|
New firmware 1.20 ANP for Thetis 2.6.7
Hello, people.
There is new firmware based on the latest 12.0 firmware for Angelia (K5SO is autor). It should to work fine with new version of Thetis 2.6.7 Link for downloading Thetis - https://github.com/TAPR/OpenHPSDR-Thetis/releases Unfortunually, ATU control still does not work in this version too. Thetis does not set General Packet byte 58 bit 1 when you push down Tune button in Thetis. The Tune signal was commented in K5SO verilog code. So as is. I can not to do nothing with this. Tell me know if you will find mistakes. This is only beta version. David
|
|
|
|
Re: sourcing Ody components
Marc olanie
Thank you David. That was not obvious 😊
That’s clear now. I used to protect my receivers with such a trick when I was SWL… many years from now
>The bulbs located close to RF connectors ADC1 and ADC2
I was trying to locate them using the pictures of you blog… I spot the location on the pcb, on the left side of each SMA.
Tnks again. Be sure I’ll ask further stupid questions, as long as I don’t have the whole picture in my brain. 73’
Marc f6itu
|
|
|
|
Re: sourcing Ody components
Hello, Mark
These two bulbs work here like fuses. If 100W from transmitter would go to RF input, the bulb will burned. Or, if power level will be around 20-50W, the bulb will to glow. You can short bulb's socket but if something will go wrong you will forced to change more other components, much more expensive. The bulbs located close to RF connectors ADC1 and ADC2 David.
|
|
|
|
Re: sourcing Ody components
Marc olanie
Many thanks Christian
Great news… I think I already have a bunch of such small I2C driven Oled displays in my junkbox.
About the bulbs, my question was not concerning the sourcing (it’s written in the BOM anyway), but its function. Where is physically located this bulb in the rig ? what is it used to ? If it’s a simple light, a white LED would probably be enough (and I’ll never have to change it in the future) .
73’
Marc f6itu
De : ody-sdr@groups.io <ody-sdr@groups.io> De la part de YO3IUL via Groups.Io
Hi Marc, The LCD is OLED 0.91', 128x32 pixels, 5v. For exampme here: Bulb find here:
73, Christian, de yo3iul
|
|
|
|
Re: sourcing Ody components
YO3IUL
Hi Marc, The LCD is OLED 0.91', 128x32 pixels, 5v. For exampme here: Bulb find here: Christian, de yo3iul
|
|
|
|
sourcing Ody components
Marc olanie
Hi happy SDR users
I'm begining the "component hunting game" for my Ody 2... I'm afraid it won't be the only message of this thread. - Which kind of Oled display (ref if possible) do you use, as this device is not in the BOM - Who knows the location, utility and function of these mysterious "bulb" ref CM8097 we can see in the BOM ? I didn't used such components for more than 35 years (excepted for a demo of a Wien bridge oscillator) 73' Marc f6itu
|
|
|
|
Odyssey 2 SDR
dlwaddel@netzero.net <dlwaddel@...>
Is there any interest in Odyssey 2 kits?
I would propose having boards made, all the 17 or so QFN and the BGA components installed. All the other SMT components can be hand soldered. I could do a bulk buy of parts and put them into kits. I have no idea what the cost would be. I know that when I priced all the parts to complete one of Davids partially assembled boards together, I cam up with about $550, so I expect the cost of a kit would be a little higher due to the cost of having the QFN and BGA parts installed by someone with the equipment to do that. If interested in a kit, please let me know at dlwaddel@netzero.net. If there is enough interest, I will investigate further. Don K3DLW ____________________________________________________________ Top Gut Doctor: I Beg Americans To Throw Out This Vegetable dr-pedre-md.com http://thirdpartyoffers.netzero.net/TGL3231/5ccc54262750b54252b60st04duc
|
|
|
|
Re: Odyssey 2 SDR kit
dlwaddel@...
Has been sold.
Don Please note: message attached From: "Peter Ide-Kostic" <on7yi.pik973@gmail.com> To: ody-sdr@groups.io Subject: Re: [ody-sdr] Odyssey 2 SDR kit Date: Mon, 29 Apr 2019 11:14:29 +0900 ____________________________________________________________ Brilliant Trick "Melts" Body Fat Overnight! Do This Tonight LifeBluHealth http://thirdpartyoffers.netzero.net/TGL3231/5ccaf10dddd2710c4ff5st03duc
|
|
|
|
Re: next preorder batch ?
David Fainitski
Sorry, Marc :)
|
|
|
|
Re: next preorder batch ?
Marc olanie
Hi David (I’m not Doug, I’m Marc :- )) ) I just sent you a paypal order… I will play the “in between” guy for this project Don’t worry, we are not interested in fully assembled boards, as we have a nice and efficient reflow oven and a professional “manual” pick and place station.
Wish you a nice 1st of May 1
73’ Marc
De : ody-sdr@groups.io <ody-sdr@groups.io> De la part de David Fainitski via Groups.Io
Hello, Doug
On Mon, Apr 29, 2019 at 11:40 PM, Marc olanie wrote:
|
|
|
|
Re: next preorder batch ?
