Re: Bootloader update to 2.1


Sid Boyce
 

I do not have a direct connection, it is connected to a 16-port Gigabit switch.
It finds the device but times out during erase.
Increased one timeout value to 4 seconds, powered off and it won't power on.
Removed front panel, pressed the power on switch -- The Green LED's are on but no LCD display. So the Green LED's will go ON/OFF with the power switch, the solid Green on the Ethernet also comes ON/OFF but the IP address is not found.
I don't understand what is happening.

 # grep timeout ./BootLoader_2.1.pyw
            sock.settimeout(1)# Waiting for reply
            sock.settimeout(4)# Waiting for reply
    sock.settimeout(12)
        sock.settimeout(2)# Waiting for reply

Removed front panel, pressed the power on switch -- The Green LED's are on but no LCD display. So the Green LED's will go ON/OFF with the power switch, the solid Green on the Ethernet also comes ON/OFF but the IP address is not found.
I don't understand what is happening.
73 ... Sid.

On 12/06/2019 02:40, David Fainitski wrote:
Hello, Sid.
Yes, it is correct. But before change the bootloader by the same method with using bootloader 2.1 .rbf from this topic, flash to zero's slot.

New firmware flash to needed slot 1 to 3.

David.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks

Join ody-sdr@groups.io to automatically receive all group messages.