Hi David Cool. I'll try this soon. I have ody with me, but no yaesu mic, because tx is not finished on my board. So if I have time, I can make some tests with different software. Today I installed

Hello, Reto. Happy vacation. MCU fw version , bootloader fw version and working fw version should be correspond each other. In your case just use latest versions of all. Yes, you can have AOP and ANP

Hello, I would like to share my project about Odyssey 2 hopping that can be useful to someone else. I wrote from scratch a new programmer, a new MCU firmware, and made changes to the Bootloader and

Hi David Maybe I have this mic. I have a look at home. I think the idea of the different slots is to have different firmwares loaded. Is it possible to have an aop and anp software programmed at

Hello David and Rob Looks very interesting all the solution, also the case. And the mini hiqsdr could also be a project. It's easier to build I think than the ody2. So the people who don't want

Yes, for QRP, portable use on batteries, the Raspberry Pi 4 with 4GB and 1.5GHz quad-core running PiHPSDR seems to do well with an advanced SDR like Odyssey-2. Ken N9VV has a video on

Hello, Reto. I have deleted those images from my cloud couple weeks ago. Odyssey is very powerfull SDR transceiver, that is not too smart create bounded standalone project especially based on

Hello, Reto. To access the other slots use MH-31 dynamic microphone by Yaesu. You can by it as a part in HAM-stores or E-Bay. When Ody in bootloader mode use short pressing buttons Up and Dwn to

Reto, In Windows I think Thetis SDR seems to be the best option: https://github.com/TAPR/OpenHPSDR-Thetis/releases Demo with Odyssey-2: https://youtu.be/w7DFKCzNjlM 73, Rob

Reto, I am also planning to use Odyssey-2 with Raspberry Pi 4. Here are the links I used: Case: https://smarticase.com/products/smartipi-touch-2 Reference: http://wu2o.dyndns.org/wu2o_pi_4.html Heat

Hi David Is this image averywhere availlable? The link above is broken. My plan for the odyssey is to make a standalone TRX with odyssey board, battery, RasperyPI oder OrangePi, 7" Display mit

Does anybody knows, how to install python and tkinter under windows 10, so that works the bootloader.pyw? I have no chance, get always errors. For initial test I use a Ubuntu pc for running the file

Hi Rob, I'm nearly finished with the BOM. But I also found one on Davids board, a russian om made it and it's quite good with different supplieres (digikey, mouser, ali, and so on). Also links to the

Reto, This is great news and congrats for your effort!! Also many thanks to David for his support and patience!! Please send us your BOM for our reference. I have the same PCB model that you have and

Hi David, Wow!! It works. The problem was my headphone.... It has a switch which disconnect the connection if it's not on the head...difficult to explain, but this switch disconnects the headphone

Hi David, Thanks ;) I'm also happy that at least the FPGA is not damaged. :) But I have another problem I think. I allready Pluged in a headphone to the key plug, but same thing. I connected the

Hello, Reto My congrats, FPGA is alive. According to your video, FPGA is loadind and reset cyclically as result of wrong sequence of firmware loading. For now you have loaded bootloader 2.1 to FPGA so

Hello David I changed the resistor network to 10k. I think there was also a short which I don't have seen. Now the oled shows me the correct value. Fpga seems to work. But network connection is of.

Hi David Thanks for the hint. Maybe I miss a hint about the resistor network. I soldered 4 7k resistor network there, but I also ordered 10k and did not know why. The label shows 4.7k and so I took

Hello, Reto. That is bad news, seems like FPGA won't loading from memory. Please make shure that 10k array next to flash memory is soldered well and also Verify bird is activated while you are