Date   

Re: MBX 4.5

Jim Stutsman
 

You didn't say, so I'm assuming that it has been working up until now. Try installing this update: https://www.janome.co.jp/e/e_downloads/digitizer_mbx_v45h.html
If the update is already installed, then shut down Windows. Then turn it on and restart. If you are still having the problem it may be a dongle issue and you'll need to seek Janome Tech Support.


Re: Tension

Jim Stutsman
 

Try flossing out the tension. Fold a narrow strip of fabric in half. Lock the machine. Put the folded edge into the tension slot and floss it back and forth. Hopefully that will dislodge the debris that's in the tension causing inconsistent tension. If that fails you probably need to see your dealer.


Re: Happy Sewer

bhd02@...
 

I seem to be missing something. On the home page, if I click on photos, there's an opportunity to create a new album, but no "add photo".  If I click on Messages, just messages come up, no "add photo". I will keep trying.


Tension

Mary Jo Hirsch
 

my LucyLu, is behaving badly. First let me say. I’ve changed needles, thread masterpiece and aurfil. The thread continues to break, rethreaded numerous times.  Locked out to thread needle, auto thread didnot work and then suddenly worked.  My real problem the tension is inconsistent, at times upper and then other times .lower.
Cleaned bobbin area and upper thread channel.  I’m attempting straight sewing, ( red bobbin case) nothing fancy.  Any suggestions appreciated.


MBX 4.5 photo

Marsha
 

The dialog photo is in the Marsha folder
thanks
Marsha Ryan


MBX 4.5

Marsha
 

Jim,
I am getting a dialog box asking for access codes when trying to load MBX 4.5, picture in the photos section. Is this a driver issue? Can you please tell me how to fix this?
thanks
Marsha Ryan


Thread

Carole O'Mara
 

Is a 40wt (Superior King Tut) thread too heavy to use to quilt a small quilt using Acufil (stipple design)?  Label says:  Use topstitch #90/14.  Is that needle too large to use for an Acufil design?  I've only used 50wt in the past, but this is a perfect color for the quilt.  

Thanks so much,
Carole - Colorado Springs


Re: Using a USB extension cord

Meryl Margolies
 


Re: Question

Jim Stutsman
 

For security purposes the list software obscures part of email addresses. To respond to Marilyn's post about her 15000 for sale email her using this address with the blank spaces removed: sewnqlt21842 @ gmail.com


Re: Question

LindaB 1
 

Interested ! Tried emailing but the email addres is only partial. Where are you from?
--
LindaB


Re: Happy Sewer

Theresa Lindal
 



On Sat, Jan 12, 2019 at 11:28 AM onlinesewing via Groups.Io <onlinesewing=icloud.com@groups.io> wrote:
Photos are easiest to add if you make your post from the group website: https://groups.io/g/onlinesewing-janome
You just click the photo icon in the message window and upload them.
_._,_._,_

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#23524) | Reply To Group  | Mute This Topic | New Topic



Your Subscription | Contact Group Owner | Unsubscribe [tessy.lindal1@...]

I found the picture on google that was cute.  


Re: Happy Sewer

Randi Kemper
 

I would like to know that too!
--
Randi Kemper
Magical Machine Embroidery


Re: Happy Sewer

Jim Stutsman
 

Photos are easiest to add if you make your post from the group website: https://groups.io/g/onlinesewing-janome
You just click the photo icon in the message window and upload them.


Re: Happy Sewer

bhd02@...
 

I'm new at the photo add so not sure if it went. At first two photos were so large I deleted them, then tried adding them as an attachment. It disappeared, so will wait until tomorrow to see if they're approved. The bag is a pattern called Beatle Bag. I removed the bulky closure and replaced it with a simple strap. Maybe someone can advise on the photo adds. Thnx.


Re: Happy Sewer

bhd02@...
 

The manual lists it as 859835101. The zipper foot is 859838001. See page 3.


Re: Happy Sewer

mkeegan651
 

What number is the dual feed foot please.


Re: Happy Sewer

Theresa Lindal
 

Good news, I have not used those feet yet, so just learning quilting and binding.  Do you have a picture of the bag? If not I will just try it out.  Have had my machine for four years and still haven"t used it like I should have.  Not enough hours in the day, that didn't come with the machine, have to talk to Janome.  Thanks

Theresa

On Fri, Jan 11, 2019 at 10:23 AM <bhd02@...> wrote:
I've discovered the small dual feed foot, used it on the application of binding on a sewing bag. It had to go over thick vinyl straps and didn't even flinch. One of the reasons I purchased the 15000 was the dual feed. It is so smooth and easy to install. The extra light also comes in handy, especially when having to remove tiny stitches.


Re: Happy Sewer

HEATHER COWAN
 

I also just used this foot after having the machine three years.  Wow .... I love it.  This machine has so many lovely features.   Short of having stitch regulator and positioning camera ...... what could Janome add. [AccuSetter works but. ... ]
Hugs
Heather

On Jan 11, 2019, at 08:23, bhd02@... wrote:

I've discovered the small dual feed foot, used it on the application of binding on a sewing bag. It had to go over thick vinyl straps and didn't even flinch. One of the reasons I purchased the 15000 was the dual feed. It is so smooth and easy to install. The extra light also comes in handy, especially when having to remove tiny stitches.


Happy Sewer

bhd02@...
 

I've discovered the small dual feed foot, used it on the application of binding on a sewing bag. It had to go over thick vinyl straps and didn't even flinch. One of the reasons I purchased the 15000 was the dual feed. It is so smooth and easy to install. The extra light also comes in handy, especially when having to remove tiny stitches.


Re: Question

Cheryl Paul
 

I think that you will be lucky to be allowed $3000 for your 12000. I traded my 12000 even up for an Elna 860 which was $2,885 - less than $3000 and this was 3 years ago. The 12000 is already 7-8 years old in technology. Why not wait until fall and see if a new machine is launched, then you would be right up to date in technology.

You’d be better to pay cash and sell your 12000 privately on eBay or some other internet selling site.

Cheryl - Saskatoon

4401 - 4420 of 27929