Is anybody actually using the FL-suite to send and receive messages? I see a lot a discussion here about the software but no references to it's use for sending narrowband emergency messages. I have be

You probably need to install the OS X driver for the SCU-17. I'm pretty sure it uses the Silicon Labs 2102 USB bridge. https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp

I am on a few nets that use voice and data on the same net. When I need to send data, I have to change the radio to USB-D, then back to USB after the data is sent. Is it possible for fldigi to do this

Received from Mike Agner, KA3JJZ I know that you're probably just trying to stick with showing the various amateur modes, but since FLDigi also handles some non-ham modes, i thought you might want to

I installed fldigi 4.0.18 on a r pi 3b and it does not have hamlib included in the compile. After I configure the program it says hamlib - no. I installed and compliled the latest version of hamlib (3

Greetings, all, Does anyone know & have experience with the Win 10 OS, for ease of installing "Non Win" software? My only experience with computing was BASIC, with the days of MS-DOS in the picture. N

The fldigi Wiki is a user community maintained resource of questions/answers and how-to documents. I have just completed detailing the process of building native and cross compilation targets of fldig

Hi All, OK, I would like to have FLDIGI (4.0.18) setup and working on my iMac that runs macOS High Seirra. The interface is the YAESU SCU-17. The iMac uses VMFusion to allow me to run any Windows base

Greetings, With FLDigi 4.0.18 installed on Debian Slink and Raspbian we have noticed that the ``Send Alert'' (|} function does not respond with an ``ack'' when the target operator closes the dialog bo

Any one using a Yaesu FT-991 with Fldigi for FSQ. When using the FT-991 the audio level pegs at the top and won't let the squelch open. Any comments would be appreciated. Thank you. Regards, WT Real h

Here is an alternative that does not require changing the fltk source. Add this line to src/main.cxx, just before int ret = Fl::run(); change to Fl::set_color(FL_SELECTION_COLOR, 0, 0, 128); int ret =

Dear Group, Can someone go over the steps to have Fldigi display or change the Frequency being displayed? I must be missing something in the setup. Tnx, Vic Sent From : Extra Class Amateur Radio Opera

2018 ARRL/TAPR DCC Digital Communications Conference Albuquerque, NM www.tapr.org/dcc September 14 - 16, 2018 Sheraton Albuquerque Airport Hotel Registration https://www.starwoodmeeting.com/events/sta

There is a simple setup for PowerSDR with early versions of Windows, but not with Windows 10 and the new VAC. Could someone who has done it please add the correct .xml file to the collection at XMLS a

WT, So far I have not been able to duplicate the crash in this machine (MacOSX) going to need a full backtrace using gdb as indicated by Dave. Just for testing purposes try increasing the hamcast inte

A brief description of the equipment. FT-450D rig. SignaLink USB interface. Raspberry Pi 3 B+. I recently switched from the USB Sound Card that I used for interface with some cables I purchased throug

Please test the newest flrig alpha at http://www.w1hkj.com/alpha/flrig/ if you are experiencing issues in 1.3.40 and were not present in earlier version. flrig-1.3.41.21.tar.gz flrig-1.3.41.21_i386.dm

Thanks Dave. I have .19 installed currently. I will remotely update the software and test the rig when I get home (currently offline (stdby) Florida lightning). John

I am new to fldigi and I am trying to use it. Around 14.074mhz, the fldigi waterfall shows 4-6 streams for about 8 seconds and then the frequency of the streams shifts after a brief pause. This cycle

At w1hkj.com: fldigi-4.0.18.tar.gz fldigi-4.0.18_i386.dmg fldigi-4.0.18_macos.dmg fldigi-4.0.18_ppc.dmg fldigi-4.0.18_setup.exe and at Source Forge: https://sourceforge.net/projects/fldigi/files/fldig