David Fainitski
Hello, Doug
toggle quoted messageShow quoted text
I still have couple pre-assembled boards for 50 $ but I have no plans to make full assembled boards. David
On Mon, Apr 29, 2019 at 11:40 PM, Marc olanie wrote: A question for a friend of mine : do you intend to run a new batch of pre-assembled Odyssey boards (the one sold at $50 on your web site) ?
|
|
|
|
next preorder batch ?
Marc olanie
Hi David
A question for a friend of mine : do you intend to run a new batch of pre-assembled Odyssey boards (the one sold at $50 on your web site) ? Cheers Marc f6itu
|
|
|
|
Re: Odyssey 2 SDR kit
Peter Ide-Kostic
Please wite to me pm, with the price that you ask. Thanks 73.
On Mon, 29 Apr 2019, 11:06 , <dlwaddel@...> wrote:
|
|
|
|
Re: Schematic - Odyssey 2 SDR
David Fainitski
Hello, Doug
There is no schematic for this project and you will need schematic for correct installing components on the board. All needed info you can find here http://ody-sdr.com/2017/10/15/location-of-the-components-on-the-odyssey-2-transceiver-board/ David
|
|
|
|
Schematic - Odyssey 2 SDR
I purchased a PC board for this project, and have all the components yet to be placed on the board. I've looked around for a schematic for this design, and found only a block diagram. It's going to be rather difficult troubleshooting without a schematic. Where might I find the schematic for this board?
-Doug, W6DSR
|
|
|
|
Odyssey 2 SDR kit
dlwaddel@...
Odyssey 2 SDR kit for sale. Partially assembled board (purchased with some parts installed) and parts to complete the installation (according to the Odyssey 2 parts list). See the web site at "http://ody-sdr.com/" for additional information. Asking $550 including shipping within the USA. Foreign shipping will add $10 to the price. If interested, contact off list at dlwaddel@....
I purchased the parts intending to assemble a system, but have since changed my mind. After all, I have two Hermes systems working. :)) Don
|
|
|
|
Re: wsjt-x and Odyssey 2
Hi David I already do, thank you. Kind regards Kurt
Fra: ody-sdr@groups.io <ody-sdr@groups.io> På vegne af David Fainitski
Hello, Kurt
|
|
|
|
Re: wsjt-x and Odyssey 2
David Fainitski
Hello, Kurt
Use Thetis, not PowerSDR David.
|
|
|
|
Re: wsjt-x and Odyssey 2
Hi Alex Thank for responding. I will see if PowerSDR work with my firmware version Kind regards Kurt
Fra: ody-sdr@groups.io <ody-sdr@groups.io> På vegne af Alex Malyava - K2BB
To answer your question - yes, it is possible. We were running FT8 using Odyssey 2 in 5R8UM Madagascar expedition. How to do it - I have no idea, it was my friends radio and responsibility. I remember that we were running PowerSDR, for FT8 - we started with JTDX and then switched to MSHV. That's about it.
On Mon, Apr 1, 2019 at 9:27 AM Kurt Poulsen <kurt@...> wrote:
|
|
|
|
Re: wsjt-x and Odyssey 2
Hi Marc Nice to hear from you on this reflector That is some good hints, thank you Kind regards Kurt
Fra: ody-sdr@groups.io <ody-sdr@groups.io> På vegne af Marc olanie
Hi Kurt
I’m not a FT8/WSTJ-X user, and I don’t have any Odyssey transceiver. But all rigs belonging to the OpenHPSDR family have approximately the same behavior.
Did you try to install VB Cable https://www.vb-audio.com/Cable/index.htm Banana https://www.vb-audio.com/Voicemeeter/banana.htm or voicemeeter https://www.vb-audio.com/Voicemeeter/index.htm ? These utilities can redirect any audio output to another software audio input and vice versa. In other words, everything going out from SDR-console/SDR-Radio or PowerSDR can be “plugged” on the FT8 audio input The “audio plug” selection can be made in the “receive” tab, “option” icon, “device” branch of the new pop-up window
As you can see, the virtual audio cable input or any voicemeeter audio input can be selected in the “available playback” list. In the QSTJ-X software, audio configuration interface, you’ll have to choose the corresponding “VB Audio cable output” or “voicemeeter output” in you audio input listbox
… and exactly the same way for transmitting (WSTJ-X audio out should use a second “vb-audio input” and the other side of this cable will be “plugged” in the “mic input” of SDR-Console)
I wrote -sorry, in French- a kind of “Virtual cable for dummies” using a FreeDV software as digital modulator, and SDR Sharp or PowerSDR as main SDR client. But images speak by themselves. The general logic approach is definitely the same with WSTJ-X an any kind of SDR client software
73’ Marc f6itu
De : ody-sdr@groups.io <ody-sdr@groups.io> De la part de Kurt Poulsen via Groups.Io
Hi All
|
|
|
