The Announcement PDF says 10-13V DC input. Does that rule out supplying +13.8V from the station P.S? 73 ... Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mai

Thanks David! Thats good, so I can use my twin speakers with Ody-II. -- Best Regards Neoklis - Ham Radio Call:5B4AZ http://www.5b4az.org/

But can you unsolder and resolder large multi-pin components like FPGA, if it is surface mount? No damage to component? I am not sure, is there an audio amplifier on the ody-II board? I already have a

Thanks David, I guessed that was how it possibly worked. Excellent work on the built-in speakers. 73 ... Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainfr

Hi David, I would like a board and enclosure. I have signed up with shipto.com Please confirm the total I need to pay via Paypal is $767 US. 73 ... Sid. -- Sid Boyce ... Hamradio License G3VBV, Licens

I carried out laser marking on the panel of Odyssey 2. After this, I do not have a milling device, so I have to process the panel by hand. Perhaps, my arms will become muscle pain afterwards. 73. Leo

Hi people. I have made the new firmware with the simple old HPSDR protocol. It is equal to Angelia board firmware. 7 receivers are avalaible simultaneously (what a difficult word!). Read more http://o

Hi David Thanks for keeping us informed. I would like to take the opportunity to ask here about the communication protocols or API that is used to control odyssey etc via Ethernet. I like to write my

Hi All, Assembly of Odyssey 2 PCB board is almost completed. I tried to receive it but I can not communicate with Thetis. As another problem, the OELD display is not displayed. The power switch can no

The specs say logic level 3.3-5 Volts. I am assuming this is SQUARE WAVE or does it matter? Some GPSDO's only do SINE.

Lots of new information about the hardware of the Odyssey II now here: http://ody-sdr.com/2017/10/15/location-of-the-components-on-the-odyssey-2-transceiver-board/ Thanks to David for this. Regards Sa

Hi David, Ihave a problem in my Odyssey TRX SDR DDC/DUC Tranceiver, i feed whit 12 V but it isn´t work only flashing the leds and turn off. I use a power supply of 12 V an 1.5A. Any idea what is the p

I am sure David will help this fellow. I wanted to comment that I was privilidged to be a Beta Tester of the ODY-II and submitted 5 video's of my *success* in every regard. <URL: https://www.youtube.c

Hi David¡ Thanks for the project, I thinks Odyssey will be a very impressive rig. When Do you think it`ll be ready??. 73 Rafa EA7HPM

Hi David. First congratulations on Odyssey 2, I doubt if i will be able to afford one,due to 20%VAT, plus import duty, plus £8 to post office to collect the money.(Unless you send it in separate small

Hi David Congratulations on the fine job you are doing on Odyssey 2 - looks a very interesting project Ken N9VV and I had a good discussion about it and the earlier Odyssey earlier today on Skype - an

Odyssey-II SDR Transceiver great QSO with Vin W1IDL on the shores of Lake Huron <URL: https://youtu.be/_b83zdo7aC0 > 73 de Ken N9VV-- ¯&#92;_(ツ)_/¯

Excellent news Ken, Lucky You! 73 ... Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist,

Please join me in Congratulating David N7DDC on his creation of the new Odyssey-II SDR Transceiver. Tonight I completed my first CW QSO on 30M 10.117 with W1ZT in MA (885mi). I was running about .9W t

20M Amateur Radio Band under very poor band condx due to Solar X8.2 CME <URL: https://youtu.be/BS6Qm8Mg59c > 73 de Ken -- ¯&#92;_(ツ)_/¯