Re: Stitch issue on 7700


I just uploaded 2 pictures in a new album, named Thread Issues.

Yesterday I made a stitch sample, I used the O-foot and put the needle in the far-right position (9.0)

I think what happened is what you described, the tiny loop as if the thread loops around the needle.

I never had this happen before with another machine.


Op 23-03-13 16:32, pjrulo@... schreef:



My question is for the 7700 machine and I'm, hoping you might have some ideas as to what could cause my issue. I'm using Masterpiece thread, accufeed 1/4 inch foot on quilt stitch 93 piecing quilts. I thought the machine needed to be serviced so I took it in for maintenance. The top thread was making a tiny loop on the bottom fabric every once in a while. When it came back from the technician at first it would sew about 2 inches then the stitches would get very tiny and the fabric wouldn't feed thru. I rethreaded, changed the needle, turned it off, turned it on, changed the top tension to 6 and finally it stopped doing this but now it does the little top loop on the bottom side about every 2 inches. I spent most of the afternoon yesterday at the shop. They tried everything, changed the foot, changed the bobbin case, all sorts of other things and finally told me I had to leave the machine. They were going to call Janome. Do you have any idea what could cause this issu
BTW - I love the Volume 1 video guide for the 12000, can't wait to see the next one!


Join to automatically receive all group messages.