Date   

Re: [ody-sdr.yahoo.com] Re: Setting up Odyssey [1 Attachment]

Les Keppie <leskep@...>
 

Hi David

All working now - thank you - no way to put an antenna to it yet but a paper clip gets me the local bcst stn hi

Now to wait for some SMA  cables to connect it up to the system - Monday I think for the cables

Many thanks
Les




On Wed, 18 May 2016 18:07:47 +1000, rolin791@... [ody-sdr] wrote:

 
[Attachment(s) from rolin791@... [ody-sdr] included below]

Hello, Les


You need to set Ethernet connecttion to static IP 192.168.2.100 look the pic
In PowerSDR you need set Odyssey's IP 192.168.2.160 or don't need set anything. PowerSDR can search Odyssey automatic.

ZeusRadio still avalaible here https://cloud.mail.ru/public/Lv4G/zg3CrhUow


 



--
Using Opera's mail client: http://www.opera.com/mail/


Re: Questions on Odyssey

David Fainitski
 

Hello Rodger

Please use now only static IP connection 192.168.2.xxx (except 160-161)
The next firmware will be able to set any IP adress through Ody Key Master programm.

Odyssey has the implemented openHPSDR protocol with  a little restriction - only 1 or 2 receivers simultaneously. 

Odyssey also has owner protocol, much easier, Hiqsdr based.
I will make a diskription at soon.
 


Re: cusdr64

David Fainitski
 

Hello, Dave

The CuSDR works 3 seconds  as normally and shows worked panadapter or no ?


Re: Setting up Odyssey

David Fainitski
 

Hello, Les

You need to set Ethernet connecttion to static IP 192.168.2.100 look the pic
In PowerSDR you need set Odyssey's IP 192.168.2.160 or don't need set anything. PowerSDR can search Odyssey automatic.

ZeusRadio still avalaible here https://cloud.mail.ru/public/Lv4G/zg3CrhUow


 


cusdr64

David Turner
 

Hi all
 I have installed Cusdr64 but it runs for about  three seconds then stops. Anyone know the settings for Odyssey.(Linux no Windows)


Dave.
g0vvf


New file uploaded to ody-sdr

ody-sdr@...
 

Hello,


This email message is a notification to let you know that
a file has been uploaded to the Files area of the ody-sdr
group.


File : /ody instructions.txt
Uploaded by : vk2dsg <leskep@...>
Description :
Setup info


You can access this file at the URL:
https://groups.yahoo.com/neo/groups/ody-sdr/files/ody%20instructions.txt


To learn more about file sharing for your group, please visit:
https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_US&id=SLN15398


Regards,


vk2dsg <leskep@...>


Re: [ody-sdr.yahoo.com] Questions on Odyssey

Les Keppie <leskep@...>
 

Hi Roger
Not yet got mine running - can you share your HPSDR General/Hardware Config settings with me - I think I have them wrong
This is what I am trying but not seeing the Ody

VK2DSG Les




On Wed, 18 May 2016 14:27:08 +1000, 73w3sz@... [ody-sdr] wrote:

 

Hi,

I've received my Odyssey and am having fun with it with several softwares.  I have several questions.  Thanks in advance!

1.  What is the pinout for the DB9 connector?
2.  How can I change the IP address of the Odyssey?
3.  I use my own software in addition to the "usual" openHPSDR software.  Can I treat the Odyssey as a Hermes with version 2.9 firmware when I write my code?  Are there any Hermes 2.9 firemware features that are unavailable with the Odyssey?

Thanks again and

73,

Roger Rehr
W3SZ





--
Using Opera's mail client: http://www.opera.com/mail/


Re: [ody-sdr.yahoo.com] Questions on Odyssey

Les Keppie <leskep@...>
 

Hi Roger

Maybe this will help

Les VK2DSG

On Wed, 18 May 2016 14:27:08 +1000, 73w3sz@... [ody-sdr] wrote:

 

Hi,

I've received my Odyssey and am having fun with it with several softwares.  I have several questions.  Thanks in advance!

1.  What is the pinout for the DB9 connector?
2.  How can I change the IP address of the Odyssey?
3.  I use my own software in addition to the "usual" openHPSDR software.  Can I treat the Odyssey as a Hermes with version 2.9 firmware when I write my code?  Are there any Hermes 2.9 firemware features that are unavailable with the Odyssey?

Thanks again and

73,

Roger Rehr
W3SZ





--
Using Opera's mail client: http://www.opera.com/mail/


Questions on Odyssey

73w3sz@...
 

Hi,

I've received my Odyssey and am having fun with it with several softwares.  I have several questions.  Thanks in advance!

1.  What is the pinout for the DB9 connector?
2.  How can I change the IP address of the Odyssey?
3.  I use my own software in addition to the "usual" openHPSDR software.  Can I treat the Odyssey as a Hermes with version 2.9 firmware when I write my code?  Are there any Hermes 2.9 firemware features that are unavailable with the Odyssey?

