Hi New article on the web-site http://ody-sdr.com/2017/09/10/odyssey-2-technical-characteristics/

Hi New article on the web_site, overview of the first firmware http://ody-sdr.com/2017/09/10/overview-of-the-first-firmware-for-the-odyssey-2-transceiver/

Hello dear Sascha, Wonderful that you are also playing with pihpsdr. I recently rewrote the User Guide to change all the MENU and Toolbar display options. John Melton has been very busy this Summer

20M Amateur Radio Band under very poor band condx due to Solar X8.2 CME <URL: https://youtu.be/BS6Qm8Mg59c > 73 de Ken -- ¯&#92;_(ツ)_/¯

Please join me in Congratulating David N7DDC on his creation of the new Odyssey-II SDR Transceiver. Tonight I completed my first CW QSO on 30M 10.117 with W1ZT in MA (885mi). I was running about .9W

Excellent news Ken, Lucky You! 73 ... Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff

Odyssey-II SDR Transceiver great QSO with Vin W1IDL on the shores of Lake Huron <URL: https://youtu.be/_b83zdo7aC0 > 73 de Ken N9VV-- ¯&#92;_(ツ)_/¯

Hi David Congratulations on the fine job you are doing on Odyssey 2 - looks a very interesting project Ken N9VV and I had a good discussion about it and the earlier Odyssey earlier today on Skype -

Hi David. First congratulations on Odyssey 2, I doubt if i will be able to afford one,due to 20%VAT, plus import duty, plus £8 to post office to collect the money.(Unless you send it in separate

Hello, David I will send it from USA so you will don't need to pay VAT. Import duty can be decreased to minimum. Concerning my quisk.py - you are using the QUISK 4.1.1 but my version based on

Hi David¡ Thanks for the project, I thinks Odyssey will be a very impressive rig. When Do you think it`ll be ready??. 73 Rafa EA7HPM

Hello, Rafa I am working on it every day. Best regards, David

Hey David, really looking forward to this. Lots of other people who are interrested too. Keep on the good work :) 73 de Sascha, DH5SL

Hi David, Ihave a problem in my Odyssey TRX SDR DDC/DUC Tranceiver, i feed whit 12 V but it isn´t work only flashing the leds and turn off. I use a power supply of 12 V an 1.5A. Any idea what is

I am sure David will help this fellow. I wanted to comment that I was privilidged to be a Beta Tester of the ODY-II and submitted 5 video's of my *success* in every regard. <URL:

Hello. I guess your power suply is giviing more then 12 Volts or less then 10. Provide more info about that. Best regards David

Lots of new information about the hardware of the Odyssey II now here: http://ody-sdr.com/2017/10/15/location-of-the-components-on-the-odyssey-2-transceiver-board/ Thanks to David for

The specs say logic level 3.3-5 Volts. I am assuming this is SQUARE WAVE or does it matter? Some GPSDO's only do SINE.

Hi people. I am working now on firmware. Simple old openHPSDR protocol with 7 independed receivers and Gigabit LAN will be present soon. David

Hi. I think does not matter. Set your SDR programm on 10.000 MHz and zoom this to maximum. Connect reference freq. If stick shifted - it is work. Best regards. David