Have been uploaded to: http://www.w1hkj.com/files/xmls/icom/ https://sourceforge.net/projects/fldigi/files/xmls/icom/ courtesy of Lutz, DH7LK. 73, David, W1HKJ

I received the following from Bob Folmar, KB3VS. Please respond directly to Bob, cc to me if you can assist. 73, Dave, W1HKJ w1hkj@... Dear Dave, I am not sure if you have been notified of this or not

The log does not need to be in Cabrillo format to submit to ARRL. A simple text file output suffices and passes ARRL muster. I submitted my log in that format using the on-line pdf submission applicat

See original report on flmsg arq behavior (below). The 8PSK250F mode was designed for fast turn around VHF/UHF SSB transmissions. My guess is that the HF transceivers were introducing additional delay

at http://www.w1hkj.com/alpha/fldigi/ fldigi-4.1.13.18.tar.gz fldigi-4.1.13.18_i386.dmg fldigi-4.1.13.18_setup.exe fldigi-4.1.13.18_x86_64.dmg Fri Jun 26 10:06:00 2020 - alpha 4.1.13.18 Field Day Logg

Hey Dave and all! We were testing out the WX reporting forms in FLmsg. We found the "Storm Report" that we received (created in FLmsg 4.0.14) would NOT open up in FLmsg (ver 4.0.16) when we did a DnD

at http://www.w1hkj.com/alpha/fldigi/ fldigi-4.1.13.17.tar.gz fldigi-4.1.13.17_i386.dmg fldigi-4.1.13.17_setup.exe fldigi-4.1.13.17_x86_64.dmg Thu Jun 25 08:18:00 2020 - alpha 4.1.13.17 flarq update *

at http://www.w1hkj.com/files/flmsg flmsg-4.0.16.tar.gz flmsg-4.0.16_i386.dmg flmsg-4.0.16_setup.exe flmsg-4.0.16_x86_64.dmg and at Source Forge. Thu Jun 25 09:44:44 2020 - Version 4.0.16 Mars Army *

at http://www.w1hkj.com/alpha/fldigi fldigi-4.1.13.14.tar.gz fldigi-4.1.13.14_i386.dmg fldigi-4.1.13.14_setup.exe fldigi-4.1.13.14_x86_64.dmg testchars.eml Use the file testchars.eml to test the trans

Hi Everyone, One of the NBEMS experts here talked me into configuring the Fldigi NBEMS interface to Transfer direct to executing flmsg. With this setting the Flmsg doesn't open up but a window called

at http://www.w1hkj.com/alpha/fldigi/ fldigi-4.1.13.08.tar.gz fldigi-4.1.13.08_i386.dmg fldigi-4.1.13.08_setup.exe fldigi-4.1.13.08_x86_64.dmg Make sure that the executables look like this (Windows-7)

at http://www.w1hkj.com/alpha/fldigi fldigi-4.1.13.07.tar.gz fldigi-4.1.13.07_i386.dmg fldigi-4.1.13.07_setup.exe fldigi-4.1.13.07_x86_64.dmg Sun Jun 14 22:51:42 2020 -0500 flarq composer * change tex

-------- Forwarded Message -------- Subject: Fldigi for research Date: Sun, 14 Jun 2020 20:35:18 +0300 From: Haris SV1GRB <sv1grb@...> To: w1hkj <w1hkj@...> Really interesting David! https://hamsci.or

I have been running FLDIGI for years in 'analog' mode (speaker to microphone and vice versa). I recently got an Icom IC-7300 and figured it was time to go to pure digital. Installed the latest FLDIGI

At http://www.w1hkj.com/alpha/fldigi/ fldigi-4.1.13.07.tar.gz fldigi-4.1.13.07_i386.dmg fldigi-4.1.13.07_setup.exe fldigi-4.1.13.07_x86_64.dmg Fri Jun 12 06:44:00 2020 - alpha 4.1.13.07 . Cabrillo log

The ARES group in the North Kansas City area routinely sends a test image using MFSK32 to test signal path and other properties. We have observed a couple of behaviors that I would like to suggest inv

Our New Hampshire ARES is looking to upgrade our hospital network. We are looking for recommendations for a VHF/UHF dual band FM radio model that either has a data port for connecting a soundcard, or

I just had a wonderful CW QSO on 40m using FLRIG to "key" the CW port of my Icom radio. The radio (7610) had the "semi-break-in" (VOX) turned ON with about a 1 second delay to return to receive after

Hi All Larry just solved my Red Cross forms not being interactive. Last problem, I hope, FLMSG doesn't seem to save the sent message in my file where I find my sent FLMSG messages. Do I save it form t

Hi All I downloaded the Red Cross forms from Sourceforge. I then extracted the files. I then copied each one and dropped it into the custom file. I clicked on the flmsg > forms>custom and all nine fil