|
Sticky
Getting started with Node Red
23 messages
Hi All, For anyone getting started with Node Red, first check out the WiKi to get your Pi loaded with an OS and Node Red. Next, check out these videos that Andy, VA3CW found on YouTube. The videos wil
Hi All, For anyone getting started with Node Red, first check out the WiKi to get your Pi loaded with an OS and Node Red. Next, check out these videos that Andy, VA3CW found on YouTube. The videos will help you to start using Node Red. https://www.youtube.com/results?search_query=opto22+node+red In the files section in this group there are plenty of flows to get you started. If you use a Flex 6000 series radio you can load my VITA49 and FlexRadio flows. I am modifying the FlexRadio flow shortly to automatically detect the model number of your radio and set the meter subscriptions accordingly. Please look for a read.me file in each file folder which describes any node dependencies and any other info required for those flows. A note to people who have uploaded flows - Create a folder with your callsign then upload your flows to that folder. Create a read.me file with Notepad or other text editor listing any extra nodes that you have installed for your flows. This will help new users to get up and running. I can assist in moving previously uploaded flows from the main file folder to your callsign folder. If there is anything else you can think of to help please let me know. 73 Dave wo2x
By
Dave wo2x
·
|
|
Running two Antenna Genius flows
5 messages
I'm using WO2X's flow for the Antenna Genius with zero issues. I recently added another antenna genius in preparation for a second 6600. My issue is that when running both AG flows (with their appropr
|
I'm using WO2X's flow for the Antenna Genius with zero issues. I recently added another antenna genius in preparation for a second 6600. My issue is that when running both AG flows (with their appropr
|
By
Patrick Lenn
·
|
|
DXpedition chart in node
4 messages
I'm struggling to get this webpage to show up in NR. It seems like I've tried just about every combo possible, but I'm sure I'm missing something. Can anyone get a node to show this website? I don't e
|
I'm struggling to get this webpage to show up in NR. It seems like I've tried just about every combo possible, but I'm sure I'm missing something. Can anyone get a node to show this website? I don't e
|
By
Patrick Lenn
·
|
|
WSJT-X Nodes v2.0.1
#node-red-contrib-wsjtx
I've pushed the v2.0.1 code to NPM and Node-Red.org and as is usual, here is a topic to track that version, its inevitable problems, and other such things. I did notice, right after publishing that I
|
I've pushed the v2.0.1 code to NPM and Node-Red.org and as is usual, here is a topic to track that version, its inevitable problems, and other such things. I did notice, right after publishing that I
|
By
Stephen Houser, N1SH
·
|
|
Back at building nodes; WSJT-X encoding!
42 messages
#node-red-contrib-wsjtx
It's officially spring break and we are waiting for another snow storm (6"-12") of snow tomorrow, so why not start fixing some older code and adding more features! I've been reworking the decoding log
|
It's officially spring break and we are waiting for another snow storm (6"-12") of snow tomorrow, so why not start fixing some older code and adding more features! I've been reworking the decoding log
|
By
Stephen Houser, N1SH
·
|
|
File /!1! Flows by Type/ROTORS/AF6SA Wi-Fi Rotator Controllers/Wi-Fi Rotator v1.json uploaded
#file-notice
The following files and folders have been uploaded to the Files area of the nodered-hamradio@groups.io group. /!1! Flows by Type/ROTORS/AF6SA Wi-Fi Rotator Controllers/Wi-Fi Rotator v1.json By: Stefan
|
The following files and folders have been uploaded to the Files area of the nodered-hamradio@groups.io group. /!1! Flows by Type/ROTORS/AF6SA Wi-Fi Rotator Controllers/Wi-Fi Rotator v1.json By: Stefan
|
By
Group Notification
·
|
|
File /!1! Flows by Type/ANTENNA SWITCHES & ANTENNAS/AF6SA Wi-Fi Rotator Controllers/Wi-Fi Rotator v1.json uploaded
#file-notice
The following files and folders have been uploaded to the Files area of the nodered-hamradio@groups.io group. /!1! Flows by Type/ANTENNA SWITCHES & ANTENNAS/AF6SA Wi-Fi Rotator Controllers/Wi-Fi Rotat
|
The following files and folders have been uploaded to the Files area of the nodered-hamradio@groups.io group. /!1! Flows by Type/ANTENNA SWITCHES & ANTENNAS/AF6SA Wi-Fi Rotator Controllers/Wi-Fi Rotat
|
By
Group Notification
·
|
|
Dashboard gauges for the ACOM 1200S?
