Here's the link for the case. https://cloud.starnet.ch/index.php/s/iSs22BdAZ3JgTis Vy 73 Reto

Hi YL2GVC I allready shared the files I used for my Projekt here. Everywhere in this group. But I need to modify manually some parts because of small initial errors I made at construction on the PC.

Wow Reto!!! I didn't read for some time this thread, it is very impressing what you did ;-) I have just one question, could you share your case project at Schaeffer Germany ;-) There will be folk who

Hi. Using a multimeter, try to find a short before and after the main 5V DC/DC TLV62163. Most likely you will need to remove it and change if the short is disapeared after that. Check the power

Hi, My Ody2 just died today. Impossible to turn on. My initial search for faults ended with the self-resettable fuse next to the power cord gets extremely hot upon inserting the power cord (and

Hi Josu, Because I close the Ody2 hardware project now I search for new building stuff. I think the software in the FPGA needs a little bit of adjustment for the ptt inhibit function to work 100% but

Thanks a lot, Reto. Your photos will help us a lot with new ideas for our next projects. 73. Josu Enviado desde Yahoo Mail para Android

About the costs, this is difficult to say I don't list all the costs. With all my experiments with different transverters, the case and Andromeda controller and Intel nuc i7, 16gb ram, 512gb ssd, leo

Hi Aivars Here are some unsorted pictures of my project. Also different stages and also with prototype Boards. https://cloud.starnet.ch/index.php/s/8CYY4KKBbm5FzH5 Vy 73 Reto

Reto, may be tell us, where and how did you make? And how much did it cost to you? 73! Aivars.

Hi Josu The inside is not as beauty as the outer look:) But I have some pictures. Vy 73 Reto

AWESOME, Reto!! Great Job. Could you send us more photos from inside to learn more? 73. Josu Enviado desde Yahoo Mail con Android

Here some pictures of the nearly finished project.

Hi David, Also solved. We have the wrong type of EEproms. WIthout MAC addres. Because this was a "Replacement" Part. But it isn't. Very annoying at the moment for ordering parts. Much of them are not

Hi David, from whwew the Ody2 get's the MAC Address? I read something in the Eterhnet Phy that the Mac Address vomes from a Memory chip. If this is the case, could it be that the memory chip fails

I used standard ip. 192.168.2.160. And set Fixed Ip for Ethernet device in pc, 192.168.2.100, like I did on every ody2 i programmed. Programming of firmware to slot 1 or 2 works. As in Bootloader mode

Write IP before use the board, even if you want to use standard IP .

Hi, Reto The kind of BAT54 is marked on the board, you can see there letter S. Bad MAC address possibly is problem with 6 pin small microchip memory IC . Right side from FPgA.

Firmware now is loaded. Bootloader Program works. But No connect to Thetis or SDR-Console. Maybe because the Ody 2 has a crazy MAC Address: Hardware seems to be ok, Ethernet is connected with 1

Hi David It was the Schottky diodes! Now Fpga starts! Because of Delivery problems, we ordered a "replacement" part, which was not s replacement, it was another part. The wrong one. Shame on