Re: Screw with Sliding Guide Foot
toggle quoted messageShow quoted text
Not true my 7700 had a different type than my 12000 and my 15000. In fact the screw on my 7700 bent my needle bar it was so hard to remove and attach the even feed.
Sent from my Sprint Samsung Galaxy S7.
Within the Janome brand all needle clamp screws have the same thread. Your dealer can probably order another screw, but only if Janome makes the screws available as a replacement part. If you happen to have an old yarn embroidery attachment from the 9000 era, that needle clamp screw might also work.
-------- Original message --------
From: "onlinesewing via Groups.Io" <onlinesewing@...>
Date: 3/10/19 10:23 PM (GMT-05:00)
Subject: Re: [onlinesewing-janome] Screw with Sliding Guide Foot