4 messages
I've been at this for a couple of days now, trying to learn by trial and error. I have a couple of flows up and running and now I would like to have some gauges from the ACOM to a dashboard. Just curi
|
I've been at this for a couple of days now, trying to learn by trial and error. I have a couple of flows up and running and now I would like to have some gauges from the ACOM to a dashboard. Just curi
|
By
Rick N0VT
·
|
|
Ready to use Node Red Flow for the Flexradios
3 messages
Hello All Actually you should be able to take over out-of-the Box Flex flows and only enter the IP address of your own flex - and bingo. This concept is working great for the KM-Tronic Relay etc. What
|
Hello All Actually you should be able to take over out-of-the Box Flex flows and only enter the IP address of your own flex - and bingo. This concept is working great for the KM-Tronic Relay etc. What
|
By
info@hb9ryz.ch
·
|
|
NodeRed Flows for Peet Brothers WX Station Ultimeter 2100
#rpi
I am looking for a flow or flows that will read my Peet Brothers WX Station. From Peet Brothers Website: "ULTIMETER Weather Stations all include serial data input/output ports which may be connected,
|
I am looking for a flow or flows that will read my Peet Brothers WX Station. From Peet Brothers Website: "ULTIMETER Weather Stations all include serial data input/output ports which may be connected,
|
By
John W9KXQ
·
|
|
Resized my Buttons ?
3 messages
Good morning, everyone, somehow, I managed to resize all of my buttons to Small!! I can't for the life of me find where the setting is to change them all back. any ideas would be appreciated. I've att
|
Good morning, everyone, somehow, I managed to resize all of my buttons to Small!! I can't for the life of me find where the setting is to change them all back. any ideas would be appreciated. I've att
|
By
Stuart Brown VK6BG
·
|
|
Weather Station
14 messages
Hi I would be interested in recommendations of a home weather stations that people are using and have integrated into their Node Red flows and dashboards. many thanks Pete
|
Hi I would be interested in recommendations of a home weather stations that people are using and have integrated into their Node Red flows and dashboards. many thanks Pete
|
By
Pete Green
·
|
|
Web page / image / desktop snap to dashboard and email - example flow
4 messages
Hi All, As promised here is my example flow showing how I grab images in different ways to include them on my Node-RED dashboard pages. Before importing the flow you should install the following nodes
|
Hi All, As promised here is my example flow showing how I grab images in different ways to include them on my Node-RED dashboard pages. Before importing the flow you should install the following nodes
|
By
thebaldgeek
·
|
|
Switch Node not working
7 messages
Hi All What am I missing here? You can see that TRUE is being injected and that the Off Icon is set to false and the button shows as off. I have about 16 of these buttons and only just this one. Weird
|
Hi All What am I missing here? You can see that TRUE is being injected and that the Off Icon is set to false and the button shows as off. I have about 16 of these buttons and only just this one. Weird
|
By
Michael Walker
·
|
|
N1MM+ Dashboard
2 messages
I am Field Day chair for my radio club. I also will be responsible for the networking and laptop configurations. I used Kyle's dashboard last year. I am now beginning to get ready for this years field
|
I am Field Day chair for my radio club. I also will be responsible for the networking and laptop configurations. I used Kyle's dashboard last year. I am now beginning to get ready for this years field
|
By
Marty Boroff
·
|
|
Code related :
https://groups.io/g/nodered-hamradio/files/5JEF/V3
|
https://groups.io/g/nodered-hamradio/files/5JEF/V3
|
By
ON5JEF
·
|
|
Can be usefull for a K3ng rotor firmware
https://groups.io/g/nodered-hamradio/files/5JEF/V3 In brief : Thanks to the brave Man who has inform me me to the existence of group. The code should be a skeleton of a open source rotor control... Ma
|
https://groups.io/g/nodered-hamradio/files/5JEF/V3 In brief : Thanks to the brave Man who has inform me me to the existence of group. The code should be a skeleton of a open source rotor control... Ma
|
By
ON5JEF
·
|
|
Number display for Solar data?
38 messages
Hi I have imported a flow for Solar data from the files secion, this searches for text from https://services.swpc.noaa.gov/text/wwv.txt but it's displayig the wrong numbers. The SFI is showing 1610 in
|
Hi I have imported a flow for Solar data from the files secion, this searches for text from https://services.swpc.noaa.gov/text/wwv.txt but it's displayig the wrong numbers. The SFI is showing 1610 in
|
By
Rich M5RIC
·
|
|
Expert Amplifier Temp (Lower)
6 messages
Hello. i have running very good SPE Expert amplifier nodered from WB2WGH on 1.5K-FA. What's Temp (Lower) ? This sensor is only on 2K-FA or combiner? On serial reply on 1.5K-FA are empty Thanks , Migue
|
Hello. i have running very good SPE Expert amplifier nodered from WB2WGH on 1.5K-FA. What's Temp (Lower) ? This sensor is only on 2K-FA or combiner? On serial reply on 1.5K-FA are empty Thanks , Migue
|
By
Miguel EC5W
·
|
|
Map_Interface_wb0smx_20210806 (integration of localized map)
11 messages
First, thanks Randy for the ERC-4 flow and modified map interface. I have them integrated into my dashboard. Works great! I also have a map Dave prepared for me for my QTH (Syracuse, NY) and can't fin
|
First, thanks Randy for the ERC-4 flow and modified map interface. I have them integrated into my dashboard. Works great! I also have a map Dave prepared for me for my QTH (Syracuse, NY) and can't fin
|
By
Ronald Panetta, WB2WGH
·
|
