toggle quoted messageShow quoted text
Would a size 14 embroidery needle be comparable to a size 14 top stitch needle?
--- In janome12000@..., "Jim_Stutsman" <jim@...> wrote:
Be careful about spraying silicone on thread BEFORE it goes through the tension. Over time the thread can carry the silicone onto the tension disks, where it can build up and begin reducing tension. It's better to apply after it comes out of the tension. There are some after-market products that are tiny sponges which stick to the machine in the thread path. You apply the silicone to the sponge. We've never found it necessary to lubricate the thread though. Using a topstitch size 14 needle is a big help.
As for taking to the roof, remember one has to suffer for one's art!
--- In janome12000@..., "Jo Lynch" <jolynch12@> wrote:
I have not had any problems with Metalic thread on this machine. I give a puff of Silicone on the cone & just feed though the normal thread stand ---- this certainly was not the case with the 10 & 11. Jim I could not see myself climbing on the roof!!!!