Date   
Re: New firmware 1.20 ANP for Thetis 2.6.7

David Fainitski
 

Sorry, rbf file is here

New firmware 1.20 ANP for Thetis 2.6.7

David Fainitski
 
Edited

Hello, people.
There is new firmware based on the latest 12.0 firmware for Angelia (K5SO is autor).
It should to work fine with new version of Thetis 2.6.7

Link for downloading Thetis - https://github.com/TAPR/OpenHPSDR-Thetis/releases

Unfortunually, ATU control still does not work in this version too.

Thetis does not set General Packet byte 58 bit 1 when you push down Tune button in Thetis.

The Tune signal was commented in K5SO verilog code.

So as is. I can not to do nothing with this.

Tell me know if you will find mistakes. This is only beta version.

David

Re: sourcing Ody components

Marc olanie
 

Thank you David. That was not obvious 😊

 

That’s clear now. I used to protect my receivers with such a trick when I was SWL… many years from now

>The bulbs located close to RF connectors ADC1 and ADC2

 

I was trying to locate them using the pictures of you blog… I spot the location  on the pcb, on the left side of each SMA.

 

Tnks again. Be sure I’ll ask further stupid questions, as long as I don’t have the whole picture in my brain.

73’

 

Marc f6itu

 

 

 



 

Re: sourcing Ody components

David Fainitski
 
Edited

Hello, Mark
These two bulbs work here like fuses.
If 100W from transmitter would go to RF input, the bulb will burned.
Or, if power level will be around 20-50W, the bulb will to glow.
You can short bulb's socket but if something will go wrong you will forced to change more other components, much more expensive.

The bulbs located close to RF connectors ADC1 and ADC2

David.

Re: sourcing Ody components

Marc olanie
 

Many thanks Christian

 

Great news… I think I already have a bunch of such small I2C driven Oled displays in my junkbox.

 

About the bulbs, my question was not concerning the sourcing  (it’s written in the BOM anyway), but its function. Where is physically located this bulb in the rig ?  what is it used to ? If it’s a simple light, a white LED would probably be enough (and I’ll never have to change it in the future) .

 

73’

 

Marc f6itu

 

De : ody-sdr@groups.io <ody-sdr@groups.io> De la part de YO3IUL via Groups.Io
Envoyé : lundi 3 juin 2019 14:16
À : ody-sdr@groups.io
Objet : Re: [ody-sdr] sourcing Ody components

 

Re: sourcing Ody components

YO3IUL
 

sourcing Ody components

Marc olanie
 

Hi happy SDR users

I'm begining the "component hunting game" for my Ody 2... I'm afraid it won't be the only message of this thread. 
- Which kind of Oled display (ref if possible) do you use, as this device is not in the BOM 
- Who knows the location, utility and function of these mysterious "bulb" ref CM8097 we can see in the BOM ? I didn't used such components for more than 35 years (excepted for a demo of a Wien bridge oscillator) 
73'
Marc f6itu

Odyssey 2 SDR

dlwaddel@netzero.net <dlwaddel@...>
 

Is there any interest in Odyssey 2 kits?

I would propose having boards made, all the 17 or so QFN and the BGA components installed. All the other SMT components can be hand soldered. I could do a bulk buy of parts and put them into kits.

I have no idea what the cost would be. I know that when I priced all the parts to complete one of Davids partially assembled boards together, I cam up with about $550, so I expect the cost of a kit would be a little higher due to the cost of having the QFN and BGA parts installed by someone with the equipment to do that.

If interested in a kit, please let me know at dlwaddel@.... If there is enough interest, I will investigate further.

Don
K3DLW
____________________________________________________________
Top Gut Doctor: I Beg Americans To Throw Out This Vegetable
dr-pedre-md.com
http://thirdpartyoffers.netzero.net/TGL3231/5ccc54262750b54252b60st04duc

Re: Odyssey 2 SDR kit

dlwaddel@...
 

Has been sold.

Don

Please note: message attached

From: "Peter Ide-Kostic" <on7yi.pik973@...>
To: ody-sdr@groups.io
Subject: Re: [ody-sdr] Odyssey 2 SDR kit
Date: Mon, 29 Apr 2019 11:14:29 +0900


____________________________________________________________
Brilliant Trick "Melts" Body Fat Overnight! Do This Tonight
LifeBluHealth
http://thirdpartyoffers.netzero.net/TGL3231/5ccaf10dddd2710c4ff5st03duc

Re: next preorder batch ?

David Fainitski
 

Sorry, Marc :)

Re: next preorder batch ?

Marc olanie
 

Hi David

(I’m not Doug, I’m Marc :- ))   )

I just sent you a paypal order… I will play the “in between” guy for this project

Don’t worry, we are not interested in fully assembled boards, as we have a nice and efficient reflow oven and a professional “manual”  pick and place station.

