Since we're discussing cables....could a USB "hub" be used to keep two embroidery machines constantly connected to the same computer?

Got it.

Thank you for the advice.  The design is a single run, open design.  I’ll try the 40wt thread and top stitch needle.

I tried that. the old cable won't go into the new one. Maybe it's just a faulty cable.
--
Thank you,
Meryl

If all you want to do is plug a cable into your machine that you can then plug various thumb drives into without always plugging them into your machine, you need something like this: https://www.amazon.com/UGREEN-Transfer-Enclosures-Printers-Cameras/dp/B00P0E3954/ref=sr_1_4?s=electronics&ie=UTF8&qid=1547468436&sr=1-4&keywords=usb+to+usb
They are too long but you can coil them up 

But will it run Digitizer? http://www.ireneposch.net/the-embroidered-computer/

I updated a digitizer jr to mbx 4.5 and had to call Terri at Janome us
I now have a call out for another lady who tried to install from 4.0 mbx to 4.5 update
Hoping she calls her tomorrow!!
I believe (access code) it has to do with the cross stitch program - I had the program already when I installed my 4.5 update
So code came up!!

I do have request though for anyone who has
Mbx4.5 where is the cross stitch program located? I think it was under file but as I have 5 now not sure!!!

Kaye in la

Carole -

The 90/14 needle will work great if you are quilting thru 2 layers of fabric and batting.  No worries about the quilt itself.  If the needle will slide back and forth on the thread- the thread is not to thick for the needle you have.  If it doesn't slide easily without getting stuck when you run the thread thru the eye and then hold one hand higher than the other and then the other hand higher (back and forth) then you need a larger eye on your needle.  Try a top-stitching 90/14 needle.  

I am not sure about the acufil question you ask - but if the thread is the right color and the needle isn't an issue- then go for it.

Tracy in Nashville, TN

--

40wt should be fine. The topstitch 14 recommendation is probably related to the thickness of the quilt. The larger eye would also be less likely to fray the cotton thread.

You didn't do anything wrong. Plug the NEW cable into your computer. Plug the OLD cable into the end of the new one. That will leave the correct end for plugging into the machine.

After you create the album you will have the option to add photos to it.

You didn't say, so I'm assuming that it has been working up until now. Try installing this update: https://www.janome.co.jp/e/e_downloads/digitizer_mbx_v45h.html
If the update is already installed, then shut down Windows. Then turn it on and restart. If you are still having the problem it may be a dongle issue and you'll need to seek Janome Tech Support.

Try flossing out the tension. Fold a narrow strip of fabric in half. Lock the machine. Put the folded edge into the tension slot and floss it back and forth. Hopefully that will dislodge the debris that's in the tension causing inconsistent tension. If that fails you probably need to see your dealer.

I seem to be missing something. On the home page, if I click on photos, there's an opportunity to create a new album, but no "add photo".  If I click on Messages, just messages come up, no "add photo". I will keep trying.

my LucyLu, is behaving badly. First let me say. I’ve changed needles, thread masterpiece and aurfil. The thread continues to break, rethreaded numerous times.  Locked out to thread needle, auto thread didnot work and then suddenly worked.  My real problem the tension is inconsistent, at times upper and then other times .lower.
Cleaned bobbin area and upper thread channel.  I’m attempting straight sewing, ( red bobbin case) nothing fancy.  Any suggestions appreciated.

The dialog photo is in the Marsha folder
thanks
Marsha Ryan

Jim,
I am getting a dialog box asking for access codes when trying to load MBX 4.5, picture in the photos section. Is this a driver issue? Can you please tell me how to fix this?
thanks
Marsha Ryan