Date   
Re: 28 wt aurafill thread

JUDY
 

thank you!



On Tuesday, March 26, 2019, 3:54:31 PM EDT, Pam Davison <pamyjo2001@...> wrote:


Have not used that brand but have used Sulky 12 wt and 30 wt in both top and bobbin for decorative stitching


From: onlinesewing-janome@groups.io <onlinesewing-janome@groups.io> on behalf of JUDY <ponikvar60@...>
Sent: Tuesday, March 26, 2019 9:26:17 AM
To: onlinesewing-janome@groups.io
Subject: [onlinesewing-janome] 28 wt aurafill thread
 

Has anyone ever used 28wt thread on their 15000?  What for and do you put it on bobbin or top?




Re: AcuStitch Software

Lynne Dean
 

Hi Viola

Janome UK quoted me £29 GBP which I thought was very reasonable when you consider the price of some other machine add ons and accessories.

Lynne

Re: 28 wt aurafill thread

Pam Davison
 

Have not used that brand but have used Sulky 12 wt and 30 wt in both top and bobbin for decorative stitching


From: onlinesewing-janome@groups.io <onlinesewing-janome@groups.io> on behalf of JUDY <ponikvar60@...>
Sent: Tuesday, March 26, 2019 9:26:17 AM
To: onlinesewing-janome@groups.io
Subject: [onlinesewing-janome] 28 wt aurafill thread
 

Has anyone ever used 28wt thread on their 15000?  What for and do you put it on bobbin or top?



Re: AcuStitch Software

Viola Tani
 

Lynne,

Looks interesting, how much is it?  Viola

28 wt aurafill thread

JUDY
 

Has anyone ever used 28wt thread on their 15000? What for and do you put it on bobbin or top?

Re: AcuStitch Software

Jim Stutsman
 

Yes both the 12000 and 15000 apps will have the video magically appear when it’s ready. 

Re: AcuStitch Software

bhd02@...
 

Jim, will those who already have the app get the additional video? Can't remember how that works.

Re: AcuStitch Software

JILL BAILEY
 

another Windows only prog ... grrrr apps are Apple HL windows when will they combine 

Re: 6600 P problem

Jim Stutsman
 

The spring inside the foot holder (the part that is held on the machine by a screw) that grips the bar on the foot is bent or broken. I’ve found that the fastest, best solution is to buy a new foot holder. They’re not expensive. I think this happens if the presser foot is lowered over a foot that is not quite lined up with the foot holder.

6600 P problem

Shirley Taylor
 

The feet fall off the ankle Is there a simple solution. It is like they don’t snap onto the ankle. I thought it was anew foot but the ones that came with the machine do the same. If I don’t touch it or raise the pressure foot up it will stay in place but if I lift it up to remove the item I am sewing it falls off. It’s just started. I thought the upper feed mechanism was hitting the red red release. But it is in place and doesn’t hit anything.
Any thoughts?

Re: AcuStitch Software

Jim Stutsman
 

Yes, it's a Windows program that produces JEF design files. The machines it supports are shown in the top left corner of this PDF:
https://www.janome.co.jp/e/e_downloads/pdf/janomebulletin/JTM-1059_AcuStitch_R2.pdf

Re: AcuStitch Software

LindaB 1
 


--
Does this software work for the 120000?

Re: AcuStitch Software

Jim Stutsman
 

Yes, it will also go in that app. It will be a few weeks while we get it done. 

Re: AcuStitch Software

Lynne Dean
 

Thank you Jim.  Might Diane’s video be included in the 12000 app too?  It is a fantastic resource and I’m pretty good with instruction manuals but after getting your app I’ve got so much more out of my machine.  I still find things I’d forgotten the machine can do each time I browse through it.  The quilt binder video in FootBook was a life saver too!  

Thanks
Lynne

Re: AcuStitch Software

Lynne Dean
 

Thanks Linda, look forward to hearing how you get on with it.

lynne

Re: Chirping sound on the 6500MC when Free Motion Quilting

Jim Stutsman
 

If you are using a hopping foot, like the P foot, it could be the source of the noise. As the foot hops up and down, it may squeak a bit. Put a drop (JUST ONE!) on the shaft inside the spring. Make sure it gets to both points that it passes through. That should solve the problem.

Re: digitizing question

Kaye Lessard
 

Check background color !!

Re: digitizing question

VLS
 

Thanks Cheryl I will try that if it ever happens again.  I actually took the snipping tool and snagged it
then resaved it and it opened ok.
 
Vicki
 

From: Cheryl Alm
Sent: Sunday, March 24, 2019 3:15 PM
Subject: Re: [onlinesewing-janome] digitizing question
 
Try going to the Corel part of the software and importing it to the program then switching back to embroidery mode.   That has worked for me.


On Mar 23, 2019, at 7:19 AM, VLS <hshocraf@...> wrote:

I have not digitized for a long time,  I have MBX 4.5 when I bring my jpeg into the software it turns the background green,
I even took it into corel and re-saved it.  But that didn't help.  Can someone tell me what Im doing wrong.  I've attached a photo
of the sheep jpeg then of the one that the software turns green when I try to insert the image into the software
Vicki
<sheep.JPG>

Chirping sound on the 6500MC when Free Motion Quilting

srd.sonborne@...
 

I'm the new owner of this machine and have just started using it for machine quilting. When Free Motion Quilting, I"m getting a slight chirping sound and am wondering if it's normal.

I've taken off the needle plate and cleaned everything - the bobbin case holder, etc... and put it all back together.

Has anyone else experienced this noise?

Re: AcuStitch Software

Jim Stutsman
 

We just got it. Diane is currently working with it in preparation to making a video for the 15000 app. It FINALLY gives us the ability to make stitches into embroidery.