Thanks again and

73,

Roger Rehr
W3SZ



Setting up Odyssey

leskep@...
 

Hi All

Just received my Ody on Monday and have just got around to trying to set it up on ZS1 software but the version I have on the computer is looking for a USB connection to it - so no go there


The link David supplied does not work either


Download the trial version of ZeusRadio here httpscloud.mail.rupublicLv4Gzg3CrhUow


I also have the latest version of PowerSDR mRX v3.3.7 on my computer and I am using Davids instructions


After connecting LAN version go to connections settings and set in TCPIP properties manually mode with 

IP 192.168.2.100 and subnet mask 255.255.255.0.


I need some help to get the settings right for this screen - where do I put in the subnet mask settings

At moment I have a steady orange light  and an occasionally blinking green light on the ethernet socket
which is plugged into a switch that I used for my Anan-100D

Any help appreciated

Les VK2DSG



Re: [ody-sdr.yahoo.com] Odyssey Transciver Owners Review

Les Keppie <leskep@...>
 

Hi   -   I am still waiting on delivery of my Odyssey - hopefully next week

I intend to wait until David makes the matching Linear as per his published material - I need only 14 watts to drive my BLA 350 to full output
In the meantime when I get it I shall use it only for RX and get to know it

Les VK2DSG

On Thu, 12 May 2016 02:28:56 +1000, sam.allmighty07@... [ody-sdr] wrote:

 

 1HOW DO YOU LIKE YOUR NEW RADIO??                                                                                             2 WHAT LINEAR AMPLIFIER ARE YOU USING OR RECOMMEND ??




--
Using Opera's mail client: http://www.opera.com/mail/


ODYESSEY TRANSCIVER REVIEWS

Sam Allmighty
 

1 How do you like your ODYSSEY Transceiver?                                                                                           2 Which linear amplifier will you run with it ?



Odyssey Transciver Owners Review

Sam Allmighty
 

 1HOW DO YOU LIKE YOUR NEW RADIO??                                                                                             2 WHAT LINEAR AMPLIFIER ARE YOU USING OR RECOMMEND ??


Two transceivers for selling

David Fainitski
 

Hello. I have now two Odysseys for selling by nominal price. It is LAN version in housing. VNA bridge inqluded.

Please ask me to dfainitski@...


Thank you.


http://www.sdr-deluxe.com/downloads/ODY/2ody.jpg



Re: Future Plans ?

AA6I
 

Congratulations ! We hope to hear more from you.   AA6I


Re: eth0/wifi

David Fainitski
 

Hello, Dave.
The KEY connector has three contacs -Ground, Contact 1, Contact 2.
Make a short circuit between contact and ground for using.

In simple mode, CW, Contact 1 is straight key, Contact 2 PTT.
In iambic mode CW, Contact 1 is Dot, Contact 2 is Dash
In SSB and other modes, both contacts are PTT.

Iambic mode can use with PowerSDR, ZeusRadio and QUISK + OKM ( Odyssey Key Master)
All this programms work under Windows.

Under Linux try to use GHPSDR Ghpsdr3 - HPSDRwiki


or QT Radio  QtRadio - Operation - Ghpsdr3 SDR project


 

 


Re: eth0/wifi

David Turner
 

Rolin.

I have looked on google many times, but this time found the answer,Open network connections,change to ivp4, tick box,(Bottom left) click enter routes click boxes, now working OK.(now on wspr map)Just got to get it to transmit,
Is key socket three connections, if so which do you use.


Dave.
g0vvf


Re: Future Plans ?

David Fainitski
 

Hello freands.

This day divided my life to "before" and "after".  Today I am and my family are won the GreenCard 2017 of USA (!!!). It will my third immigration.

I don't know what happens with this project in near future. I hope that I present the first prototype of HF Amp at soon.



Re: Pi3

David Fainitski
 

Hello Dave.
Yes, this problem is famous and happens sometimes with Windows and Linux.
Notable that on my latest Windows 10 and Orange PI PC with the Ubuntu Vivid Lxde there is no this problem. 
This problem exists because of  incorrect setting metrics for the connections.
The system is not understending  which of them primary and secondary.

Please use Google for searching a solution.

I can saggest to you to try also openHPSDR programm for Android devices by John Melton. He can present also a new soft under RPI on the nearest Fridrichshaffen.
 


Pi3

David Turner
 

Rolin

Sorry have no video camera,its not perfect but it does work, drops out occasionally similar to using
odyssey with wifi only. The biggest problem I have is I am unable to use internet,when odyssey is connected to computer,
so unable to use WSPR, if anyone knows the solution to this it would be appreciated.(Linux only no windows.)

   
    Dave
g0vvf