Re: AcuEdit & 15000

Joyce Golden

 Make sure computer and machine are connected to same network.  My computer sometimes changes.

On Jun 29, 2022, at 6:18 PM, Fiona Williams via <f.taylorwilliams@...> wrote:

Hi Pixey,

You are correct I meant the send function. I have actually never had to reconnect my machine to my ipad even when we moved and it was working fine until today. I tried everything mentioned below. My machine does not show up except greyed out at the bottom even after refresh. So frustrating. I have re set everything, turned everything on and off no idea what is happening but of course it is happening at the worst time. 
If there are any more ideas I open to trying anything.
Correction with the exception of deleting and reinstalling acuedit as all my designs are stored there and nowhere else. I know I was just reading all the info on backing up and was planning on doing but haven’t 😭.

Thank you


On Jun 29, 2022, at 5:54 PM, Pixey via <pixeyam@...> wrote:

Hi Fiona,
I am stating a new thread on your problem with sending a design to your 15000 and have pasted your original message below.  I know when I get in a hurry or frustrated, I sometimes overlook steps on AcuEdit.

When you say you are checking to see if the machine is listed in the app and it appears but is grayed out at the bottom…

I have found that the grayed out at the bottom shows the last machine connected, not the current active connection.  When you touch the Target Machine icon  (upper right corner icon with the machine and a target) are you seeing your 15000 at the top in blue with an IP address. If not, try touching the refresh circle on the lower right of the Target Machine window.  I generally have to reconnect to it each time I turn it on.  Also, just double checking that the machine is already turned on and connected to Wi-Fi, before you try and connect from the iPad.  

Also, you are mentioning importing the design, I assume you are actually meaning the Send function in the upper left part of the screen. 


On Jun 29, 2022, at 3:04 PM, Fiona Williams via <f.taylorwilliams@...> wrote:

Hi All,

So I have been using my 15000 with acuedit no problem until today. I reset all of my network settings and everything seemed fine. Still would not import a design. When I check to see if my machine is still listed in the app it is except it shows up greyed out at the very bottom. No matter how many times I try to get it to realist my machine it does not. Can anyone offer any suggestions. Wedding embroidery to do and am so frustrated. I didn’t even have a problem when we moved everything worked without me having to reset anything.
Baffled 😭


Join to automatically receive all group messages.