 

Wish you a nice 1st of May 1

 

73’

Marc

 

De : ody-sdr@groups.io <ody-sdr@groups.io> De la part de David Fainitski via Groups.Io
Envoyé : mercredi 1 mai 2019 03:40
À : ody-sdr@groups.io
Objet : Re: [ody-sdr] next preorder batch ?

 

Hello, Doug

I still have couple pre-assembled boards for 50 $ but I have no plans to make full assembled boards.

David

On Mon, Apr 29, 2019 at 11:40 PM, Marc olanie wrote:

A question for a friend of mine : do you intend to run a new batch of pre-assembled Odyssey boards (the one sold at $50 on your web site) ? 

Re: next preorder batch ?

David Fainitski
 

Hello, Doug

I still have couple pre-assembled boards for 50 $ but I have no plans to make full assembled boards.

David


On Mon, Apr 29, 2019 at 11:40 PM, Marc olanie wrote:
A question for a friend of mine : do you intend to run a new batch of pre-assembled Odyssey boards (the one sold at $50 on your web site) ? 

next preorder batch ?

Marc olanie
 

Hi David
A question for a friend of mine : do you intend to run a new batch of pre-assembled Odyssey boards (the one sold at $50 on your web site) ? 
Cheers
Marc f6itu

Re: Odyssey 2 SDR kit

Peter Ide-Kostic
 

Please wite to me pm, with the price that you ask. Thanks 73.


On Mon, 29 Apr 2019, 11:06 , <dlwaddel@...> wrote:
Odyssey 2 SDR kit for sale. Partially assembled board (purchased with some parts installed) and parts to complete the installation (according to the Odyssey 2 parts list). See the web site at "http://ody-sdr.com/" for additional information. Asking $550 including shipping within the USA. Foreign shipping will add $10 to the price. If interested, contact off list at dlwaddel@....
 
I purchased the parts intending to assemble a system, but have since changed my mind. After all, I have two Hermes systems working. :))

Don

Re: Schematic - Odyssey 2 SDR

David Fainitski
 

Hello, Doug

There is no schematic for this project and you will need schematic for correct installing components on the board.

All needed info you can find here http://ody-sdr.com/2017/10/15/location-of-the-components-on-the-odyssey-2-transceiver-board/

David

Schematic - Odyssey 2 SDR

 

I purchased a PC board for this project, and have all the components yet to be placed on the board. I've looked around for a schematic for this design, and found only a block diagram. It's going to be rather difficult troubleshooting without a schematic. Where might I find the schematic for this board?
-Doug, W6DSR

Odyssey 2 SDR kit

dlwaddel@...
 

Odyssey 2 SDR kit for sale. Partially assembled board (purchased with some parts installed) and parts to complete the installation (according to the Odyssey 2 parts list). See the web site at "http://ody-sdr.com/" for additional information. Asking $550 including shipping within the USA. Foreign shipping will add $10 to the price. If interested, contact off list at dlwaddel@....
 
I purchased the parts intending to assemble a system, but have since changed my mind. After all, I have two Hermes systems working. :))

Don

Re: wsjt-x and Odyssey 2

Kurt Poulsen
 

Hi David

I already do, thank you.
I also fancy the SDR Console it work fine as well

Kind regards

Kurt

 

Fra: ody-sdr@groups.io <ody-sdr@groups.io> På vegne af David Fainitski
Sendt: 2. april 2019 15:36
Til: ody-sdr@groups.io
Emne: Re: [ody-sdr] wsjt-x and Odyssey 2

 

Hello, Kurt

Use Thetis, not PowerSDR

David.

Re: wsjt-x and Odyssey 2

David Fainitski
 

Hello, Kurt

Use Thetis, not PowerSDR

David.

Re: wsjt-x and Odyssey 2

Kurt Poulsen
 

Hi Alex

Thank for responding. I will see if PowerSDR work with my firmware version

Kind regards

Kurt

 

Fra: ody-sdr@groups.io <ody-sdr@groups.io> På vegne af Alex Malyava - K2BB
Sendt: 1. april 2019 19:07
Til: ody-sdr@groups.io
Emne: Re: [ody-sdr] wsjt-x and Odyssey 2

 

To answer your question - yes, it is possible. We were running FT8 using Odyssey 2 in 5R8UM Madagascar expedition.

How to do it - I have no idea, it was my friends radio and responsibility.

I remember that we were running PowerSDR, for FT8 - we started with JTDX and then switched to MSHV.

That's about it.

 

 

On Mon, Apr 1, 2019 at 9:27 AM Kurt Poulsen <kurt@...> wrote:

Hi All
Have anybody used the Ody 2 with wjst-x / FT8 and found a way to interface. I have only seen a possibility to use a second sound card (USB) and vox controlled operation.
I use SDR Console which work great with Ody2
Kind regards
Kurt de OZ7OU