Hi Sherrod. As David said when you click/tap screen ptt button, light on odyssey ptt should come on. When light is on voltage on pin 8 of db9 socket goes high to 3.1 volts.(measured between pins 8 & 9

Hello, I'd like to know how I can get low transition on one of the pins on the DB9 on back of the Odyssey TRX - so I can use that to control a T/R switch. I put my meter across all of the pins(one by

Very nice video David. Thank you. 73 de Ken N9VV -- ¯\_(ツ)_/¯

Hi Andy Thanks very much for the reply. Yes, I enquired before but Ody-II has new hardware and features, as I understand, and I thought they will have to be some changes to the software. -- Best Regar

Thanks very much for the replies. It all sounds great and I could see it as a replacement for the HiQSDR. Looking forward to further information when you are in a position to release it. 73 ... Sid. -

Hello, Sid You can find information on Kickstarter only for Odyssey - I. A compaign with Odyssey-II will be later. It is much better then HiqSDR. You will be able connect Odyssey to that Presselector

Ok David - thanks for the info - look forward to more info later Les -- Using Opera's mail client: http://www.opera.com/mail/

Hello, Les. FPGA is EP4CE55F23C8N ADCs are same - LTC2165

I dont the pictures... it just shows me a spinning wheel.

Looks great. A couple of questions:- * Does the Kickstarter campaign refer to -II or -I? * Is it a drop-in replacement for the HiQSDR? I have a HiQSDR Preselector/MPPA available. 73 ... Sid. -- Sid Bo

Hi David Do you have a list of the devices used in Odyssey II yet - hard to read the number on the Altera device Les VK2DSG -- Using Opera's mail client: http://www.opera.com/mail/

Hi David AND All Read up on past messages regarding changing IP address from instructions from Roger W3SZ and followed them but still have the problem as seen on the picture - have solid orange light

Hi. I'm selling my own Odyssey TRX, USB version, 0.280 ppm TCXO installed. Write me to dfainitski@... David, N7DDC

Hi, Is the Odyssey transceiver available for ordering? 73, Jim N7IHQ

Has it been looked at? 73 ... Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket

Hi all, I only recently came accross Odyssey ddc/duc transceiver and it looks rather promising to me as a base building block for homebrewtransceiver. But there has to be an API to allow application d

Hi David Nice to hear of the new project with 2w output plus 30w amp and tunCan you supply details of the FPGA version and the ADC versions yet? My Odyssey TRX is working fine with the 10w amp - I con

I apologize for the chaos that may ensue when a latecomer poses a question. But, having failed to notice and participate in the KickStarter funding, is there any way to become a part of this project?

Hi All. Using Pi3 with Raspbian (Pixcel) software, Odyssey sdr using new pihpsdr (twin display) software,plus wxjt-x v1.7.0/wspr+cheap usb sound card for audio input.(at the moment receive only). Work

Hi All, Is that possible to run this transceiver in remote area use wifi connection ?