needles

Sally on the WE(s)T Side
 

Yes, you got an industrial or a needle for an older household serger or longarm machine.  When you order, check to make sure you are ordering for domestic or household sewing machines.  CTSUSA carries both and the price is fantastic:



Sally

--


Re: Janome/Organ needles

Jim Stutsman
 

Organ makes a plethora of needles for all sorts of machines. Many commercial machines use round needles with no flat side. Those won't work in your machine. Look for needles with the designation HA x 1, 15 x 1, or 130/705H.


Re: Digitizer Ver 5.0 Activation Transfer Program

Jim Stutsman
 

Make sure that your virtual machine has access to the network. VMware Fusion defaults to using the Mac as the network, which provides access to the Internet, but NOT to local devices. Set up your VM using bridge mode for the network. That will allow the VM to see devices on the network the Mac is connected to.


Re: Janome/Organ needles

vicki J. Wardwell <vjw_65@...>
 

I tried the organ needle size 14  t does not have a flat back like i am used to using. did i get the wrong kind of organ?
--
Vicki Jane Hull- Wardwell


Re: Digitizer Ver 5.0 Activation Transfer Program

Sherry Guequierre <guequies@...>
 

Jim,

Thanks to your guidance, instructions and suggestions I now have VirtualBox, Windows 10 and Digitizer V5.5 up and running on my MacBook Pro which has a 27” ultra sharp monitor connected to it.  The only problem I have is that Digitizer no longer can find my MC15000 to send designs wirelessly.  This is a minor issue I’m not going to fret over.  Thank you so much for sharing your experience and knowledge with us.  I never would have been able to go from pc to Mac and have everything up and running without your assistance.  I am very grateful.

Sherry


Re: Artistic digitizer free trial???

donna altieri
 

I  am selling the complete artistic suite which includes the digitizer.  I am asking $300 OBO plus shipping.

just thought I would let you know.

donna

2901 - 2920 of 29648