Hello, Gerd I did not calculate yet. Only after full test and mechanical assembly. David

Hi My name is Marc, callsign f6itu, with a very low technical skill, but really interested in SDR dvlpmt (playing with an Hermes lite V1, building a V2, and I just finished a "red pitaya" based rig be

Hello, people Today I tried the newst version of QUISK in Odyssey-2 mode http://james.ahlstrom.name/quisk/ Some things work not correctly but you can enjoy of work 7 receivers simultaneously. Odyssey

Hi David, I used to have a lay6 file viewer in Linux but I can't find it on the web currently. Could you please convert it to PDF for me? 73 ... Sid.

Hi David, Can't find the earlier emails regarding this problem. Tested on 20m USB and get RF output. As suggested, Paddle into the Key socket in CW mode, no RF output which suggests there is a fault.

Hi David, I try to new firmware of Odyssey_BL_2.0. Run "BootLoader_2.0.pyw" Then Key is on --> TEST bottom pushed --> "Device found" --> Select firmware --> write firmware --> "Erasing Slot1..." --> "

Hello. As I told erlear I try to make a copy of Yaesu 891 amplifier. I assembly a small PCB with preamplifier on RD15 (RD16) and it works perfect ! Only 2 Volts peak needed for 120-130 Watts output. W

Hello Sometimes people ask me if it possible to buy assembled and tested Odyssey-2 right now. At this time I have no plans for assembling more transceivers. I do not have time and opportunities for th

Hi to All! my question: what type is the cw-plug ? mono, stereo ? Can I connect a electronic keyer ? or only hand-keyer ? schematic for connection ? vy73 Gerd

Hi A web store was opened on one of my sites. I have added a Google translator for the most used languages. For buying something you can also write me e-mail. http://www.sdr-deluxe.com/shop/odyssey-1

Hello, people. Alleluia ! The new bootloader uses my own writen Gigabit Ethernet FPGA code ! Try use it, friends http://ody-sdr.com/2018/05/06/the-bootloader-2-0-for-odyssey-2 David

Hi All ! Ody2 has FW 1.10 ANP. I can't connect to PC and operate using PowerSDR_mRX_PS v3.4.8. With Thetis V2.3.11 everything works fine. Has somebody the same problems and even a solution ? Any help

Hi David, I received the front panel today, in excellent order - I didn't ask for insurance and so they didn't open the original panel to photograph the contents. Thanks for sending it to me - don't w

Hi All. Today I can say with confidence that my own writed Ethernet Gigabit code works fine. ARP and ICMP (ping) work perfect. DHCP will not be realised, the new firmware will work only with static IP

Good to hear. Other groups have already gone that way without problems. 73 ... Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Serve

Hello people. in due to fact absolutelly inadequate, non-professional and not ovechat modern requirements the work of Yahoo servises, our group will be transfered to groups.io servise soon. Don't worr

Hello, people. I want to suggest one interesting web-site where you can buy many kinds of transverter's boards. This is not Hi-End technics but it is really cheap. http://transverters-store.com/assemb

It seems intermittent as I just powered off and on again 5 times successfully having not powered off since the last report. I'll� leave it powered off for at least 9 hours to see if there is a diffe

Hello Sid How often will failure start happen if you will do switch on / switch off ? David

The Kickstarter offering is now gone, if I understand well. I read the following, also, “In the future, I'll present also an amplifier(15W), VHF transverter and autotuner ih the similar housing and th