Topics

Firmware 1.3.5 for Odyssey

David Fainitski
 

Some problems for the key processor resolved in this firmware. Now the radio signal's delay  works correctly in all the available range from 0 to 250 ms. It is possible for any speed manipulation  up to 60 WPM - no degradation and  disappearence of the first characters.


Thus, you can work comfortably of key forgetting such a thing as a pedal. However, in some cases, the transmission control with pedal is a must and this firmware is activated the medium contact of microphone jack  for its connection.


The first contact is used for microphone signal,  the middle - for connection of a pedal. The contacts of a pedal are connecting  between the middle and the common terminals of jack. You can made an adapter for the simultaneous use of a pedal and microphone.


If you don't need a pedal you may desolder  both  resistors and solder one of them between the internal  pads.


http://www.sdr-deluxe.com/downloads/ODY/manipulator_1.jpg


The firmware also uses an improved algorithm for registration of key presses.


This firmware has one  limitation - the second receiver works only up to 192k , so when you are  working in 2-receivers mode with PowerSDR should not be selected  384k in settings. For a  1-receiver mode  there are no restrictions.



Dfinitski/Odyssey_TRX